Foreword
IMPORTANT SAFETY INSTRUCTIONS
- 2 -
When using this unit, basic safety precautions should always be followed, including
the following:
Thank you for purchasing "amaran" LED photography lights - amaran T2c.
Amaran T2c is amaran newly designed cost performance light fixture. Compact
structure design, compact and light , excellent texture. Has a high performance
level, such as high brightness, high color rendering index, can adjust the brightness,
etc. It can be used with variety of lighting accessories to achieve lighting effects and
enrich product usage patterns. So that the product to meet the needs of different
occasions light control, easy to achieve professional level photography.
1. Read and understand all instructions before using.
2. Close supervision is necessary when any fixture is used by or near children.
Do not leave the fixture unattended while in use.
3. Care must be taken as burns can occur from touching hot surfaces.
4. Do not operate the fixture if a cord is damaged, or if the fixture has been
dropped or damaged, until it has been examined by qualified service personnel.
5. Position any power cables such that they will not be tripped over, pulled,
or put into contact with hot surfaces.
6. If an extension cord is necessary, a cord with an amperage rating at least equal to
that of the fixture should be used. Cords rated for less amperage than the fixture
may overheat.
7. Always unplug the lighting fixture from the electrical outlet before cleaning
and servicing, or when not in use. Never yank the cord to remove the plug from
the outlet.
8. Let the lighting fixture cool completely before storing. Unplug the power cable
from lighting fixture before storing and store the cable at assigned space of the
carrying case.
9. To reduce the risk of electric shock, do not immerse this fixture in water or any
other liquids
10. To reduce the risk of fire or electric shock, do not disassemble this fixture.
Contact cs@aputure.com or take the lighting fixture to qualified service personnel
when service or repair is required. Incorrect reassembly may cause electric shock
when the lighting fixture is in use.
11. The use of any accessory attachment not recommended by the manufacturer
may increase the risk of fire, electric shock, or injury to any persons operating the
fixture.
12. Please power this fixture by connecting it to a grounded outlet.
13. Please do not block the ventilation or do not look at the LED light source directly
when it is powered on. Please do not touch the LED light source in any condition.
14. Please do not place the LED lighting fixture near any flammable object.
15. Only use a dry microfiber cloth to clean the product.
