Ballymore SNR4-3660 Manual

Ballymore Stige SNR4-3660

Læs gratis den danske manual til Ballymore SNR4-3660 (2 sider) i kategorien Stige. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Ballymore SNR4-3660, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

CONSIDER BEFORE EACH USE

1. Choose the correct ladder or work platform for the speci c task.

If unsure, consult the factory.

2. Metal ladder stands and work platforms conduct electricity. Keep away from

energized electrical circuits. Contact could cause electrocution.

3. Use in accordance with instructions and warnings provided.

4. Common sense and good judgment must be used at all times.

Do not use

• If in poor health

• If subject to fainting.

• If using drugs (including prescribed medication which could affect equilibrium)

or alcohol.

5. Wear appropriate footwear. High heel shoes and shoes with slippery soles

are dangerous.

INSPECT BEFORE EACH USE

1. Inspect thoroughly for missing, damaged or worn components.

2. Inspect for loose fasteners.

3. See that all caster assemblies including lock steps operate freely

(see “MAINTENANCE”).

Remove damaged or malfunctioning (units which do not roll and lock properly or

do not sit square and level) ladders and work platforms from service. Do not make

temporary repairs.

PROPER USE OF MOBILE LADDER STANDS AND MOBILE

WORK PLATFORMS

GENERAL SAFETY

1. Users are cautioned to take proper safety measures when a ladder or work platform

is used in areas where electrical lines exist. Prevent any contact or possible contact

with an energized uninsulated circuit or conductor in order to avoid electric shock,

short circuit and serious injury.

2. Do not use on uneven or sloping surfaces.

3. Do not overload - observed posted capacity.

4. Do not move/roll an occupied ladder or platform. On lockstep ladder, make

sure ladder is in the climbing position (front legs secured rmly to the oor

before climbing).

5. Shifting weight on a ladder equipped with spring-loaded casters alters spring

compression, causing light “ oat” feeling. User should be aware of this characteristic

in order to expect and compensate for it.

6. Handrails (if equipped) should be used when climbing or descending the ladder.

7. On 59º slope ladder, always face the ladder when climbing or descending. Step

slope is too steep to face outward. 50º slope ladders allow forward facing descent.

8. Keep body centered on ladder or work platform. Avoid shifting weight suddenly

and do not push, pull, lean over, etc. in any way that may cause ladder legs or casters

to lift off oor.

9. Do not over-reach. Keep unit close to the work. If necessary, descend and relocate

the unit to prevent overreaching.

10. Do not place any object on the top step or platform in order to gain additional

height.

11. Do not climb on rails.

12. Do not store materials or equipment on steps.

13. Do not enter or exit any step of the unit to/from another elevated surface unless

the unit has been positively secured against movement.

14. Do not place an occupied ladder or work platform in front of a door unless the

door is secured in an open position, locked, or attended.

15. Mobile ladder stands are designed for use by one (1) person only.

MAINTENANCE

Periodic* inspection and maintenance should include the following:

1. Inspect ladder periodically for wear, damage and corrosion e.g., rust, worn or

broken treads, broken welds, bent parts and frame members, etc.

2. Ch g - un shoul str t and square and ho d s l on the eck ali nment it d be aigh s ul it leve oor.

3. Ladders equipped with spring-loaded casters:

• Remove and inspect all casters and springs.

• Look for excessive or uneven wear on caster stems.

• Be sure wheel is round and rotates freely in fork.

• Check caster sleeve on ladder base making sure

sleeve is straight.

• Check inside of caster sleeve and remove any foreign material.

• Hole in top of caster sleeve should be round. If not,

caster assembly may not operate properly.

• Clean caster stems and springs. Apply a thin coat of oil.

• Replace caster assembly checking to assure smooth operation.

NOTE: Replace any broken, worn or missing casters or springs. In order to provide

the proper replacement parts, advise factory of model number; or if unknown, the

number of steps, width of steps and if ladder has handrails or not. Ladder may not

function properly and may even be dangerous if wrong casters and/or springs are

installed.

Produkt Specifikationer

Mærke:	Ballymore
Kategori:	Stige
Model:	SNR4-3660

Har du brug for hjælp?

Hvis du har brug for hjælp til Ballymore SNR4-3660 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stige Ballymore Manualer

Ballymore SS724 Manual

21 August 2024

Ballymore A7SH30-TR Manual

20 August 2024

Ballymore WLFS0111-Y Manual

20 August 2024

Ballymore H226TR Manual

19 August 2024

Ballymore SEP4-2448 Manual

18 August 2024

Ballymore M-2000 082414 Manual

18 August 2024

Ballymore PIP-11 Manual

17 August 2024

Ballymore CL-8-42 Manual

17 August 2024

Ballymore WLFS0109-Y Manual

17 August 2024

Ballymore WLFS0219-Y Manual

17 August 2024

Stige Manualer

Nyeste Stige Manualer

SAVS ESC-7S Manual

1 November 2025

SAVS ESC-4S Manual

31 Oktober 2025

Blue Wave NE1175 Manual

31 Oktober 2025

Vestil COLA-7-68-20 Manual

8 Oktober 2025

Vestil DKL-7 Manual

3 Oktober 2025

Vestil COLA-2-56-56 Manual

3 Oktober 2025

Vestil NTAL-12-HDG Manual

2 Oktober 2025

Vestil LAD-MM-2-G-YL Manual

2 Oktober 2025

Vestil LAD-MM-5-G-YL Manual

2 Oktober 2025

Vestil DKL-9 Manual

2 Oktober 2025