AMX MT-1002 Manual

AMX Ikke kategoriseret MT-1002

Læs gratis den danske manual til AMX MT-1002 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om AMX MT-1002, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

AV FOR AN IT WORLD

QUICK START GUIDE

MT-1002 10” Modero G5 Tabletop Touch Panel

Overview

The MT-1002 (FG5969-47) 10” Modero G5 Tabletop Touch Panel features the

G5 Graphics Engine, Quad Core Processor, and a capacitive multi-touch

display. The touch panel features advanced technology empowering users

to operate AV equipment seamlessly, while providing the ultimate in audio

and video quality.

Sleep button

USB Port

(side view)

FIG. 1 MT-1002

Product Specifications

MT-1002 SPECIFICATIONS

Dimensions (HWD) 6 3/16” x 10 1/16” x 4 1/16” (157mm x 255mm x 103mm)

Weight 2.6 lbs (1.179 Kg)

Power

Consumption

• Full-On: 14.5 W maximum

• Standby: 5.8 W

• Shutdown: 1 W

• Start-Up Inrush Current: Not applicable due to PoE standard

External Power

Supply Required

Optimal performance requires use of one of the following AMX PoE

power supplies (not included):

• PS-POE-AT-TC, PoE Injector, 802.3AT Compliant (FG423-84)

• NXA-ENET8-POE+, Gigabit PoE Ethernet Switch (FG2178-64)

Certications • FCC Part 15 Class B

• CE EN 55032, 55035, 60950-1

• IEC 60950-1

• AS/NZS CISPR 32 Class B

• IC CISPR 22 Class B

• UL 60950-1

• VCCI CISPR 22 Class B

• RoHS

• WEEE

Environmental • Temperature (Operating): 32°F to 104°F (0°C to 40°C)

• Temperature (Storage): 4°F to 140°F (-20°C to 60°C)

• Humidity (Operating): 20% to 85% RH

• Humidity (Storage): 5% to 85% RH

• Power (“Heat”) Dissipation: On: 49.5 BTU/hr, Standby: 19.8 BTU/hr

Included

Accessories

• MXA-USB-C, USB Port Cover Kit (60-5968-29)

• Cat5e Ethernet Cable, Flat Black (ECA2265-10)

• UTP CAT.5E Snap In Coupler, Black (64-5968-01)

Connector Locations

USB peripherals (mouse, keyboard, etc.) may be connected to the USB port on

the rear of the device. Updates to the device’s rmware can also made via the

USB port.

USB Port

Speaker

RJ-45 Port

FIG. 2 MT-1002 (REAR VIEW)

Power via Power Over Ethernet

Power for the MT-1002 is supplied via Power Over Ethernet (PoE), utilizing an

AMX-certied, capacitive touch-compliant PoE injector such as the PS-POE-

AT-TC, PoE Injector, 802.3AT Compliant (FG423-84) or other approved AMX PoE

power source. The incoming Ethernet cable should be connected to the RJ45

port on the panel.

Powering On/Off Modero G5 Panels

Modero G5 touch panels may be powered on by touching and holding the

Sleep button. To power off the panel, press and hold the Sleep button, and

select Power Off on the on-screen menu (FIG. 3):

FIG. 3 SLEEP BUTTON - PRESS AND HOLD TO ACCESS POWER OFF/SETTINGS OPTIONS

Configuration and Programming

Modero G5 touch panels are equipped with a Settings menu that provides the

ability to congure various features on the panels. To access the Settings menu,

press and hold the Sleep button, and select Settings.

Note: Information on the Settings menu, panel conguration, and programming

is provided in the Modero G5 Programming Guide, available at www.amx.com.

Setting the Panel’s Device Number and Device Name

1. In the Settings menu, select NetLinx. This opens a password keypad.

2. Enter the panel password into the keypad (the default is 1988) and select

OK to access the NetLinx page.

3. Press Device Number to open the NetLinx editing window.

4. Enter a unique Device Number assignment for the panel and press OK.

5. Enter a unique Device Name assignment for the panel and press OK.

Configuring the Panel’s IP Address

The rst step is to congure the panel’s IP address. Note that this only congures

the panel to communicate with a network; it is still necessary to connect to the

NetLinx Master (see Connecting to a NetLinx Master below).

