AMX CBL-HDMI-FL2 Manual

AMX Ikke kategoriseret CBL-HDMI-FL2

Læs gratis den danske manual til AMX CBL-HDMI-FL2 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om AMX CBL-HDMI-FL2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

QUICK START GUIDE

CBL-x-FL2-16 Flat Cables

Overview

Flat cables benefits include weight reduction, space efficiency, flexibility and strength.

AMX flat cables feature MyTurn Ready Over-mold connector ends. With the addition of a

MyTurn™ Source Selection Button (FG554-21) that clips into the specially designed

groove built into the connector housing, participants can switch their content to the

display at the press of a button without moving from their seat.

The MyTurn Source Selection Button communicates with a MyTurn Source Selector

Receiver (FG554-23) which connects to a Solecis digital switcher, AMX master

controller (with I/O), or DVX all-in-one presentation switcher. Any MyTurn-Ready cable

may be equipped with the MyTurn solution.

HDMI 4K60 MyTurn-Ready Flat Cable

The HDMI directional cables (CBL-HDMI-FL2-xx) are available in 16 and 32 ft lengths.

The end labeled Display connects to the display device (example: HDTV monitor) and

has a built-in lock-down screw. The source end of the cable is not labeled (FIG. 1): .

HDMI Directional Cable Notes

• Avoid using an extension cable on either end of the HDMI cables without using

AMX Powered HDMI 2.0 Cable Extender (FG558-21).

• Connecting the cable backwards, with the connector labeled "DISPLAY" into the

video source, will not damage the equipment. However when incorrectly installed,

the cable will not transmit a signal.

Cat6 Ethernet Flat Cable

The MyTurn-Ready Cat6 Ethernet cable (CBL-ETH-FL2-16) with integrated strain relief

(not MyTurn Ready) is 16 ft with a flat cable design

. Cat6 features more stringent

specifications for crosstalk and system noise, plus performance of up to 250 MHz

(suitable for 10/100/1000Base-T/TX and 10GBase-T).

DisplayPort 4K60 MyTurn-Ready Flat Cable

The DisplayPort to DisplayPort (DP-DP)

cable (

CBL-DP-FL2-16

) is

directional

and includes

an additional DP-HDMI adapter

The connector labeled Display must be connected to the

display device (example: HDTV monitor). The source end of the cable is not labeled

(FIG. 3)

: .

Mini DisplayPort 4K60 MyTurn-Ready Flat Cable

The Mini DisplayPort to DisplayPort

(mDP-DP) cable (

CBL-MDP-FL2-16

) is

directional

and

includes an additional DP-HDMI adapter

The DP connector labeled Display must be

connected to the display device (example: HDTV monitor). The mDP source end of the

cable is not labeled

(FIG. 4)

DP Directional Cable Notes

• Connecting the cable backwards, with the connector labeled "DISPLAY" into the

video source, will not damage the equipment. However when incorrectly installed,

the cable will not transmit a signal.

HDMI Adapter

The DP-DP and mDP-DP cables come with an additional DP-HDMI adapter

(FIG. 5)

. It

connects to the Display end of these cables to interface with HDMI ports on some displays or

the AMX HDMI Extender (

FG558-21

FIG. 1 HDMI DIRECTIONAL FLAT CABLE

CBL-HDMI-FL2-16/32 CABLE SPECIF ICATIONS

FG#: • FG10-2192-16 - 16ft (5m)

• FG10-2192-32 - 32ft (10M)

Cable Length • 16.4 ft or 32 ft (5m or 9.75m)

Connectors: • SOURCE: HDMI (male) - connects to the source device.

• DISPLAY: HDMI (male) - connects to the display device.

• Molded Strain Relief • MyTurn ready Over-Mold

Data Rate: • 18 Gbps

Signal Support: • 4K@60Hz

Color: • 48 Bits (16 bits per color)

Supported Features: • Deep Color, 3D, HEC, ARC

Plating: • 24K Gold

CBL-ETH-FL2-16 CABLE SPECIF ICATIONS

FG#: • FG10-2194-16

Cable Length • 16.4 ft (5m)

Connectors: • RJ45 (male, both ends)

• Molded Strain Relief

Category: • Cat6

Data Rate: • 1000Base-T (Gigabit Ethernet)

Wiring: • 26 AWG

• 4 twisted pairs

• Single-core

Plating: • 24K Gold

FIG. 2 CAT6 ETHERNET FLAT CABLE

Display End

Source End

MyTurn-Ready Over-mold

RJ45

Matte Black Cat6 Ethernet Flat Cable

FIG. 3 DP-DP DIRECTIONAL FLAT CABLE

CBL-DP-FL2-16 CABLE SPECIF ICATIONS

FG#: • FG10-2193-16 - 4K60 MyTurn Ready Flat Cable

Cable Length • 16.4 ft (5m)

