Bauknecht TRA Star edition Manual

Bauknecht Tørretumbler TRA Star edition

Læs gratis den danske manual til Bauknecht TRA Star edition (2 sider) i kategorien Tørretumbler. Denne vejledning er vurderet som hjælpsom af 66 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 33.5 anmeldelser. Har du et spørgsmål om Bauknecht TRA Star edition, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

5019 407 00617

Very

Wet

Load

Wet

Load

Fabric

Drying

Cycles

& Drying

levels

Drying options Buzzer & Anti-Crease

cannot be selected together

Gentle

Reduces drying

intensity

(recommended

for delicate

items)

Dryness

Adjustment

Adjusts Dryness

Level according

to wishes

Buzzer

Signals/Sounds

end of drying

cycle at

Intervals

Anti-Crease

Prevents

laundry from

creasing

Start Delay

Delays the

drying cycle

start

Indicative

drying

times (in

minutes)

85’

140’

70’

120’

3.0

6.0 Cotton

max 6 kg

Cupboard extra dry

70’

110’

50’

95’

3.0

6.0 Cupboard dry *

50’

95’

45’

75’

3.0

6.0 Iron dry *

20’

35’

15’

30’

1.0

2.5 Synthetics

max 2.5 kg

Cupboard dry *

15’

30'

10’

25’

1.0

2.5 Iron dry

60’ 45’ 2,5

Extra Care

max 2.5 kg

Low drying intensity for

delicates and garments

labelled .- -

- - - Airing Laundry is aired and

refreshed for 30 minutes

without heating. - -

- - -

Time

Completes drying or dries

single items (suitable for

all fabrics). - -

TRA StarEdition

QUICK REFERENCE GUIDE

Please also carefully read the

“Instructions for Use”.

CottonSynthetics

Extra

Care

AiringTime

* Test programmes according IEC 61121

Start

Pause

Starts the drying cycle. The “Start”

indicator lamp is blinking during

the selection phase.

Press to confirm the final selection.

Programme

selection Turn the programme selector knob to

the desired programme. The indicator

next to the programme name lights up.

The start indicator blinks to show, that

the dryer is in selection mode. After

the Start / Pause button is pressed the

start indicator lamp lights up and the

programme starts.

Start delay

Delays the drying cycle start from

1 up to 12 hours.

To select the start delay turn the

programme selector knob to the

desired programme, select the desired

options and press the start delay

button. With each touch of the start

delay button, drying cycle start is

delayed by one hour. Press the “Start”

button to confirm your final selection.

Start delay indicator blinks and the

count-down is running by reducing the

time in one hour steps. The count-

down is indicated by the blinking of

the start-delay indicator located above

the button. During count-down the

drum will turn from time to time to

redistribute the laundry and the pump

may be heard working for a short time.

To cancel or to change the previously

set time turn programme selector knob

to “0” or open the door.

Remaining time

indication After cycle start a default drying time is

indicated depending on the selected

drying programme and the dryness

adjustment. After 15 seconds the time

will be adjusted to the real expected

remaining time, depending on size,

type and humidity of the load.

Dryness

Adjustment

Dryness adjustment is an option to

adjust the dryness of the laundry

according to your wishes. Select the

desired programme and the option

dryness level adjustment by pressing

the button “+“ for more dry or the

button “–“ for more humid. The

selected dryness will be stored as a pre-

setting to the selected drying

programme. Using the drying

programme next time the pre-setting

appears. By pressing the dryness

adjustment buttons “+” or “–” the pre-

setting can be changed.

Filter The indicator lamp lights up when the

filter needs cleaning. Clean the filter

at the end of every cycle.

PROGRAMME SEQUENCE INDICATION

The programme sequence is indicated by lamps,

switching on when programme step starts and

switching off when the programme step is passed.

5019 407 00617

1. Check that all fastenings are closed and

that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to make

sure it doesn’t become tangled.

Sort laundry as follows:

A) By care symbols

(on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced

drying intensity only. Press gentle

button or select specific programme

Do not tumble dry

B) By amount and thickness/weight

Whenever the load to be dried exceeds

dryer capacity, separate laundry

according to weight (e.g. towels from

thin underwear).

C) By type of fabrics

Cotton/linen: towels, cotton jersey, bed

and table linen made of cotton or linen.

Synthetics/Easy Care: blouses, shirts,

overalls, etc. made of polyester or

polyamide, as well as cotton/synthetic

mixes.

D) By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry: woollens, silk, nylon

stockings, delicate embroidery, fabrics with

metallic decorations, bulky items such as

sleeping bags, etc.

Important: only use specific indicated

dryer-safe additives and rinse items that

have been treated with stain remover

thoroughly in plenty of water before drying.

Only use specific indicated dryer-safe

plastic items and never dry rubber or

articles contaminated with vegetable oil in

the dryer

(Option only available when

Programme is selected).

