Acer BE270K Manual

Acer LCD-skærmen BE270K

Læs gratis den danske manual til Acer BE270K (3 sider) i kategorien LCD-skærmen. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Acer BE270K, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the MiniDP-MiniDP and/or MHL (optional)

and /or DP (optional) and/or HDMI (optional) input socket of the

monitor, and the MiniDP-MiniDP and/or MHL (optional) and/or DP

(optional) and/or HDMI (optional) output socket of the graphics card

on the computer. Then tighten the thumbscrews on the signal cable

connector.

3. Connect the USB Cable(Optional)

Connect the USB 3.0 cable to port for fast charge.

Connect the USB 3.0 cable to port.

4. Insert the monitor power cable into the power port at the back of the

monitor.

5. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

FreeSync (HDMI/DP):

It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content

frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.

English

External controls

1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates

standby/ power saving mode.

3&4 </> Minus / Plus If the OSD is active, press the or buttons to toggle Minus Plus

between the OSD options. If the OSD is inactive, press the Minus

or buttons to adjust the volume. Plus (Optional)

5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the

OSD.

6 PIP picture in

picture hotkey

Use the PIP hotkey to active the picture-in-picture function.

7:Em p o w e r in g

Key

Press this button to select scenario mode.

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This device generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television reception, which can be

determined by turning the device off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and

other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS

Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting

of ecodesign requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance

with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B

limitsmay beattached to thisequipment. Operation with non-certiedperipheralsislikelytoresultin

interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user authority,

which is granted by the Federal Communications Commission, to operate this product.

In order to prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Notice: Canadian users

CAN ICES-3(B)/NMB-3(B)

Restriction on Hazardous Substances statement (India)

This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent

Produkt Specifikationer

Mærke:	Acer
Kategori:	LCD-skærmen
Model:	BE270K

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer BE270K stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

LCD-skærmen Acer Manualer

Acer XF240QP Manual

5 Oktober 2022

Acer EB321HQUD Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

LCD-skærmen Manualer

Nyeste LCD-skærmen Manualer

BenQ G2025HDA Manual

5 Oktober 2022

BenQ E900T Manual

5 Oktober 2022

Samsung DE40A Manual

5 Oktober 2022

Abus TVAC10010 Manual

5 Oktober 2022

Philips 220BW8ES Manual

5 Oktober 2022

Philips 241B8QJEB Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022