Network Communication via DHCP

1. In the Ethernet page, press DHCP/Static eld to open the DHCP/Static

window. Note that DHCP is the default setting.

2. Select Host Name, enter the new host name

3. Press OK to save changes.

Network Communication via Static Address

1. In the Ethernet page, press DHCP/Static to open the DHCP/Static window.

2. Select Static to open the Static IP window.

3. Press any eld to open a keypad or keyboard (depending on the eld), and

enter the appropriate network address information.

4. Press OK to save your changes and return to the Ethernet page.

Connecting to a NetLinx Master

To establish the type of connection to make between the panel and the

NetLinx Master:

1. In the NetLinx page, press Mode to choose the connection mode (URL,

Listen or Auto):

CONNECTION MODES

Mode Description Procedures

URL The device connects to the target

Master’s IP address via a TCP

connection.

1. Select URL in the Mode menu.

2. Enter the Master IP/URL, Master Port Number, and

Username/Password (if required by the Master).

3. Press OK to save changes.

Listen This mode allows the panel

to“listen” for the Master’s

communication signals.

Note that in this mode, the System

Number and Master IP/URL elds

are read-only.

1. Select Listen in the Mode menu.

2. Conrm the panel’s IP address is on the Master’s

URL list (via NetLinx Studio).

3. Press OK to save changes.

Note: The Host Name (set on the Ethernet page), can

be used to locate the panel on the Master (particularly

useful for DHCP connections where the IP address

can change).

Auto Use this mode when both the

panel and the NetLinx Master are

on the same Subnet.

1. Select Auto in the Mode menu.

2. Enter the System Number and Username and

Password (if applicable).

3. Press OK to save changes.

2. If password security is enabled on the target Master, enter the Username

and Password:

a. Select Username to open the NetLinx window.

b. Enter the Username and Password required by the Master.

c. Press OK to save changes and return to the NetLinx page.

Related Software and Additional Documentation

(at www.amx.com)

• Programming the Modero G5 touch panel requires the use of either Rapid

Project Maker (RPM) or the latest version of Netlinx Studio and TPDesign5,

both available to download at www.amx.com. Refer to the NetLinx Studio

and TPDesign5 online help for information.

• For information on designing touch panel pages intended to optimize the

Modero G5 experience, refer to the G5 Considerations Guide.

• For additional information on the MT-1002 panel, refer to the Modero G5

Touch Panel Instruction Manual.

• For detailed information on the Settings menu as well programming

information and instructions on upgrading rmware, refer to the Modero G5

Programming Guide.

• Detailed specications drawings for the MT-1002 are available to download

from www.amx.com.

registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks

of their respective companies. AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specications

without prior notice at any time. The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153

AMX (UK) LTD, AMX by HARMAN - Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/

LAST REVISED: 05/01/2019

Produkt Specifikationer

Mærke:	AMX
Kategori:	Ikke kategoriseret
Model:	MT-1002
Bredde:	255 mm
Dybde:	97 mm
Højde:	160 mm
Vægt:	1410 g
Produktfarve:	Sort
Skærm diagonal:	10.1 "
Skærmopløsning:	1280 x 800 pixel
Wi-Fi:	Ingen
Skærmens lysstyrke:	400 cd/m²
Synsvinkel, horisontal:	89 °
Synsvinkel, vertikal:	89 °
Indbyggede højttaler(e):	Ja
Opbevaringstemperatur (T-T):	-20 - 60 °C
Relativ luftfugtighed ved drift (H-H):	20 - 85 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 85 %
Ethernet LAN:	Ja
Strømforbrug (typisk):	5.8 W
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10, 100 Mbit/s
Intern hukommelse:	16000 MB
Kabelteknologi:	10/100Base-T(X)
RAM kapacitet:	2048 MB
Højttalereffekt:	2 W
Kontrastforhold:	700:1
Antal RJ-45-porte:	1
Berøringsskærm teknologi:	Projekteret kapacitivt systemet
Antal USB 2.0 type-A-porte:	1