Argon C1 Manual


Læs gratis den danske manual til Argon C1 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 94 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 47.5 anmeldelser. Har du et spørgsmål om Argon C1, eller vil du spørge andre brugere om produktet?

Side 1/4
02
03
04
OWNERS MANUAL
ILLUSTRATIONS
SPE IFI ATIOC C NS
4C1
S4S4
Introduction
Thank you for choosing Argon Audio loudspeakers, we hope
they ll wi bring you many years of enjoyment.
Please read this manual fully before unpacking and installing
the prod uct.
Carton con ntste
We have during production and packing carefully checked and
inspected these loudspeakers.
After unpacking ase check fple or any damage from transport.
We recommend that you keep the original cartonbox and
packing material for any future shipping.
In the cartonbox you willnd:
2 Self-adhesive Argon logos
4 S fel -adhesive rubber pads.
Loudspeaker install ionat
The spe akers are best used with the tweeters approximately
at ear level when seated. There is a bracket hole on the
back of the C1. This can be used for mounting the C1
at on a wall.
If you place t he loudspeakers on a shelf or furniture unit, the
enclosed adhesive pads may be attached under the cabinet
and will protect from unwanted resonances and from scratches.
Loudspeaker positioning
Variations in placement of your loudspeakers can produce
dramatic ffdi erences in the way music sounds. No listening
rooms are t same and the herefore we encourage you to spend
some time experimenting with which placements work best in
your listening room. Trust your ears and be willing to experiment
freely. You can start with our basic recommendations.
Please t to ensure that ry the rooms surroundings of each
louds aker left and pe right are similar in acoustic character.
For example, if one loudspeaker is placed on bare walls while
the other is placed close to soft furnitures and curtains, both
the overall sound quality and the stereo image are likely to be
compromised.
Because bookshelves are usually located close to the wall,
placement on bookshelves will often provide a richer, more
full-bodied sound. In other words; you will get more Bass.
On the other hand, if you place the speakers f stree- anding
You will get less Bass but a clearer sound.
To begin with, sthe peakers should be positioned between
1.5 m and 3 m apart at two corners of an equilateral triangle
completed by the listening area at the third corner. See fig. 1
The Argon C1 is designed to play single-standing, if the room
is not too big.
In bigger rooms a subwoofer will need to be added
in order to get optimal s d.oun
Home Th re S emseat yst
Argon C1 can be used as front channels in a surround
sound home theatre system.
Positioning the front loudspeakers within approximately 1metre
of the sides of your TV will create the best sound image in scale
with the visual image. The loudspeakers height should ideally
be be wet en the centre and top of the screen.
If Argon C1 are to be used for reproducing the surround
channels in a multi channel home theatre sys emt , we suggest
you place them as illustrated in Figures 2 to 4 depending on the
number of channels.
Connect g yourin loudspeakers
We recommend that you read the manual of your amplifier or
av-receiver carefully before connecting your loudspeakers.
Please switch off all equipment when connecting your
louds rs.peake
The bindi ng posts on t the erminal accepts wire up to Ø 4mm or
cables with bananaplugs.
Make sure that positive terminal binding posts on t she peaker
(marked + and coloured red) are connected to the positive
output terminal binding posts on t heamplifier and that the
negative terminals on the speaker (marked and coloured
black) are connected to the negative output terminal on the
amplifier. See fig 5.
You are now ready to enjoy your Argon C1 loudspeakers...!
Owner s ual man
4C1


Produkt Specifikationer

Mærke: Argon
Kategori: Højttaler
Model: C1

Har du brug for hjælp?

Hvis du har brug for hjælp til Argon C1 stil et spørgsmål nedenfor, og andre brugere vil svare dig