Bauknecht TRAD 6240 Manual

Bauknecht Tørretumbler TRAD 6240

Læs gratis den danske manual til Bauknecht TRAD 6240 (2 sider) i kategorien Tørretumbler. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Bauknecht TRAD 6240, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

5019 407 00232

Very

Wet

Load

Wet

Load

Fabric

programmes

& Drying levels

Drying options

Gentle

Reduces drying

intensity

(recommended for

delicate items)

Anti-Crease

Prevents laundry

from creasing

up to 12 hours.

Buzzer is

switched off

Indicative drying

times (in minutes)

80’

110’

60’

90’

3.0

5.0 Cotton

Max 5 kg

Cupboard dry +

65’

90’

50’

75’

3.0

5.0 Cupboard dry *

55’

75’

40’

65’

3.0

5.0 Iron dry *

30’

40’

20’

35’

1.0

2.5 Synthetics

Max 2.5 kg

Cupboard dry +

20’

35’

15’

30’

1.0

2.5 Cupboard dry *

15’

30’

10’

25’

1.0

2.5 Iron dry

- - - Airing Laundry is aired and refreshed for

30 minutes without heating. -

- - -

Time

Completes drying or dries single

items (suitable for all fabrics). -

QUICK REFERENCE

GUIDE

Please also carefully read the

“Instructions for Use”.

Beschermen

Kreuk

beveiliging

CottonSyntheticsAiringTime

Start

Pause Starts the drying cycle.

The indicator lamp is

blinking during the selection

phase. Press to confirm the

final selection.

Filter The indicator lamp lights up when

the filter needs cleaning. Clean

the filter at the end of every

cycle.

Overdry

protection

The indicator lamp lights up when

a humidity controlled program is

selected, to indicate the working

protection function.

Function is not active in time

controlled programs and Airing.

PROGRAMME SEQUENCE INDICATORS

Overdry

Protection

Drying

End

Anti-

Crease

Lit: Overdry protection is

working

Lit: programme is running.

Lit: End of programme.

Lit: Anti-Crease is running.

Start

Pauze

Pluizenfilter

Temperatuur

controle

Temperatuur

controle

Droog-

fase

Einde

Kreuk

beveiliging

* Test programmes according IEC 61121.

TRAD 6240

5019 407 00232

1. Check that all fastenings are closed and

that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to

make sure it doesn’t become tangled.

Sort laundry as follows:

A) By care symbols

(on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced

drying intensity only. Press

Gentle button.

Do not tumble dry

B) By amount and thickness/weight

Whenever the load to be dried exceeds

dryer capacity, separate laundry according

to weight (e.g. towels from thin

underwear).

C) By type of fabrics

Cotton/linen: Towels, cotton jersey, bed

and table linen made of cotton or linen.

Synthetics/Easy Care: blouses, shirts,

overalls, etc. made of polyester or

polyamide, as well as cotton/synthetic

mixes.

D) By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry: Woollens, silk, nylon

stockings, delicate embroidery, fabrics

with metallic decorations, bulky items such

as sleeping bags, etc.

Important: only use specific indicated

dryer-safe additives and rinse items

that have been treated with stain remover

thoroughly in plenty of water before

drying. Only use specific indicated

dryer-safe plastic items never and dry

rubber or articles contaminated with

vegetable oil in the dryer.

Programme and Options:

• To select a programme, turn the

programme selector knob. The start

indicator lamp is blinking, indicating

that the cycle needs to be started.

• To select an option, press the

corresponding button. The indicator

lamp in the button confirms that a

selection has been made.

• Press the button again to cancel the

option.

1. Having selected the desired

programme and options, press the

Start/Pause button.

As soon as the drying cycle is finished

the END indicator lamp is lit and the

laundry can be removed.

If the laundry is not removed at the end

of the drying cycle, an automatic anti-

crease cycle will operate for maximum

60 min. The drum rotates at regular

intervals, preventing the laundry from

creasing.

Anti-Crease protection re-distributes

laundry in the drum.

2. On completion of the programme, set

the programme selector knob to

position “0”.

When changing the programme during

the drying cycle, the dryer stops. The start

indicator lamp is blinking.

To operate the new programme, press the

Start/Pause button again.

To interrupt the dryer during operation

1. Set the programme selector knob to

Airing.

2. Press the Start button.

Wait at least 5 minutes before opening

the door to allow the dryer to cool down.

For your safety the programme stops

automatically if you open the door.

3. To restart, after door opening, close

the door and press the Start/Pause

button again.

Clean the lint filter at the end of every

drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Remove lint using a soft brush or your

fingertips.

4. Push the filter back into place.

If a fault occurs, before contacting our

After-Sales Service, make the following

checks to try and remedy the problem:

Drying takes too long / laundry is not

dry enough:

• Was the correct programme selected?

• Was the inserted laundry too wet

(Washing machine spin speed less than

800 rpm)?

• Is the lint filter dirty (filter indicator lamp

on)?

The dryer does not operate:

(after a power failure and/or

interruption to the mains supply,

always press the Start button).

• Is the plug properly inserted into the

mains electricity socket?

• Is there a power failure?

• Has the fuse blown?

• Is the door well closed?

• Has the programme been selected?

• Has the button been Start/Pause

pressed?

Lint filter indicator lamp light on:

• Is the lint filter clean?

• Is the vent hose blocked?

If, after carrying out the above checks

the malfunction persists or appears

again, turn the dryer off and call our

After-Sales Service (refer to guarantee).

Please specify:

• The nature of the fault.

• The dryer type and model.

• The service code (the number after the

word Service on the adhesive rating

plate) on the right-hand side when the

door is open.

• Your full address and phone number.

PREPARING THE LAUNDRY SELECTING A PROGRAMME & OPTIONS

STARTING & COMPLETING A

PROGRAMME

CHANGING A PROGRAMME

INTERRUPTING A PROGRAMME

DAILY MAINTENANCE & CLEANING

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

Produkt Specifikationer

Mærke:	Bauknecht
Kategori:	Tørretumbler
Model:	TRAD 6240

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauknecht TRAD 6240 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tørretumbler Bauknecht Manualer

Bauknecht TRKD 6627 Manual

3 August 2025

Bauknecht trkk 7846 Manual

15 Januar 2025

Bauknecht TRKA Koblenz 4590 Manual

15 Januar 2025

Bauknecht trkk 6840 Manual

15 Januar 2025

Bauknecht trk advance Manual

14 Januar 2025

Bauknecht TRAD 6267 Manual

4 December 2024

Bauknecht TRAD 6247 Manual

4 December 2024

Bauknecht T Soft M11 82 N Manual

4 December 2024

Bauknecht TRKK STUTTGART/2 Manual

8 Oktober 2024

Bauknecht TRK 4970 Manual

16 September 2024

Tørretumbler Manualer

Nyeste Tørretumbler Manualer

Zanussi-Electrolux TC7114W Manual

3 Oktober 2025

Zanussi-Electrolux ZDC5350W Manual

3 Oktober 2025

Zanussi-Electrolux TC7103W Manual

3 Oktober 2025

Zanussi-Electrolux TC 60 M Manual

3 Oktober 2025

Zanussi-Electrolux TC7114S Manual

3 Oktober 2025

Zanussi-Electrolux TD4113W Manual

3 Oktober 2025

Zanussi-Electrolux ZDC5355W Manual

3 Oktober 2025

Zanussi-Electrolux TD4100W Manual

3 Oktober 2025

Zanussi-Electrolux TCE7127W Manual

3 Oktober 2025

Zanussi-Electrolux ZD 130 R Manual

3 Oktober 2025