Connectors: • SOURCE: DisplayPort (male) - connects to the source device

• DISPLAY: DisplayPort (male) - connects to the display device

• Molded Strain Relief

• MyTurn ready Over-Mold

Data Rate: • 18 Gbps

Signal Support: • 4K@60Hz

Color: • 48 Bits (16 bits per color)

Supported Features: • Deep Color, 3D

Plating: • 24K Gold

Included: • DP-HDMI adapter

FIG. 4 MINI DP-DP DIRECTIONAL FLAT CABLE

CBL-MDP-FL2-16 CABLE SPECIF ICATIONS

FG#: • FG10-2196-16 - 4K60 MyTurn Ready Flat Cable

Cable Length • 16.4 ft (5m)

Connectors: • SOURCE: mDP (male) - connects to the source device

• DISPLAY: DP (male) - connects to the display device

• Molded Strain Relief

• MyTurn ready Over-Mold

Data Rate: • 18 Gbps

Signal Support: • 4K@60Hz

Color: • 48 Bits (16 bits per color)

Supported Features: • Deep Color, 3D

Plating: • 24K Gold

Included: • DP-HDMI adapter

FIG. 5 DP-HDMI ADAPTER

MyTurn-Ready Over-mold

Release button

Source End

MyTurn-Ready Over-mold

Source End

Release button

HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies.

AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.

The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153

AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/

93-2 92-01 EV: A1 R

Last evised: / /2016 R 3 30

RGB with Stereo MyTurn-Ready Flat Cable

The RGB with Stereo MyTurn-Ready Flat Cable (CBL-RGB+A-FL2) is 16 ft with a flat

design that can be hidden under the carpet. A separate (included) male-male audio

patch cable introduces audio signals from a Source 3.5mm Audio Out jack to be carried

to the Display end through the same RGB cable. The Display end pigtail plugs into the

Display Audio Input 3.5mm jack.

Use the separate 3.5mm Stereo Audio Patch Cable (included) to connect to the audio

output on the Source Device.

USB 3.0 MyTurn-Ready Flat Cable

USB 3.0 MyTurn-Ready Flat Cable (CBL-USB-FL2-16) adds the new transfer mode

SuperSpeed (SS) that can transfer data at up to 5 Gbit/s (625 MB/s), which is about ten

times faster than the USB 2.0 standard. It also supports 900 mA of charging current to

power USB devices. The cable is also backwards compatibility with USB 1.0/2.0

devices.

Additional Documentation

Refer to the Products > Architectural Connectivity catalog page on www.amx.com

(Dealer Site) for additional product documentation.

CBL-RGB+A-FL2-16 CABLE SPECIF ICATIONS

FG#: • FG10-2195-16 - MyTurn Ready Flat Cable

Cable Length • 16.4 ft (5m)

Connectors: SOURCE: 15-pin HD VGA (male), with two 3.5mm female ports:

• One port connects to the source device via the separate

(included) Stereo Audio Patch Cable.

• One port is inactive - use this port to store the Stereo Audio

Patch Cable when not in use. See FIG. 6 for details.

• MyTurn ready Over-Mold

DISPLAY: 15-pin HD VGA (male), with a 3.5mm Stereo pigtail

(male) - connects to the display device:

• The pigtail is 12” (30.5cm) long.

• Molded Strain Relief with lock-down screws

Included: • 3.5mm Stereo Audio Patch Cable (18” / 45.7cm)

FIG. 6 RGB + AUDIO FLAT CABLE

3.5mm stereo audio

pigtail (12”) connects

to the display device

audio input

This end connects

to Source VGA “Out”

This end connects

to display VGA “In”

Storage Port - use when

storing the Stereo Audio

Patch Cable when not in

Audio Port - active audio

port connects to source

device audio out via included

3.5mm Stereo Audio Patch Cable

use.

CBL-USB-FL2-16 CABLE SPECIF ICATIONS

FG#: • FG10-2197-16

Cable Length • 16.4 ft (5m)

Connectors: • USB Type A on both ends

• Molded Strain Relief

• MyTurn ready Over-Mold

Data Rate: • 5 Gbps

Charge Current: • 900 mA

Plating: • 24K Gold

FIG. 7 USB 3.0 FLAT CABLE

USB Type A Display End

USB Type A Source End with MyTurn-Ready Over-mold

Produkt Specifikationer

Mærke:	AMX
Kategori:	Ikke kategoriseret
Model:	CBL-HDMI-FL2
Antal pr. pakke:	1 stk
Produktfarve:	Sort
3D:	Ja
Kabellængde:	9.75 m
Stik 1:	HDMI Type A (Standard)
Stik 2:	HDMI Type A (Standard)
Stik 1 køn:	Hanstik
Stik 2 køn:	Hanstik
Dataoverførselshastighed:	18 Gbit/sek.
Stik 1 formfaktor:	Lige
Stik 2 formfaktor:	Lige