Bauknecht wate 9573 3 Manual

Bauknecht Vaskemaskine wate 9573 3

Læs gratis den danske manual til Bauknecht wate 9573 3 (2 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 57 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 29 anmeldelser. Har du et spørgsmål om Bauknecht wate 9573 3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

GB WATE 9573/3 PROGRAMME CHART

5019 412 10045

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing. M0501

- tested and approved by The Woolmark Company -

Programme Care

Labels Type of wash / Notes

Max.

load

Detergents and additives Special Options Tempera-

ture

°C

Max.

Spin

Speed

rpm

Pre-

wash Main

Wash Softener Bleach Easy

Ironing Pre-

wash Intensive

Rinse Rinse

Hold Spin Speed

Reduction Start

Delay

Stryglet Forvask Intensiv

skyl

Skylle-

stop

Centrifuge-

ring

Udskudt

Start

Cotton /

Hygienic Bomuld/

Hygienic +

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts

etc. made of cotton, coloured cotton and linen.

For temperature selection, please respect the manufacturer's

recommendation on the care label. At a temperature of 80°C or more, this

programme eliminates bacteria, ensuring sanitization of your laundry. The

bacteria removal efficiency has been tested following a similar methodology to

the NF EN 13697 standard of Nov. 2001.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

5.0 ❉1) Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ 20 to 95 1200

Synthetics Blandet

Syntetisk

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

Trevira), polyamide (Perlon, Nylon) or blends with cotton. 2.0 ❉1) Yes ❉—❉ ❉ ❉ ❉ ❉ ❉ 20 to 60 1000 2)

Daily Mixed Dagligvask Slightly to normally soiled textiles made of cotton and/or synthetics. 3.0 —Yes ❉—❉—❉ ❉ ❉ ❉ 30 to 60 1200

Delicates Finvask Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1.5 ❉1) Yes ❉— — ❉—❉ ❉ ❉ 20 to 40 1000 2)

Rapid Quickvask Shortly worn outer clothing made of cotton, polyester, polyamide or blends

with cotton. 3.0 —Yes ❉— — — — ❉ ❉ ❉ 20 to 30 1200

Wool Uld

Only woollens, labelled with the woolmark and identified as machine

washable.

This programme (40°C) is tested and approved by The Woolmark Company

for machine washable wool.

If you select “Rinse Hold” do not leave items to soak for too long.

1.0 —Yes ❉— — — — ❉ ❉ ❉ 20 to 40 1000 2)

Handwash Håndvask

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark Company

for handwashable wool.

If you select “Rinse Hold” do not leave items to soak for too long. A very gentle

spin is used in this programme.

1.0 —Yes ❉— — — — ❉ ❉ ❉ 20 to 40 400 3)

Rinse + Spin Skyl +

Centrifugering —Programme for treating the laundry with starch and softener or to moisten the

laundry. For delicate laundry reduce the spin speed. 5.0 — — ❉— — — ❉ ❉ ❉ ❉ —1200

Spin Lang

centrifugering —Programme to spin cotton or linen laundry intensively with maximum spin speed. 5.0 — — — — — — — — ❉ ❉ —1200

Gentle spin Kort

centrifugering —Programme to spin delicate laundry gently with a restricted spin speed. 1.5 — — — — — — — — ❉ ❉ —1000 2)

Drain / Reset Tømning

Nulstil —Drain only - no spinning. Alternative method of terminating programme after

“Rinse Hold”. — — — — — — — — — — ❉— —

A. “Water Tap” Indication

B. Temperature Selection Buttons

C. “Programme Sequence” Indicator

D. “Spin Speed Reduction” Button

E. “Start Delay” Button

F. “Start/Pause” Button

When you select an option, the

corresponding indicator lights up, except if

the combination of programme, additional

options and temperature is not possible.

❉ : option / Yes: dosing required

1Do not use liquid detergents.

2For improved garment care spin speed is restricted to

1000 rpm in this programme.

3For improved garment care spin speed is restricted to

400 rpm in this programme.

EBA FC D

5019 412 10045

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized

conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the

values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump

drains the water out.

*** Reference programme for Energy label.

1. Close the drum doors and check that they are

properly locked.

2. Add detergents and additives into the dispenser to

no more then the “MAX” level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (if necessary)

3. Turn the programme selector knob to the

desired programme.

The remaining time display shows the duration of the

chosen programme (in hours and minutes) and the

indicator light of the “Start/Pause” button flashes.

The programme sequence and the predefined

spin speed indication corresponding to the

selected programme lights up.

The preselected temperature can be altered by

pressing the “+” or “-” button.

When you select an option authorized by the

programme, the corresponding indicator lights up,

except if the combination of programme,

additional options and temperature is not possible.

“Easy Ironing” button

• Can be used together with “Cotton”, “Synthetics” and

“Daily Mixed” programmes to make ironing easier.

• Increases the water quantity in rinsing and the

clothes are spun in a softer manner.

“Prewash” button

• Only for heavily soiled loads

(for example sand, granular dirt).

“Intensive Rinse” button

• The amount of water is increased to ensure a

more intensive rinse.

• This option is particularly suitable for areas with

very soft water or washing linen laundry for

people with skin allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water

without progressing to the final spin cycle to

avoid creasing and prevent colours from fading.

