Bauknecht TRAK 6460 Manual

Bauknecht Tørretumbler TRAK 6460

Læs gratis den danske manual til Bauknecht TRAK 6460 (2 sider) i kategorien Tørretumbler. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Bauknecht TRAK 6460, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

5019 407 00115

Very

Wet

Load

Wet

Load

Fabric Drying

Cycles

& Drying levels

Drying options Buzzer & Anti-Crease

cannot be selected together

Gentle

Reduces drying

intensity

(recommended

for delicate

items)

Dryness

Adjustment

(Adjusts

Dryness Level

according to

wishes)

Buzzer

Signals/

Sounds end

of drying cycle

at Intervals

Anti-Crease

Prevents

laundry from

creasing

Start Delay

Delays the

drying cycle

start

Indicative

drying

times

(in minutes)

85’

120’

70’

100’

3.0

5.0 Cotton

max 5 kg

Cupboard dry

plus

65’

90’

50’

75’

3.0

5.0 Cupboard dry *

55’

75’

40’

65’

3.0

5.0 Iron dry *

20’

35’

15’

30’

1.0

2.5 Synthetics

max 2.5 kg

Cupboard dry * -

15’

30’

10’

25’

1.0

2.5 Iron dry -

30’ 20’ 1.5

Delicate

max 1.5 kg

Especially for delicate

items

(e.g. shirts). - - -

- - - Airing Laundry is aired and

refreshed for 30 minutes

without heating. - -

- - - Completes drying or

dries single items

(suitable for all fabrics). - -

QUICK REFERENCE GUIDE

Please also carefully read the

“Instructions for Use”.

TRAK 6460GB

Cotton

Synthetics

DelicateAiringTime

* Test programmes according IEC 61121.

Start

Pause Starts the drying cycle. The Start/

Pause indicator lamp is blinking

during the selection phase.

Press to confirm the final selection.

Programme

selection

Turn the programme selector knob to the

desired programme. The indicator next to

the programme name lights up. The start

indicator blinks to show, that the dryer is

in selection mode. After the Start / Pause

button is pressed the start indicator lamp

lights up and the programme starts.

Start delay

Delays the drying cycle start from 1

up to 12 hours.

To select the start delay turn the

programme selector knob to the desired

programme, select the desired options

and press the start delay button. With

each touch of the start delay button,

drying cycle start is delayed by one hour.

Press the Start/Pause button to confirm

your final selection. Start delay indicator

blinks and the count-down is running by

reducing the time in one hour steps. The

count-down is indicated by the blinking of

the start-delay indicator located above the

button. During count-down the drum will

turn from time to time to redistribute the

laundry. The pump may be heard working

for a short time.

To cancel or to change the previously set

time turn programme selector knob to “0”

or open the door.

Remaining time

indication

After cycle start a default drying time is

indicated depending on the selected

drying programme and the dryness

adjustment. After several minutes the

time will be adjusted to the real expected

remaining time, depending on size, type

and humidity of the load.

Dryness

Adjustment

Dryness adjustment is an option to adjust

the dryness of the laundry according to

your wishes. Select the desired

programme and the option dryness level

adjustment by pressing the button “

+“ for

more dry or the button “

–“ for more

humid. The selected dryness will be stored

as a pre-setting to the selected drying

programme. Using the drying programme

next time the pre-setting appears. By

pressing the dryness adjustment buttons

‘+’ or ‘–‘ the pre-setting can be changed.

Filter The indicator lamp lights up when the

filter needs cleaning.

Clean the filter at

the end of every cycle.

PROGRAMME SEQUENCE INDICATION

End The programme sequence is indicated

by lamps, switching on when

programme step starts and and

switching off when the programme

step is passed.

5019 407 00115

1. Check that all fastenings are closed and

that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to make

sure it doesn’t become tangled.

Sort laundry as follows:

A) By care symbols

(on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced

drying intensity only. Press gentle

button

Do not tumble dry

B) By amount and thickness/weight

Whenever the load to be dried exceeds

dryer capacity, separate laundry

according to weight (e.g. towels from

thin underwear).

C) By type of fabrics

Cotton/linen: towels, cotton jersey, bed

and table linen made of cotton or linen.

Synthetics/Easy Care: blouses, shirts,

overalls, etc. made of polyester or

polyamide, as well as cotton/synthetic

mixes.

D) By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry: woollens, silk, nylon

stockings, delicate embroidery, fabrics with

metallic decorations, bulky items such as

sleeping bags, etc.

Important: only use specific indicated

dryer-safe additives and rinse items that

have been treated with stain remover

thoroughly in plenty of water before drying.

Only use specific indicated dryer-safe

plastic items and never dry rubber or

articles contaminated with vegetable oil in

the dryer

(Option only available when

Programme is selected).

