Acer SA240YA Manual

Acer LCD-skærmen SA240YA

Læs gratis den danske manual til Acer SA240YA (3 sider) i kategorien LCD-skærmen. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Acer SA240YA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently

2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this

range may result in permanent damage.

6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Package contents

LCD

monitor

Quick start

guide

VGA

cable

Adapter

AC Power

cord

HDMI cable

(Optional)

Audio cable

(Optional)

Adjusting the monitor base

1 Carefully remove the monitor from its packaging.

• The monitor base is attached onto the monitor before shi ment and it is undetachable. p

2 Pull the monitor base out fully so that the monitor can be placed on a stable surface in the upright position.

Secure the monitor base by turning the white screws (at the bottom of the base) using the integrated tab or a suitable coin.

Connecting your monitor to a computer

1 Turn off your computer and unplug your computer’s power cord.

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

.noitacol ruoy ni elbaliava rewop CA eht htiw etarepo ot detar yllacirtcele si rotinom ruoy taht erus eB :neercs rotinom DCL eht naelc oT 1

· NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.

· PLEASE DO NO T USE A NY AMM ONIA OR ALCOHOL-BASED CLEA NERS ON THE LCD DISPLA Y SCREEN OR CASE.

· Acer will not be liable for da mage resulting from use of any a mmonia or alcohol-based cleaners.

2-1 Connect Video Cable

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the VGA video cable to the computer.

2-2 Connect HDMI Cable (Only HDMI-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the HDMI cable to the computer.

3. Connect the Audio Cable. (Only Audio-Input Model) (Optional)

4. Insert the monitor power cable into the power port at the back of the monitor.

5. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

Panel controls

FreeSync:

It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical

content frame rates for power efcient, virtually stutter free and low-latency display update.

123456

No. DescriptionIcon Item

1Power button/

indicator

Turns the monitor on/off. Blue indicates power on. Blinking blue

indicates standby/power saving mode.

2OSD function a. Press to view Main page. Press again to enter next function

in the Function Menu.

b. When the Function Menu is active, press this key selected or

move to the next function.

3Input a. Press to view Main page. Press again to enter Input select

function.

b. When the Function Menu is active, press this button selected

or move to the previous function.

4Volume a. Press to view Main page. Press again to enter Volume

adjustment function.

b. When the Function Menu is active, this button will enter a

selection in the OSD.

5Brightness

a. Press to view Main page. Press again to enter brightness

adjustment function.

b. When the Function Menu is active. Press to return previous Menu

or exit current Menu.

6Mode

a. When the Main page is active. Press to trigger the Game mode

control

b. When the Function Menu is active, press to exit current Menu.

English

Produkt Specifikationer

Mærke:	Acer
Kategori:	LCD-skærmen
Model:	SA240YA

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer SA240YA stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

LCD-skærmen Acer Manualer

Acer XF240QP Manual

5 Oktober 2022

Acer EB321HQUD Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

LCD-skærmen Manualer

Nyeste LCD-skærmen Manualer

BenQ G2025HDA Manual

5 Oktober 2022

BenQ E900T Manual

5 Oktober 2022

Samsung DE40A Manual

5 Oktober 2022

Abus TVAC10010 Manual

5 Oktober 2022

Philips 220BW8ES Manual

5 Oktober 2022

Philips 241B8QJEB Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022