Accucold VT65MBIIFADA Manual

Accucold Fryser VT65MBIIFADA

Læs gratis den danske manual til Accucold VT65MBIIFADA (1 sider) i kategorien Fryser. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Accucold VT65MBIIFADA, eller vil du spørge andre brugere om produktet?

Side 1/1
DETAIL A
DETAIL B
A
BB
A
1) Remove Door from Chassis by removing
Top and Bottom Hinges. Keep screws,
discard hinges.
using countersunk screws.
3) Screw Door Panel to Frame.
4) Slide Frame over Refrigerator door and attach
with 1 screw on each side, center of door.
5) Screw Bottom Pc to Door.
6) Attach Top Brace to Frame with 1 screw on side.
Attach Bottom Brace in the same manner.
7) Drill a hole thru the Top and Bottom Frame using
the Braces as a guide with a 5/32" drill bit. Install
screws to nish attaching the Top and Bottom
Braces securely to the Frame.
8) Drill a hole into the Door Panel from the top and
bottom using the Braces as a guide with a 1/4"
drill bit. Do not exceed 5/8". This is the hole that
the door will pivot on.
9) Remount the door using the supplied Top and
Bottom Hinges.
Top Hinge
Bottom Brace
Frame
Bottom
Pc
Step 7
Step 8
Top Brace
Instructions for
Integrated Frame
Summit Appliance
1-718-893-3900
(Built-In Application)
Door Panel
Hinge
or


Produkt Specifikationer

Mærke: Accucold
Kategori: Fryser
Model: VT65MBIIFADA

Har du brug for hjælp?

Hvis du har brug for hjælp til Accucold VT65MBIIFADA stil et spørgsmål nedenfor, og andre brugere vil svare dig