Asrock Z590 Extreme Manual
Læs nedenfor 📖 manual på dansk for Asrock Z590 Extreme (112 sider) i kategorien Bundkort. Denne guide var nyttig for 21 personer og blev bedømt med 4.9 stjerner i gennemsnit af 11 brugere
Side 1/112
Version 1.0
Published January 2021
Copyright©2021 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://ww w.asrock.com
ES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN
IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
LICENSE TO USE COMMENTS AND SUGGESTIONS. is Agreement does NOT
obligate Licensee to provide Intel with comments or suggestions regarding the Soware.
However, if Licensee provides Intel with comments or suggestions for the modication,
correction, improvement or enhancement of (a) the Soware or (b) Intel products or
processes that work with the Soware, Licensee grants to Intel a non-exclusive, worldwide,
perpetual, irrevocable, transferable, royalty-free license, with the right to sublicense, under
Licensee’s intellectual property rights, to incorporate or otherwise utilize those comments
and suggestions.
TERMINATION OF THIS LICENSE. Intel or the sublicensor may terminate this license
at any time if Licensee is in breach of any of its terms or conditions. Upon termination,
Licensee will immediately destroy or return to Intel all copies of the Soware.
THIRD PARTY BENEFICIARY. Intel is an intended beneciary of the End User License
Agreement and has the right to enforce all of its terms.
U.S. GOVERNMENT RESTRICTED RIGHTS. e Soware is a commercial item (as
dened in 48 C.F.R. 2.101) consisting of commercial computer soware and commercial
computer soware documentation (as those terms are used in 48 C.F.R. 12.212), consistent
with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide
the Soware to the U.S. Government. Contractor or Manufacturer is Intel Corporation,
2200 Mission College Blvd., Santa Clara, CA 95054.
EXPORT LAWS. Licensee agrees that neither Licensee nor Licensee’s subsidiaries will
export/re-export the Soware, directly or indirectly, to any country for which the U.S.
Department of Commerce or any other agency or department of the U.S. Government
or the foreign government from where it is shipping requires an export license, or other
governmental approval, without rst obtaining any such required license or approval. In
the event the Soware is exported from the U.S.A. or re-exported from a foreign destina-
tion by Licensee, Licensee will ensure that the distribution and export/re-export or import
of the Soware complies with all laws, regulations, orders, or other restrictions of the U.S.
Export Administration Regulations and the appropriate foreign government.
APPLICABLE LAWS. is Agreement and any dispute arising out of or relating to it will
be governed by the laws of the U.S.A. and Delaware, without regard to conict of laws
principles. e Parties to this Agreement exclude the application of the United Nations
Convention on Contracts for the International Sale of Goods (1980). e state and federal
courts sitting in Delaware, U.S.A. will have exclusive jurisdiction over any dispute arising
out of or relating to this Agreement. e Parties consent to personal jurisdiction and venue
in those courts. A Party that obtains a judgment against the other Party in the courts iden-
tied in this section may enforce that judgment in any court that has jurisdiction over the
Parties.
Licensee’s specic rights may vary from country to country.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 8
1.4 I/O Panel 10
1.5 Graphics Card Holder 12
Chapter 2 Installation 13
2.1 Installing the CPU 14
2.2 Installing the CPU Fan and Heatsink 17
2.3 Installing Memory Modules (DIMM) 18
2.4 Expansion Slots (PCI Express Slots) 20
2.5 Jumpers Setup 22
2.6 Onboard Headers and Connectors 23
2.7 Smart Switches 29
2.8 Post Status Checker 30
2.9 CrossFireXTM and Quad CrossFireXTM Operation Guide 31
2.9.1 Installing Two CrossFireXTM-Ready Graphics Cards 31
