Barska AX11902 Manual

Barska Vault AX11902

Læs gratis den danske manual til Barska AX11902 (2 sider) i kategorien Vault. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Barska AX11902, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

OPENING THE SAFE WITH ACCESS KEY

1. Remove the small cover by gently pulling on it, to expose the

access key slot

2. Insert the access key and turn key to the left to unlock

3. Turn handle to the right to open safe door

4. Turn access key to the right to lock, remove key and replace

small plug

NOTE

Store access keys in a secure place. NOT inside of safe

BATTERIES

1. Remove battery cover on the inside of the safe door

2. Insert 4 AA batteries into the battery compartment and pay

attention to the polarity of the batteries

3. Replace compartment cover

REPLACING BATTERIES

If LCD displays LO BAT, this indicates that the batteries are low.

1. Open safe by using the access key

2. Repeat steps 1-3 of “Batteries” above and replace old batteries

with new batteries

3. Close safe and ensure that the safe is locked

NOTE

After reinserting batteries safe retains last personal pin codes

saved

CREATING PERSONAL PIN CODES

For security purposes, change the factory default codes as soon as

possible and before placing valuables in the safe.

NOTE

1st default pin code is 1234

2nd default pin code is 123456

NOTE

Safe retains only two 3-8 digit pin codes

1st Personal Pin Code

1. Open safe either by default pin codes or access key

Note: A beep will sound for each key pressed

2. Input the factory preset pin code #1234# then press * button

rapidly, on the LCD screen one dash will be blinking

3. Input your personal pin code, press # to confirm the LCD

screen will show -----, input digit pin code again, press # to

confirm

4.“Into” appears in the LCD screen which indicates that your pin

code is saved

2nd Personal Pin Code

For security purposes you must change the 2nd pin code set

1. Press #123456# then press * button rapidly, on the LCD screen

one dash will be blinking

2. Follow steps 3 and 4 of “1st Personal Pin Code”

NOTE

Be sure to write down these codes immediately and store in a

safe place

TESTING THE PERSONAL PIN CODES

1. With safe door open, and the handle in the locked position.

Press # and enter in 1st set of the personal pin code on the key

pad and press # again

Successful Save

- You will hear 3 short beeps

- The LCD screen will show OPEN

- Move handle to the right to retract bolts

Unsuccessful Save

- You will hear a consistent beeping

- The LCD screen will show ERROR

- Handle will not move

- Repeat steps Creating Personal Pin Codes, of 1st Personal

Pin Code

2. To test 2nd personal pin code. Press # and enter in 2nd set of

the personal pin code on the key pad and press # again. See

“ Successful Save” and “ Unsuccessful Save” above

3. Close safe and ensure that the safe is locked

OPENING SAFE WITH PERSONAL PIN CODES

1. Press # then input either of the personal pin codes then press #.

2. Turn the handle to the right and pull the safe door open

NOTE

After entering pin, you have 5 seconds to turn the knob before the

mechanism re-locks automatically

3. To close safe, close door and turn knob to the left to lock

See reverse side for more information

9/12

BC246

Parts of the Control Panel

C. LCD Screen

D. Key Pad

A. Handle

B. Override Key and Cover

Parts of the Inside of the Safe Door

E. Initialization Button F. Battery Compartment

WARNING: Avoid leaving door open and unattended; it will allow

unauthorized individuals to reprogram the safe, gaining full access

to the safe and contents.

PARTS OF THE SAFE

User Manual For

Fireproof Digital Keypad Safe

BARSKA warrants this new safe to be free of original defects in

material and/or workmanship under normal use for a period of

twelve (12) months from the date product is received by

purchaser. This warranty does not include damage caused by

improper installation or maintenance. Damage from misuse,

abuse, accident (such as dropping), normal wear and tear,

excessive fire, flood, or acts of nature. Damage from service or

repairs other than those performed by BARSKA. Labor, cost

and shipping charges for the removal and replacement of

defective parts beyond the initial twelve-month warranty period.

All transportation and shipping charges. Removing or altering

the seal under any circumstances will automatically void the

warranty.

This warranty is limited to original purchaser and is not

transferable. This warranty applies only to products purchased

in the United States.

