AMX HydraPort HPX-P250 Manual

AMX Ikke kategoriseret HydraPort HPX-P250

Læs gratis den danske manual til AMX HydraPort HPX-P250 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om AMX HydraPort HPX-P250, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
QUICK START GUIDE
HPX-P200/P250-PC-xx HydraPort
®
Power Outlet Modules
Overview
HPX-P200/P250-PC-xx HydraPort AC Power Modules are used exclusively in the AMX
HydraPort (HPX-600/900/1200) and HydraPort Touch (HPX-MSP-7/10) chassis which
are designed to be mounted in a horizontal surface such as a conference room table or
lectern. Refer to the installation guide for the HydraPort 600/900/1200 and HydraPort
Touch (HPX-MSP-7/10) units for further instructions.
There are seven models available to accommodate various regional power outlet types
(FIG. 1):
FIG. 1 HPX-P200/250-PC XX POWER MODULES
HPX-P250-PC-UK (FG561-11)
Power Outlet (UK) Module
HPX-P200-PC-EU (FG561-21)
Power Outlet (EU) Module
HPX-P200-PC-AU (FG561-31)
Power Outlet (Australia) Module
HPX-P250-PC-IN (FG561-41)
Power Outlet (India, South Africa) Module
HPX-P200-PC-BR (FG561-71)
Power Outlet (Brazil) Module
HPX-P200-PC-EU2 (FG561-61)
Power Outlet (France, Belgium) Module
HPX-P200-PC-ITY (FG561-81)
Power Outlet (Italy, Chile) Module
HPX-P250-PC-UK
Provides power connectivity to the HydraPort chassis for Type G plug types used in the UK.
Dimensions (HWD): 62.5mm x 66mm x 75mm (2.5" x 2.6" x 2.95")
Module Spaces 2.5 HydraPort Units
Weight: 0.5 Kg (1 lbs)
Enclosure Black Polycarbonate UL94v0 material
Rear Connections IEC C320 C13 Socket
HPX-P200-PC-EU
Provides power connectivity to the HydraPort chassis for Type F plug types used in the EU.
Dimensions (HWD): 50mm x 66mm x 85mm (2.0" x 2.6" x 3.3")
Module Spaces 2 HydraPort Units
Weight: 0.5 Kg (1 lbs)
Enclosure Black Polycarbonate UL94v0 material
Rear Connections IEC C320 C13 Socket
HPX-P250-PC-AU
Provides power connectivity to the HydraPort chassis for Type I plug types used in Australia.
Dimensions (HWD): 50mm x 66mm x 70mm (2.0" x 2.6" x 2.8")
Module Spaces 2 HydraPort Units
Weight: 0.5 Kg (1 lbs)
Enclosure Black Polycarbonate UL94v0 material
Rear Connections IEC C320 C13 Socket
HPX-P250-PC-IN
Provides power connectivity to the HydraPort chassis for type M plug types used in India
and South Africa.
Dimensions (HWD): 62.5mm x 66mm x 76mm (2.5" x 2.6" x 3.0")
Module Spaces 2.5 HydraPort Units
Weight: 0.5 Kg (1 lbs)
Enclosure Black Polycarbonate UL94v0 material
Rear Connections IEC C320 C13 Socket
HPX-P200-PC-EU2
Provides power connectivity to the HydraPort chassis for Type E plug types used in
France and Belgium.
Dimensions (HWD): 50mm x 66mm x 85mm (2.0" x 2.6" x 3.3")
Module Spaces 2 HydraPort Units
Weight: 0.5 Kg (1 lbs)
Enclosure Black Polycarbonate UL94v0 material
Rear Connections IEC C320 C13 Socket
HPX-P200-PC-BR
Provides power connectivity to the HydraPort chassis for Type N plug types used in Brazil.
Dimensions (HWD): 50mm x 66mm x 85mm (2.0" x 2.6" x 3.3")
Module Spaces 2 HydraPort Units
Weight: 0.5 Kg (1 lbs)
Enclosure Black Polycarbonate UL94v0 material
Rear Connections IEC C320 C13 Socket
HPX-P200-PC-ITY
Provides power connectivity to the HydraPort chassis for Type L plug types used in Italy
and Chile.
Dimensions (HWD): 50mm x 66mm x 87mm (2.0" x 2.6" x 3.4")
Module Spaces 2 HydraPort Units
Weight: 0.5 Kg (1 lbs)
Enclosure Black Polycarbonate UL94v0 material
Rear Connections IEC C320 C13 Socket
© 2016 Harman. All rights reserved. HydraPort, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of
HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective
companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
93-0561-02 REV: G
Last Revised: 7/19/2016
Installation
Caution: Only a professional, AMX-qualified installer should perform this installation or
servicing. This product may not be installed or serviced by the end-user.
- Ensure that the socket/outlet meets all regulatory requirements for your region
and complies with all applicable local safety and electrical codes and standards. It
is the responsibility of the installer to ensure compliance to any applicable codes.
- AMX recommends using sleeved plugs and keeping all earthing/grounding pins
intact in order to reduce the risk of electric shock to the user.
- Use caution with plugs that do not allow earthing/grounding. Disconnect all AC
Power Cords from the AC Mains Power Branch Circuit until installation is complete.
Note: Refer to the Installation guide for instructions on installation and removal of the
HPX-600/900/1200.
Tools Required
• #2 Phillips Screwdriver
Remove the HPX-600/900/1200 (if required)
1. Remove the HPX-600/900/1200 from the mounting surface if it has previously
Install the HPX-P200/250-PC-xx Power Module
2. Remove one of the plastic end caps from the HPX-600/900/1200:
a. Remove the silver #6 screw retaining the pawl and door
b. Remove the six #6 black sheet metal screws retaining the plastic end cap to
the metal frame
c. Slip the plastic end cap off the metal frame
3. Remove existing modules or blanks to install the AC Power Module.
4. Insert the AC Power Module into the metal frame by sliding it into the slots
provided in the metal frame.
Note the orientation of the interlocking tabs. The interlocking tabs on each
module should all be facing towards the same end of the chassis (see FIG. 2 on
reverse).
5. Replace the plastic end cap by replacing the 6 #6 sheet metal screws and the #6
screw retaining the pawl and door.
Note: Do not over-tighten the pivot pawl screw (do not use a high-powered drill on
this screw).
6. Install a suitable power cord compliant with local safety standards.
a. Insert the power cord's C14 connector into the IEC C320 C13 Socket
provided on the rear of the power module.
b. Secure the power cord to the chassis using a suitable tie-wrap and one or
more of the plastic clips provided with the HPX-600/900/1200.
Replace the HPX-600/900/1200
7. Reinstall the HPX-600/900/1200 by reversing Step 1.
Note: Refer to the Installation guide for the HPX-600/900/1200 as required.
Plug the HPX-P200/250-PC-xx into the Branch Circuit
8. Connect an appropriate power cord in to the power module.
9. Plug the power outlet plug into the AC Mains Power Branch Circuit.
FIG. 2 INSTALLING THE HPX-P200/P250-PC-XX MODULE
Interlocking tab
Cables
HPX Base Assembly
Mounting Surface
End Cap