Push the button to turn the drum light on for

30 sec. and push again to turn the drum light

off.

Programme and Options:

• To select a programme, turn the

programme selector knob. The Start/

Pause indicator lamp is blinking,

indicating that the cycle needs to be

started.

• To select an option, press the

corresponding button. The indicator

lamp above the button confirms that a

selection has been made.

• Press the button again to cancel the

option.

1. Having selected the desired programme

and options, press the Start button.

If the laundry is not removed at the end

of the drying cycle, an automatic anti-

crease cycle will operate for maximum

60 min. The drum rotates at regular

intervals, preventing the laundry from

creasing.

Anti-Crease protection re-

distributes laundry in the drum.

When the Anti-Crease option is selected

and laundry has not been taken out, an

anti-crease cycle is activated for 12 hrs.

2. On completion of the programme, set the

programme selector knob to position

“ ”0.

When changing the programme during the

drying cycle, the dryer stops. The Start/Pause

indicator lamp is blinking.

To operate the new programme, press the

Start/Pause button again.

To interrupt the dryer during operation

1. Set the programme selector knob to

Airing.

2. Press the Start button.

Wait at least 5 minutes before opening

the door to allow the dryer to cool

down.

For your safety the programme stops

automatically if you open the door.

3. To restart, after door opening, close the

door and press the Start/Pause button

again.

Clean the lint filter at the end of every

drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Remove lint using a soft brush or your

fingertips.

4. Push the filter back into place.

If a fault occurs, before contacting our After-

Sales Service, make the following checks to

try and remedy the problem:

Drying takes too long / laundry is not

dry enough:

• Was the correct programme selected?

• Was the inserted laundry too wet

(Washing machine spin speed less than

800 rpm)?

• Is the lint filter dirty (filter indicator lamp

on)?

The dryer does not operate:

(after a power failure and/or

interruption to the mains supply,

always press the Start button).

• Is the plug properly inserted into the

mains electricity socket?

• Is there a power failure?

• Has the fuse blown?

• Is the door well closed?

• Has the programme been selected?

• Has the start-delay option been selected?

• Has the Start/Pause button been

pressed?

Lint filter indicator lamp on:

• Is the lint filter clean?

• Is the vent hose blocked?

All programme sequence indicators

blinking:

• Service call necessary.

Replacing the drum light bulb (if supplied):

• If the inside lamp does not work, the bulb

may be faulty.

• Unplug the dryer.

• Open the door and unscrew the glass

cover insie the drum.

• Replace the faulty bulb with a new one

and screw the glass cover back on.

• Replacement bulb: Philips 15W,

230/240V, E14.

If, after carrying out the above checks the

malfunction persists or appears again, turn

the dryer off and call our After-Sales Service

(refer to guarantee).

Please specify:

• The nature of the fault.

• The dryer type and model.

• The service code (the number after the

word Service on the adhesive rating

plate) on the right-hand side when the

door is open.

• Your full address and phone number.

PREPARING THE LAUNDRY

DRUM LIGHT OPTION

SELECTING A PROGRAMME & OPTIONS

STARTING & COMPLETING A

PROGRAMME

CHANGING A PROGRAMME

INTERRUPTING A PROGRAMME

DAILY MAINTENANCE & CLEANING

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

Produkt Specifikationer

Mærke:	Bauknecht
Kategori:	Tørretumbler
Model:	TRAK 6460

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauknecht TRAK 6460 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tørretumbler Bauknecht Manualer

Bauknecht trkk 7846 Manual

15 Januar 2025

Bauknecht TRKA Koblenz 4590 Manual

15 Januar 2025

Bauknecht trkk 6840 Manual

15 Januar 2025

Bauknecht trk advance Manual

14 Januar 2025

Bauknecht TRAD 6267 Manual

4 December 2024

Bauknecht TRAD 6247 Manual

4 December 2024

Bauknecht T Soft M11 82 N Manual

4 December 2024

Bauknecht TRKK STUTTGART/2 Manual

8 Oktober 2024

Bauknecht TRK 4970 Manual

16 September 2024

Bauknecht Excellence 9R GSF Manual

16 September 2024

Tørretumbler Manualer

Nyeste Tørretumbler Manualer

Blomberg LTK38030 Manual

19 Juni 2025

BEKO DHP10W Manual

19 Juni 2025

BEKO DC9W Manual

19 Juni 2025

Infiniton SD-BC8EWN Manual

19 Juni 2025

Infiniton SD-BC8EDX Manual

19 Juni 2025

Electrolux EW6D4183P1 Manual

19 Juni 2025

Haier HD90-C367GU1 Manual

18 Juni 2025

Sogo SS-3665-P Manual

18 Juni 2025

Blomberg LTA18320 Manual

18 Juni 2025

Haier HD90-CQ387U1 Manual

18 Juni 2025