Acer K242HLD Manual

Acer LCD-skærmen K242HLD

Læs gratis den danske manual til Acer K242HLD (3 sider) i kategorien LCD-skærmen. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Acer K242HLD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

English

Attaching th

Attaching thAttaching the monitor

e monitor

e monitor e monitor to the base

to the base

to the base to the base

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

 Turn off the LCD monitor and unplug the power cord.

 Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely

damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform

servicing of any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor

outside this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances

occur:

 Monitor-to-PC signal cable is frayed or damaged.

 Liquid spills onto the LCD monitor or the monitor is exposed to rain.

 The LCD monitor or case is damaged.

Package contents

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power

cord.

back of the monitor.

into a nearby electrical outlet.

Attaching th

Attaching thAttaching the monitor

e monitor

e monitor e monitor to the base

to the base

to the base to the base

1 Remove the monitor base from the packaging and place it on a stable and level workspace.

2 Remove the monitor from the packaging.

3 Align the release button at the buttom of the monitor with the corresponding slot at the bottom of

the base. A clicking sound signifies that the monitor has been securely attached to the base.

Attaching th

Attaching thAttaching the monitor

e monitor

e monitor e monitor to the base

to the base

to the base to the base

LCD

monitor Power cord VGA cable

(optional)

DVI cable Quick start

(optional) guide

3. Insert the monitor power cable into the power port at the

4. Plug the power cords of your computer and your monitor



HDMI Cable

(Op ion l)t a

2. Connect the signal cable to the VGA and/or DVI-D/HDMI

output

the computer. Then tighten

the signal cable connector.

input socket of the monitor, and the

VGA and/or DVI-D/

(optional)

socket of

the graphics card on the

thumbscrews on

HDMI

(optional)

English

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant

to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This device generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this device does cause harmful interference to radio

or television reception, which can be determined by turning the device off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the device and receiver.

 Connect the device into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements

and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and

RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for

the setting of ecodesign requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain

compliance with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B

limits may be attached to this equipment. Operation with non-certified peripherals is likely to result

in interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user

authority, which is granted by the Federal Communications Commission, to operate this product.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Notice: Canadian users

&$1 ,&(6%10%%

6 Auto Auto If the OSD is active, press to exit the OSD. Once the OSD is inactive, Auto

press and the monitor will automatically optimize the display Auto

position, focus, and clock of your display.

Empowering

Key

a. When the OSD menu is active, this button will act as the exit key ( exit

OSD menu).

b. When the OSD menu is inactive, press this button to select scenario

mode.

External controls



1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates

standby/ power saving mode.

3&4 </> Minus / Plus If the OSD is active, press the or buttons to toggle between Minus Plus

the OSD options. If the OSD is inactive, press the or buttons to Minus Plus

adjust the volume. (Optional)

5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.

In order to prevent damage to the monitor, do not lift the monitor by its base.

Produkt Specifikationer

Mærke:	Acer
Kategori:	LCD-skærmen
Model:	K242HLD

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer K242HLD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

LCD-skærmen Acer Manualer

Acer XF240QP Manual

5 Oktober 2022

Acer EB321HQUD Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

LCD-skærmen Manualer

Nyeste LCD-skærmen Manualer

BenQ G2025HDA Manual

5 Oktober 2022

BenQ E900T Manual

5 Oktober 2022

Samsung DE40A Manual

5 Oktober 2022

Abus TVAC10010 Manual

5 Oktober 2022

Philips 220BW8ES Manual

5 Oktober 2022

Philips 241B8QJEB Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022