2.10 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT)
Installation Guide 34
2.11 M.2_SSD (NGFF) Module Installation Guide (M2_1) 36
2.12 M.2_SSD (NGFF) Module Installation Guide (M2_2) 40
4.6.3 Storage Conguration 86
4.6.4 Intel(R) Thunderbolt 87
4.6.5 Super IO Conguration 88
4.6.6 ACPI Conguration 89
4.6.7 USB Conguration 90
4.6.8 Trusted Computing 91
4.7 Tools 92
4.8 Hardware Health Event Monitoring Screen 94
4.9 Security Screen 98
4.10 Boot Screen 99
4.11 Exit Screen 102
English
4
• Direct Drive Technology
• PCB Isolate Shielding
• Impedance Sensing on Rear Out port
• Individual PCB Layers for R/L Audio Channel
• Gold Audio Jacks
• 15μ Gold Audio Connector
• Nahimic Audio
LAN 1 x 2.5 Gigabit LAN 10/100/1000/2500 Mb/s (Dragon RTL-
8125BG)
• Supports Dragon 2.5G LAN Soware
- Smart Auto Adjust Bandwidth Control
- Visual User Friendly UI
- Visual Network Usage Statistics
- Optimized Default Setting for Game, Browser, and
Streaming Modes
- User Customized Priority Control
• Supports Wake-On-LAN
• Supports Lightning/ESD Protection
• Supports Energy Ecient Ethernet 802.3az
• Supports PXE
1 x Gigabit LAN 10/100/1000 Mb/s (Intel® I219V)
• Supports Wake-On-LAN
• Supports Lightning/ESD Protection
• Supports Energy Ecient Ethernet 802.3az
• Supports PXE
Rear Panel
I/O
• 2 x Antenna Mounting Points
• 1 x PS/2 Mouse/Keyboard Port
• 1 x HDMI Port
• 1 x DisplayPort 1.4
• 1 x Optical SPDIF Out Port
• 1 x USB 3.2 Gen2 Type-A Port (10 Gb/s) (ReDriver) (Supports
ESD Protection)
• 1 x USB 3.2 Gen2 Type-C Port (10 Gb/s) (ReDriver) (Supports
ESD Protection)
• 2 x USB 3.2 Gen1 Ports (Supports ESD Protection)
* Ultra USB Power is supported on USB3_12 ports.
* ACPI wake-up function is not supported on USB3_12 ports.
English
7
Z590 Extreme
OS • Microso® Windows® 10 64-bit
Certica-
tions
• FCC, CE
• ErP/EuP ready (ErP/EuP ready power supply is required)
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may aect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.
* For detailed product information, please visit our website:
http://www.asrock.com
English
8
1.3 Motherboard Layout
BIOS
ROM
Intel
Z590
DDR4_A 2 (64 bit , 28 8- pin modu le)
DDR4_A 1 (64 bit , 28 8- pin modu le)
DDR4_B 2 (64 bit , 28 8- pin modu le)
DDR4_B 1 (64 bit , 28 8- pin modu le)
ATX 112 V
ATXPWR1
PCIE1
To p :
2.5G
LAN
To p:
Cent ral/Bas s
Cen t er:
REA R SPK
To p:
LIN E IN
Cen t er:
FRO NT
Bot t o m:
Opt ica l
SPD IF
Bot t o m:
MIC I N
H DLE D ES ET R
PLE D P WRBT N
PA NEL 1
1
SPK_ PLE D1
1
HD _AUD IO 1
USB_ 3_ 4
1
PS2
Ke yb oard
/Mou se
CMOS
Bat tery
T B1
1
CP U_ F AN 1
1
CHA_FAN4
/WP
RoHS
SA A3_1T
PCIE2
CLR MO S 1
1
US B 3.2 G en1
T: USB 3_1
B: U SB3 _2
US B 2.0
T: USB _1
B: USB_ 2
USB 3_5_6
CHA_FA N3 /WP
ADD R_LE D1
1
RG B_ LE D1
1
ADD R_LE D2
1
CHA_FA N1 /WP
1
USB3_3_4
US 3 .B 2 Ge n2
T: US B31 _T A_1
B: U SB3 1_ T C_ 1
S PI _T P M_ J1
1
DP1HDMI1
SA A3_0T
CP U_ F AN 2/ WP
RG B_ LE D2
1
PCIE3
M2 _1
M2 _3
M2 _2
CHA_FA N2
/WP
USB_ 5_ 6
1
CPU
DR AM
BO O T
VG A
USB 31_ T C_2
ATX 212 V
PCIE4
PCIE5
7
10
19
18
202126
1 54
25 24
2 3
22
6
11
12
13
27
14
15
28303132
33
34
SATA3_2
SATA3_3
SATA3_4
SATA3_5
17
16
2329
CHA_F N5/ WPA
AUDIO
CO D E C
L A N
LAN
To p :
RJ - 45
(I 219 V)
Reset
P rowe
Z590 Extre me
8
9
M2 _WI FI
English
9
Z590 Extreme
No. Description
1 12V Power Connector (ATX12V1)
2 12V Power Connector (ATX12V2)
3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
5 CPU/Water Pump Fan Connector (CPU_FAN2/WP)
6 Addressable LED Header (ADDR_LED2)
7 RGB LED Header (RGB_LED2)
8 Power Button (PWRBTN1)
9 Reset Button (RSTBTN1)
10 ATX Power Connector (ATXPWR1)
11 Front Panel Type C USB 3.2 Gen2x2 Header (USB31_TC_2)
12 USB 3.2 Gen1 Header (USB3_5_6)
13 CPU Fan Connector (CPU_FAN1)
14 SATA3 Connector (SATA3_2)(Upper), (SATA3_3)(Lower)
15 SATA3 Connector (SATA3_4)(Upper), (SATA3_5)(Lower)
16 POST Status Checker (PSC)
17 Power LED and Speaker Header (SPK_PLED1)
18 SPI TPM Header (SPI_TPM_J1)
19 Chassis/Water Pump Fan Connector (CHA_FAN3/WP)
20 SATA3 Connector (SATA3_0)
