ATen VM7824 Manual

ATen Ikke kategoriseret VM7824

Læs gratis den danske manual til ATen VM7824 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om ATen VM7824, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

VM7824 / VM8824

4-Port True 4K HDMI Input Board / Output Board Quick Start Guide

Hardware Review

VM7824 Panel View

1. Link LEDs

2. ATEN LockPro™ Screws

3. Status LED

4. HDMI Input Ports

5. Audio Input Ports

VM8824 Panel View

1. Link LEDs

2. ATEN LockPro™ Screws

3. Status LED

4. HDMI Output Ports

5. Audio Output Ports

Hardware Setup

I/O Board Installation

Follow the steps below to safely install the VM7824 / VM8824 to a supporting

Modular Matrix Switch. For a list of the supported Modular Matrix Switch, visit

the VM7824/VM8824 product web pages.

Note: The VM3250 is used as an example in the instructions below.

1. Power off the Modular Matrix Switch.

Note: The VM7824/VM8824 cards are hot-swappable.

2. On the rear of the Modular Matrix Switch, unscrew the Phillips head screws

for one input slot (right) and one output slot (left), and then remove back

panel covers.

3. Slide the VM7824 into the input board slot, and the VM8824 into the output

slot. Make sure they secure in place.

4. Tighten the screws to secure the input and output boards to the

Modular Matrix Switch.

5. To install more I/O boards, repeat steps 2 to 4.

6. Proceed to the next section to install sources and displays.

VM7824 Front View VM8824 Front View

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

1 2

4 5

Output Slots Input Slots

Package Contents

1 VM7824 4-Port True 4K HDMI Input Board or VM8824 4-Port True 4K HDMI Output Board

4 Terminal Blocks

1 User Instructions

VM7824 VM8824

Support and Documentation

Notice

All information, documentation,

ﬁ rmware, software utilities, and

speciﬁ cations contained in this

package are subject to change

without prior notiﬁ cation by

the manufacturer.

To reduce the environmental

impact of our products, ATEN

documentation and software can

be found online at

http://www.aten.com/

download/

Technical Support

www.aten.com/support

® International Co., Ltd.

are the property of their respective owners.

This product is RoHS compliant.

Source and Display Device Installation

1. Connect one or more AV source devices to the HDMI and Audio Input ports of the VM7824.

2. Connect one or more display devices to the HDMI Output ports of the VM8824.

3. Connect one or more speakers or audio output devices to the Audio Output ports of the VM8824.

4. Make sure to ground the Modular Matrix Switch and all the devices in the installation.

5. Power on the Modular Matrix Switch and all the devices in the installation.

이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시

기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.

Scan for

more information

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modiﬁ cations not expressly approved by the party responsible for compliance could void

the user's authority to operate this equipment.

Warning: Operation of this equipment in a residential environment could cause radio interference.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Produkt Specifikationer

Mærke:	ATen
Kategori:	Ikke kategoriseret
Model:	VM7824

Har du brug for hjælp?

Hvis du har brug for hjælp til ATen VM7824 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret ATen Manualer

ATen CS1144D4C Manual

26 Februar 2025

26 Februar 2025

26 Februar 2025

26 Februar 2025

26 Februar 2025

26 Februar 2025

25 Februar 2025

25 Februar 2025

25 Februar 2025

25 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea STRANDMOLKE 904.572.12 Manual

1 Juli 2025

Mercyu MRU-52G Manual

1 Juli 2025

SHX CSTAR01 Manual

1 Juli 2025

OmniMount OmniBasics OB60FM Manual

1 Juli 2025

Daikin EKRUCBSA Manual

1 Juli 2025

Daikin REYA12A7Y1B Manual

1 Juli 2025

SilverCrest SRGS 1400 E1 Manual

1 Juli 2025

Braun MultiMix 2 HM 2110 Manual

1 Juli 2025

SilverCrest SCP 10000A1 Manual

1 Juli 2025

Ikea VESTERÖY 105.119.01 Manual

1 Juli 2025