Please email info@barska.com or call 1.888.666.6769 for

Return Merchandise Number (RMA#) before any returns. The

RMA number must appear on the outside of the shipping

package. Product must be packed carefully and sturdily in its

original packaging to prevent damage in transit and returned

freight pre-paid to:

BARSKA OPTICS

Repair Department

1721 Wright Avenue

La Verne, CA 91750

Please include all of the following when returning BARSKA

products for service and/or replacement:

1. Please write your complete details (Name, Address,

Telephone #, E-mail address, RMA#, etc.)

2. Purchase receipt or Proof of Purchase. (Original/Copy)

3. A brief explanation of the defect.

4. A Check/Money Order of $50.00 to cover inspection,

shipping and handling.

*Please allow 6-8 weeks for delivery.

BARSKA will examine and test returned product and repair or

replace defective part(s) or units with new part(s) or a new unit

if necessary within the warranty period. Purchaser is required

to remit $50.00 to BARSKA for return shipping and handling at

time product is returned. If repair is required after warranty

period expiration, purchaser will be charged for replacement

parts and return shipping.

BARSKA® Optics shall not be liable for any consequential,

incidental and/or contingent damages whatsoever. We will not

pay shipping, insurance or transportation charges from you to

us, or any import fees, duties and or taxes. This warranty

supersedes all previous BARSKA® Optics warranties.

SAFES

1 YEAR LIMITED WARRANTY

2/12BC177

1721 Wright Ave | La Verne, CA 91750 | USA

(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com

CHANGING PERSONAL PIN CODES

1. Open safe by entering either of the personal pin codes or by

using the access key

2. Press and hold down the initialization button on the inside of

the safe door, release initialization button

4. On the LCD screen it will show CLEAR, indicating that the pin

codes have been deleted.

5. The safe is now in default mode. Default pin codes are 1234

and 123456

6. See “Initial Numeric Pin Codes” to change default pin codes

CARE AND MAINTENANCE

- For security purposes, change the factory default codes as

soon as possible

- If necessary use a damp cloth to clean the safe. DO NOT use

chemicals or cleaning agents

- Keep liquids away from the control panel. Spills on the control

panel will cause damage and possibly electric shock

- Secure safe in a proper area to prevent it from falling and

causing damage or injury

- DO NOT over stuff the contents of the safe, it can damage the

motor mechanism or the contents

- DO NOT disassemble the product. For all repairs and

maintenance, contact authorized service centers or distributor

BARSKA Customer Service

- DO NOT place emergency keys inside of safe

- The Safe can withstand heat up to 1700ºF but the interior will

reach up to 350ºF for 1 hour, avoid storing items that will get

damaged at that temperature

- NOT intended for digital media, such as backup tapes, data

cartridges, CD's etc

- Do not store delicate items; Safe accumulates moisture because

of fire resistance technology, which might cause damage to

delicate items such as jewelry, photos, and other moisture

sensitive items

Replacement Keys: When calling for replacement or additional

access keys have the access key code number ready. The access

key code is etched on the access keys and on this manual.

User Manual For

Fireproof Digital Keypad Safe

Produkt Specifikationer

Mærke:	Barska
Kategori:	Vault
Model:	AX11902

Har du brug for hjælp?

Hvis du har brug for hjælp til Barska AX11902 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vault Barska Manualer

Barska AX11820 Manual

25 August 2024

Barska AX13368 Manual

25 August 2024

Barska CB11794 Manual

25 August 2024

Barska AX11646 Manual

25 August 2024

Barska AX11970 Manual

25 August 2024

Barska AX11650 Manual

25 August 2024

Barska CB11784 Manual

25 August 2024

Barska AX11780 Manual

25 August 2024

Barska AX11838 Manual

25 August 2024

Barska AX12842 Manual

25 August 2024

Vault Manualer

Nyeste Vault Manualer

Phoenix SS0721EP Manual

11 Januar 2025

Phoenix Fire Fighter II FS0442E Manual

11 Januar 2025

Olympia GOsafe H20 Manual

11 Januar 2025

SereneLife SLSV45EQG Manual

11 Januar 2025

Kogan KADSAFM16LA Manual

8 Januar 2025

MSW -FPS-02 Manual

31 December 2025

Sistec TSF 1909 Manual

30 December 2025

Burg Wächter Point-Safe P 1 E Manual

30 December 2025

Honeywell 5005P Manual

29 December 2024

Homak Security HS30103605 Manual

27 December 2024