21 SATA3 Connector (SATA3_1)
22 System Panel Header (PANEL1)
23 Clear CMOS Jumper (CLRMOS1)
24 Chassis/Water Pump Fan Connector (CHA_FAN4/WP)
25 Chassis/Water Pump Fan Connector (CHA_FAN2/WP)
26 USB 2.0 Header (USB_3_4)
27 USB 2.0 Header (USB_5_6)
28 USB 3.2 Gen1 Header (USB3_3_4)
29 Chassis/Water Pump Fan Connector (CHA_FAN5/WP)
30 RGB LED Header (RGB_LED1)
31 Addressable LED Header (ADDR_LED1)
32 Front Panel Audio Header (HD_AUDIO1)
33 underbolt AIC Connector (TB1)
34 Chassis/Water Pump Fan Connector (CHA_FAN1/WP)
English
17
Z590 Extreme
2.2 Installing the CPU Fan and Heatsink
1 2
CPU_FAN
English
19
Z590 Extreme
1
2
3
English
31
Z590 Extreme
2.9 CrossFireXTM and Quad CrossFireXTM Operation Guide
is motherboard supports CrossFireXTM and Quad CrossFireXTM that allows you
to install up to three identical PCI Express p38-x16 graphics cards.
2.9.1 Installing Two CrossFireXTM-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
Interconnects on the top of the graphics
cards. (e CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
1. You should only use identical CrossFireX
TM-ready graphics cards that are AMD
certied.
2. Make sure that your graphics card driver supports AMD CrossFireX
TM technology.
Download the drivers from the AMD’s website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certied PSU. Please
refer to the AMD’s website for details.
4. If you pair a 12-pipe CrossFireX
TM Edition card with a 16-pipe card, both cards will
operate as 12-pipe cards while in CrossFireX
TM mode.
5. Dierent CrossFireX
TM cards may require dierent methods to enable CrossFi-
reX
TM . Please refer to AMD graphics card manuals for detailed installation guide.
CrossFire Bridge
English
33
Z590 Extreme
Step 1
Power on your computer and boot into OS.
Step 2
Remove the AMD drivers if you have any VGA drivers installed in your system.
Step 3
Install the required drivers and CATALYST Control Center then restart your
computer. Please check AMD’s website for details.
2.9.3 Driver Installation and Setup
Step 4
Double-click the AMD Catalyst Control
Center icon in the Windows® system tray.
Step 5
In the le pane, click and Performance
then AMD CrossFireXTM. en select
Enable AMD CrossFireX and click Apply.
Select the GPU number according to your
graphics card and click .Apply
AMD Catalyst Control Center
e Catalyst Uninstaller is an optional download. We recommend using this utility
to uninstall any previously installed Catalyst drivers prior to installation. Please
check AMD’s website for AMD driver updates.
English
38
Step 6
Tighten the screw with a screwdriver
to secure the module and M.2
heatsink into place. Please do
not overtighten the screw as this
might damage the module and M.2
heatsink.
2
2
1
English
45
Z590 Extreme
Step 3
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, nd the corresponding nut
location to be used.
Step 4
Prepare the M.2 stando that comes
with the package. en hand tighten
the stando into the desired nut
location on the motherboard. Align
and gently insert the M.2 (NGFF)
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only ts in one orientation.
Step 5
Tighten the screw that come with the
package with a screwdriver to secure
the module into place.
ABC
ABC 20o
C
1
1
2
English
48
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for
details: http://www.asrock.com
TEAM PCIe3 x4 TM8FP2240G0C101
TEAM PCIe3 x4 TM8FP2480GC110
Transcend SATA3 TS256GMTS400
Transcend SATA3 TS512GMTS600
Transcend SATA3 TS512GMTS800
V-Color SATA3 VLM100-120G-2280B-RD
V-Color SATA3 VLM100-240G-2280RGB
V-Color SATA3 VSM100-240G-2280
V-Color SATA3 VLM100-240G-2280B-RD
WD SATA3 WDS100T1B0B-00AS40
WD SATA3 WDS240G1G0B-00RC30
WD PCIe3 x4 WDS256G1X0C-00ENX0 (NVME)
WD PCIe3 x4 WDS512G1X0C-00ENX0 (NVME)
English
57
Z590 Extreme
3.3.3 BIOS & Drivers
Installing BIOS or Drivers
When the "BIOS & Drivers" tab is selected, you will see a list of recommended or
critical updates for the BIOS or drivers. Please update them all soon.