Produkt Specifikationer

Mærke: AMX
Kategori: Ikke kategoriseret
Model: HydraPort HPX-P250

Har du brug for hjælp?

Hvis du har brug for hjælp til AMX HydraPort HPX-P250 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret AMX Manualer

AMX

AMX HPA-MYT-RX Manual

5 August 2025
AMX

AMX NMX-WP-N2510 Manual

30 Juli 2025
AMX

AMX NMX-ACC-N9101 Manual

30 Juli 2025
AMX

AMX NMX-ACC-N9206 Manual

30 Juli 2025
AMX

AMX NMX-ENC-N2312 Manual

30 Juli 2025
AMX

AMX NMX-ATC-N4321 Manual

30 Juli 2025
AMX

AMX RMS-ENT Manual

30 Juli 2025
AMX

AMX RMS-ENT-SMA Manual

30 Juli 2025
AMX

AMX NMX-VRK Manual

30 Juli 2025
AMX

AMX HPA-MYT-TX Manual

16 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

B-Tech

B-Tech BT8390-SA Manual

18 August 2025
Festo

Festo ZSB-1/8-B Manual

18 August 2025
D-Link

D-Link DI-701 Manual

18 August 2025
Festo

Festo SIEF-M30B-NS-S-L Manual

18 August 2025
Festo

Festo P.BE-CMMP-SC-SW-DE Manual

18 August 2025
Festo

Festo VACC-S18-120-K4-1U-KS4ME Manual

18 August 2025
Festo

Festo SIED-M18NB-ZO-S-L Manual

18 August 2025
Festo

Festo P.BE-CP-FB11-E-IT Manual

18 August 2025
Martin

Martin Exterior Dot-4 Pro Manual

18 August 2025
Festo

Festo SOE4-FO-L-HF2-1P-M8 Manual

18 August 2025