Push the button to turn the drum light on for

30 sec. and push again to turn the drum light

off..

Programme and Options:

• To select a programme, turn the

programme selector knob. The “Start”

indicator lamp is blinking, indicating that

the cycle needs to be started.

• To select an option, press the

corresponding button. The indicator

lamp above the button confirms that a

selection has been made.

• Press the button again to cancel the option.

1. Having selected the desired programme and

options, press the “Start” button.

If the laundry is not removed at the end of

the drying cycle, an automatic anti-crease

cycle will operate for maximum 60 min.

The drum rotates at regular intervals,

preventing the laundry from creasing.

Anti-Crease protection re-distributes

laundry in the drum.

When the Anti-Crease option is selected

and laundry has not been taken out, an

anti-crease cycle is activated for 12 hrs.

2. On completion of the programme, set the

programme selector knob to position “0”.

When changing the programme during the

drying cycle, the dryer stops. The “Start”

indicator lamp is blinking.

To operate the new programme, press the

“Start” button again.

To interrupt the dryer during operation

1. Set the programme selector knob to

Airing.

2. Press the “Start” button.

Wait at least 5 minutes before opening the

door to allow the dryer to cool down.

For your safety the programme stops

automatically if you open the door.

3. To restart, after door opening, close the

door and press the

“Start” button again.

Clean the lint filter at the end of every

drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Remove lint using a soft brush or your

fingertips.

4. Push the filter back into place.

If a fault occurs, before contacting our After-

Sales Service, make the following checks to

try and remedy the problem:

Drying takes too long / laundry is not

dry enough:

• Was the correct programme selected?

• Was the inserted laundry too wet

(Washing machine spin speed less than

800 rpm)?

• Is the lint filter dirty (filter indicator lamp

on)?

The dryer does not operate:

(after a power failure and/or

interruption to the mains supply,

always press the Start button).

• Is the plug properly inserted into the

mains electricity socket?

• Is there a power failure?

• Has the fuse blown?

• Is the door well closed?

• Has the programme been selected?

• Has the start-delay option been selected?

• Are the END and Anti-crease indicator lamps

lighting up? The drying cycle is complete

and the laundry can be taken out.

• Has the “Start” button been pressed?

Lint filter indicator lamp on:

• Is the lint filter clean?

• Is the vent hose blocked?

All programme sequence indicators

blinking:

• Service call necessary.

Replacing the drum light bulb (if supplied):

• If the inside lamp does not work, the bulb

may be faulty.

• Unplug the dryer.

• Open the door and unscrew the glass

cover insie the drum.

• Replace the faulty bulb with a new one

and screw the glass cover back on.

• Replacement bulb: Philips 15W, 230/

240V, E14.

If, after carrying out the above checks the

malfunction persists or appears again, turn

the dryer off and call our After-Sales Service

(refer to guarantee).

Please specify:

• The nature of the fault.

• The dryer type and model.

• The service code (the number after the

word Service on the adhesive rating

plate) on the right-hand side when the

door is open.

• Your full address and phone number.

PREPARING THE LAUNDRY

DRUM LIGHT OPTION

SELECTING A PROGRAMME & OPTIONS

STARTING & COMPLETING A

PROGRAMME

CHANGING A PROGRAMME

INTERRUPTING A PROGRAMME

DAILY MAINTENANCE & CLEANING

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

Produkt Specifikationer

Mærke:	Bauknecht
Kategori:	Tørretumbler
Model:	TRA Star edition

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauknecht TRA Star edition stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tørretumbler Bauknecht Manualer

Bauknecht trkk 7846 Manual

15 Januar 2025

Bauknecht TRKA Koblenz 4590 Manual

15 Januar 2025

Bauknecht trkk 6840 Manual

15 Januar 2025

Bauknecht trk advance Manual

14 Januar 2025

Bauknecht TRAD 6267 Manual

4 December 2024

Bauknecht TRAD 6247 Manual

4 December 2024

Bauknecht T Soft M11 82 N Manual

4 December 2024

Bauknecht TRKK STUTTGART/2 Manual

8 Oktober 2024

Bauknecht TRK 4970 Manual

16 September 2024

Bauknecht Excellence 9R GSF Manual

16 September 2024

Tørretumbler Manualer

Nyeste Tørretumbler Manualer

Blomberg LTK38030 Manual

19 Juni 2025

BEKO DHP10W Manual

19 Juni 2025

BEKO DC9W Manual

19 Juni 2025

Infiniton SD-BC8EWN Manual

19 Juni 2025

Infiniton SD-BC8EDX Manual

19 Juni 2025

Electrolux EW6D4183P1 Manual

19 Juni 2025

Haier HD90-C367GU1 Manual

18 Juni 2025

Sogo SS-3665-P Manual

18 Juni 2025

Blomberg LTA18320 Manual

18 Juni 2025

Haier HD90-CQ387U1 Manual

18 Juni 2025