Step 1
Please check the item information before update. Click on to see more details.
Step 2
Click to select one or more items you want to update.
Step 3
Click Update to start the update process.
English
58
3.3.4 Setting
In the "Setting" page, you can change the language, select the server location, and
determine if you want to automatically run the ASRock Live Update & APP Shop
on Windows startup.
English
76
ODT Setting
ODT WR (A1)
Congure the memory on die termination resistors' WR for channel A1.
ODT WR (A2)
Congure the memory on die termination resistors' WR for channel A2.
ODT WR (B1)
Congure the memory on die termination resistors' WR for channel B1.
ODT WR (B2)
Congure the memory on die termination resistors' WR for channel B2.
ODT NOM (A1)
Use this to change ODT (CH A1) Auto/Manual settings. e default is [Auto].
ODT NOM (A2)
Use this to change ODT (CH A2) Auto/Manual settings. e default is [Auto].
ODT NOM (B1)
Use this to change ODT (CH B1) Auto/Manual settings. e default is [Auto].
ODT NOM (B2)
Use this to change ODT (CH B2) Auto/Manual settings. e default is [Auto].
ODT PARK (A1)
Congure the memory on die termination resistors' PARK for channel A1.
ODT PARK (A2)
Congure the memory on die termination resistors' PARK for channel A2.
ODT PARK (B1)
Congure the memory on die termination resistors' PARK for channel B1.
ODT PARK (B2)
Congure the memory on die termination resistors' PARK for channel B2.
Advanced Setting
ASRock Timing Optimization
Congure the fast path through the MRC.
English
85
Z590 Extreme
Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.
Front Panel
Enable/disable front panel HD audio.
Onboard HDMI HD Audio
Enable audio for the onboard digital outputs.
Onboard WAN Device
Use this item to enable or disable the onboard WAN device.
WAN Radio
Enable/disable the WiFi module's connectivity.
Bluetooth
Enable/disable the Bluetooth connectivity.
Deep Sleep
Congure deep sleep mode for power saving when the computer is shut down.
Restore on AC/Power Loss
Select the power state aer a power failure. If [Power O] is selected, the power will
remain o when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.
Turn On Onboard LED in S5
Turn on Onboard LED in the ACPI S5 state.
Restore Onboard LED Default
Restore Onboard LED default value.
RGB LED
is option enables/disables the RGB LED.
Onboard Button LED
Enable/disable the onboard button LED.
English
89
Z590 Extreme
4.6.6 ACPI Conguration
Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.
PS/2 Keyboard S4/S5 Wakeup Support
Allow the system to be waked up by a PS/2 Keyboard in S4/S5.
PCIE Devices Power On
Allow the system to be waked up by a PCIE device and enable wake on LAN.
I219 LAN Power On
Allow the system to be waked up by the Onboard Intel LAN.
RTC Alarm Power On
Allow the system to be waked up by the real time clock alarm. Set it to By OS to let
it be handled by your operating system.
USB Keyboard/Remote Power On
Allow the system to be waked up by an USB keyboard or remote controller.
USB Mouse Power On
Allow the system to be waked up by an USB mouse.
Produkt Specifikationer
| Mærke: | Asrock |
| Kategori: | Bundkort |
| Model: | Z590 Extreme |
Har du brug for hjælp?
Hvis du har brug for hjælp til Asrock Z590 Extreme stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bundkort Asrock Manualer
31 Maj 2025
13 Januar 2025
13 Januar 2025
27 December 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
10 Oktober 2024
Bundkort Manualer
- Bundkort Foxconn
- Bundkort Intel
- Bundkort MSI
- Bundkort EPoX
- Bundkort AOpen
- Bundkort Biostar
- Bundkort Sapphire
- Bundkort Raspberry Pi
- Bundkort Advantech
- Bundkort Elitegroup
- Bundkort Sharkoon
- Bundkort Supermicro
- Bundkort Evga
- Bundkort Asus
- Bundkort NZXT
Nyeste Bundkort Manualer
9 Juni 2025
4 Juni 2025
4 Juni 2025
3 Juni 2025
29 Marts 2025
27 Marts 2025
6 Marts 2025
15 Februar 2025
15 Februar 2025
15 Februar 2025