• This option is particularly recommended for the

“Synthetics”, “Delicates” and “Daily Mixed”

programmes.

• This function is particularly useful if you want to

postpone spinning to a later time, or if you want

to drain only.

Note: The programme with “Rinse Hold” stops

when the “Rinse Hold” indicator light flashes on the

“Programme Sequence Indicator”.

CONSUMPTION DATA

Programme Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)*

Cotton / Hygienic+ 95 5.0 49** 1.60 2:05

Cotton *** 60 5.0 48 0.85 2:15

Coloured Cotton 40 5.0 48 0.60 2:00

Synthetics 60 2.0 55** 0.70 1:30

Synthetics 40 2.0 50 0.50 1:15

Daily Mixed 40 3.0 45 0.45 1:00

Delicates 40 1.5 50 0.50 0:45

Rapid 30 3.0 35 0.40 0:30

Wool 40 1.0 55 0.60 0:45

Handwash 30 1.0 40 0.40 0:35

PREPARATION OF WASH CYCLE

SELECT THE DESIRED OPTION

Appliance in “Rinse Hold”:

• Press the “Rinse Hold” button again: the

programme will terminate automatically with the

selected spin cycle.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain /

Reset” programme and press the “Start/

Pause” button again.

“Spin Speed Reduction” button

• Every programme has an automatically allocated

maximum spin speed.

• Press the button to set another spin speed.

•If the spin speed “0” is selected, the final spin is

cancelled, but not the intermediate spins. The

programme ends with a drain cycle.

The “Start Delay” button allows the user to run the

machine at his convenience, for example at night

when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button several times to

select the delay time by 1 to 19 hours;

• Press the “Start/Pause” button. The indicator

light of the “Start/Pause” button lights up and

the lamp of the “Start Delay” button flashes.

• The time delay indication disappears when the

programme starts and is replaced by the

remaining time.

• The number of hours preselected can be reduced

later by pressing the “Start Delay” button again.

To cancel the “Start Delay” option

• Turn the programme selector to the “ ” position.

• Reselect the desired programme and options

and press the “Start/Pause” button.

Turn on the tap and press the “Start/Pause”

button. The indicator light of the “Start/Pause”

button lights up. The indicator lamp shows the

sequence reached by the programme. After starting

the programme, the programme sequence indicator

signals the Wash, Rinse and Spin phases.

Note: If there is a power interruption or if the

appliance is disconnected during the cycle, the

programme will run again from the point where it

was interrupted.

For safety reasons, the lid is locked during certain

phases of the cycle. At the end of the cycle or during

an interruption, the lid unlocks automatically after

about 1 minute.

• The remaining time is on “0: 00” and the “End”

lamp lights up.

1. Turn the programme selector to the “ ”

position.

2. Turn the tap off.

3. Open the lid and the drum doors and unload the

machine.

1. Select the new programme using the

programme selector. If necessary, select the

additional options and the spin speed. The

luminous indicator of the “Start/Pause”

button flashes.

Note: the “Start Delay” and “Prewash” options

cannot be selected after a programme change.

2. Press the “Start/Pause” button. The new

programme selected continues at the same

position where the previous programme was

interrupted.

Note: Do not add detergent for this

programme.

If, for any reason, you wish to interrupt the

programme for a certain time and continue it later:

1. Press the “Start/Pause” button. The light

flashes.

2. After the desired pause, press again on the

“Start/Pause” button.

1. Set the programme selector to “Drain / Reset”.

2. Press the “Start/Pause” button to start the

“Drain / Reset” programme.

START DELAY

PROGRAMME START

LID LOCK

END OF WASH CYCLE

CHANGE THE PROGRAMME OR OPTIONS

DURING THE CYCLE

PAUSE/INTERRUPT A PROGRAMME

CANCEL PROGRAMME

Produkt Specifikationer

Mærke:	Bauknecht
Kategori:	Vaskemaskine
Model:	wate 9573 3

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauknecht wate 9573 3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vaskemaskine Bauknecht Manualer

Bauknecht WM BK 10A CH A Manual

15 Juli 2025

Bauknecht Super Eco 845 A Manual

11 Juli 2025

Bauknecht WM Class 8AA Manual

5 Juli 2025

Bauknecht WAT 619 C EX Manual

4 Juli 2025

Bauknecht WT AO 86 43 N Manual

4 Juli 2025

Bauknecht WTL 56313 C Manual

30 Juni 2025

Bauknecht BW 719 Manual

30 Juni 2025

Bauknecht WAT Zen 6B Manual

29 Juni 2025

Bauknecht WAT 6313 C Manual

28 Juni 2025

Bauknecht WMT Eco Smart 6513 Z C Manual

28 Juni 2025

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer

Midea MTW55 Manual

1 August 2025

Midea MTW70 Manual

1 August 2025

Grundig GW5P57410W Manual

1 August 2025

AEG LTR63ECO Manual

1 August 2025

Grundig WT510 Manual

1 August 2025

Infiniton WM-9FB Manual

1 August 2025

Grundig GW75961TW Manual

1 August 2025

Grundig GW7P584109W Manual

1 August 2025

Grundig GW5P58410W Manual

1 August 2025

AEG LTR8E363C Manual

1 August 2025