Amazon Smart Sticky Note Printer Manual

Amazon Ikke kategoriseret Smart Sticky Note Printer

Læs gratis den danske manual til Amazon Smart Sticky Note Printer (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Amazon Smart Sticky Note Printer, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Let’s get started

Troubleshooting

If you purchased your Smart Sticky Note Printer as a gift, you can

forward this guide to your gift recipient to help them with set up!

Peel the safety sticker o the printer and press the eject button to

open the printer door. Load the paper roll as shown above, paying

attention to the orientation of the roll. Make sure that the end of the

paper roll is sticking out of the slot on your printer before you close it.

Place your printer within 30 feet of a compatible Echo device

and plug the printer into a power outlet using the included adapter.

Your printer will try to connect to your home wi network using your

stored credentials. It may take a few minutes to connect to your

home wi.

If your printer cannot connect to your home wi, it will print the

message shown below. Please note: You will need to use the Alexa

app on an Android phone / iPhone 7 (or later)* for setup.

Make sure that you have the latest version of the Alexa app on your

phone. In the app, tap the ‘More’ icon, then Add a Device>Printer.

Choose ‘Amazon’ on the next screen. You can now follow the on-screen

directions to connect your printer to your home wi.

*Setting up your printer using an Apple iPhone 6s or earlier is not possible.

Once your printer’s LED action button turns solid blue, nish set-up

by saying “Alexa, discover my printer.” You’re now ready to make

your rst print! You can check your printer is paired by saying “Alexa,

print a test page.”

If the printer successfully connects to your home wi, it should print

the above message.

1. Install the paper roll

2. Plug in and connect your printer

3. Pair your printer with your Echo

I have more than one printer - how do I control

which one Alexa uses?

All my prints are blank

My Prints are spotty, streaky or faded

Add your printer using the Alexa app

If your printer cannot connect to your

home wi network automatically

When you plug in your printer, it should print the above message.

Your printer will now print the message above. Once your printer’s

LED action button turns blue, nish set-up by saying “Alexa,

discover my printer.” You’re now ready to make your rst print! You

can check your printer is paired by saying “Alexa, print a test page.”

Alexa didn’t discover my printer

Ensure the LED action button on your printer is solid blue and try to

discover the printer again by saying “ ”.Alexa, discover my printer

You can also try discovery via the Alexa App (Devices> Add> Printer>

Other> Discover Devices). To pair your printer, you MUST have a

compatible Echo device.*

Be sure your Echo device is:

Powered ‘On’

On the same Wi-Fi network (SSID) as the printer

Registered to the same Amazon account as the printer

*Your printer is compatible with all Echo devices EXCEPT: Echo (1st Gen),

Echo Dot (1st Gen), Echo Plus (1st Gen), Echo Dot Kids Edition, Echo Spot,

or Amazon Tap.

You cannot pair the printer using the Alexa app alone.

Some print types (such as voice

notes) are automatically routed to

your Smart Sticky Note Printer. You

can direct all prints to the printer of

your choice by disabling the other

printer(s) using the Alexa App.

The paper roll may be installed incorrectly. Remove and re-insert it,

paying particular attention to the orientation of the paper. Make sure

that the sticky side faces up (see diagram at top of page).

If your printouts have vertical stripes, are spotty or faded, clean the

printer heads. Click here to see a video showing how to do it.

1. Unplug your printer and allow it to cool down.

2. Open the printer and remove the paper roll.

3. Locate the printer heads and gently wipe them with a clean, dry cloth.

4. Replace the paper roll and close the printer.

5. Plug in your printer.

Click here to see a video showing how to do it.

Pair your printer with Alexa

Need help with setup?

Amazon’s Customer Service team is available 24/7 at the Smart

Sticky Note Printer .support page

Produkt Specifikationer

Mærke:	Amazon
Kategori:	Ikke kategoriseret
Model:	Smart Sticky Note Printer

Har du brug for hjælp?

Hvis du har brug for hjælp til Amazon Smart Sticky Note Printer stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Amazon Manualer

Amazon Echo Pop Kids Manual

14 November 2024

Amazon Echo Hub Manual

30 August 2024

Amazon Echo Auto (1st Gen) Manual

22 August 2024

Amazon Echo Show 5 Kids (3rd Generation) Manual

21 August 2024

Amazon Echo Pop Manual

20 August 2024

Amazon Echo Buds (2nd Gen) Manual

8 August 2024

Amazon Echo Show 8 (2nd Generation) Manual

6 August 2024

Amazon Echo Show (1st Generation) Manual

4 August 2024

Amazon Smart Sticky Note Printer Manual

30 Juli 2024

Amazon Echo Connect Manual

25 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet XGPN-100 Manual

15 Juni 2025

Proficook PC-EKA 1283 Manual

15 Juni 2025

OmniMount OBSP8 Manual

15 Juni 2025

Levenhuk FS10 Manual

15 Juni 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

ElectriQ STRV-W1-B Manual

15 Juni 2025

Adler AD 4521 Manual

15 Juni 2025

AMX HydraPort HPX-AV102 Manual

15 Juni 2025

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025