Acer V276HLW Manual

Acer LCD-skærmen V276HLW

Læs gratis den danske manual til Acer V276HLW (3 sider) i kategorien LCD-skærmen. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Acer V276HLW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the VGA (optional) and/or DVI (optional)

and/or HDMI (optional) input socket of the monitor, and the VGA

(optional) and/or DVI (optional) and/or HDMI (optional) output

socket of the graphics card on the computer. Then tighten the

thumbscrews on the signal cable connector.

3. Optional: Connect the audio input socket (AUDIO IN) of the LCD

monitor and the line-out port on the computer with the audio cable.

4. Insert the monitor power cable into the power port at the back of the

monitor.

5. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user manual for more instruction.

External controls

1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates standby/

power saving mode.

3&4 </> Minus / Plus If the OSD is active, press the or buttons to toggle between the OSD Minus Plus

options. If the OSD is inactive, press the or buttons to adjust the Minus Plus

volume. (Optional)

5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.

6 Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press

Auto and the monitor will automatically optimize the display position, focus, and

clock of your display.

English

7 Empowering Key a. When the OSD menu is active, this button will act as the exit key ( exit OSD

menu).

b. When the OSD menu is inactive, press this button to select scenari o mode.

For displays with glossy bezels the user should consider the placement of the display as the bezel cause

disturbingreectionsfromsurroundinglightandbrightsurfaces.

Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which

can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant

provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive

2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with EMC

regulations.

Notice: Peripheral devices

Onlyperipherals(input/outputdevices,terminals,printers,etc.)certiedtocomplywiththeClassBlimitsmaybeattached

tothisequipment.Operationwithnon-certiedperipheralsislikelytoresultininterferencetoradioandTVreception.

Caution

Changesormodicationsnotexpresslyapprovedbythemanufacturercouldvoidtheuserauthority,whichisgrantedby

the Federal Communications Commission, to operate this product.

In order to prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

Notice: Canadian users

CAN ICES-3(B)/NMB-3(B)

Disposal of waste equipment by user in private household in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of

with your other household waste. Instead, it is your responsibility to dispose of your waste equipment

by handing it over to a designated collection point for the recycling of waste electrical and electronic

equipment. The separate collection and recycling of your waste equipment at the time of disposal

will help to conserve natural resources and ensure that it is recycled in a manner that protects

human health and the environment. For more information about where you can drop off your waste

equipmentforrecycling,pleasecontactyourlocalcityofce,yourhouseholdwastedisposalservice

or the shop where you purchased the product.

Produkt Specifikationer

Mærke:	Acer
Kategori:	LCD-skærmen
Model:	V276HLW

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer V276HLW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

LCD-skærmen Acer Manualer

Acer XF240QP Manual

5 Oktober 2022

Acer EB321HQUD Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

LCD-skærmen Manualer

Nyeste LCD-skærmen Manualer

BenQ G2025HDA Manual

5 Oktober 2022

BenQ E900T Manual

5 Oktober 2022

Samsung DE40A Manual

5 Oktober 2022

Abus TVAC10010 Manual

5 Oktober 2022

Philips 220BW8ES Manual

5 Oktober 2022

Philips 241B8QJEB Manual

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022