Bauknecht WMC 6L55 Manual

Bauknecht Tørretumbler WMC 6L55

Læs gratis den danske manual til Bauknecht WMC 6L55 (2 sider) i kategorien Tørretumbler. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Bauknecht WMC 6L55, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

EN PROGRAMME CHART

= optional / Yes = dosing required.

1) For improved garment care, spin speed is restricted in these programmes. 5019 400 00323

Bauknecht is a registered trademark of Whirlpool USA

Programme Care

Labels

Max.

Load

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Detergents and additives Special options Start

delay Max.

Spin

Speed

rpm

Pre-

wash

Main

wash

Softener Cold

wash

Rapid Clean+ Pre-

wash

Intensive

rinse

Easy

ironing

Rinse

hold

Spin

Cotton

95 °C 95 °C

6.0

Normally to heavily soiled and robust white cotton laundry.

In case of heavy soiling or stains, you can add an oxygen-based bleach additive which can be used

at 95 °C. This programme eliminates bacteria, ensuring sanitization of your laundry. Yes — — max.

Cotton

40 - 60 °C 40 - 60 °C

6.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton

and linen. Yes max.

Jeans

40 °C 40 °C

4.0 Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers

and jackets. Yes —1000 1)

Synthetics

30 - 40 - 60 °C 30 - 40 - 60 °C

3.0 Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc.) or their

blends with cotton. Yes max.

Delicates

30 - 40 °C 30 - 40 °C 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. Yes — — — — 1000 1)

Daily load

40 °C 40 °C

4.0 Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load. —Yes ——— max.

Quick wash

30 °C 30 °C 3.0 Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

Brief programme to refresh your laundry. —Yes — — — — — max.

Wool/Handwash

cold - 40 °C

20 - 40 °C 1.0 Textiles made of wool, linen, viscose or silk (respect care label!) marked as hand-washable or

machine-washable. —Yes — — — — — 1000 1)

Cotton

40 - 60 °C 6.0 Normally soiled cotton laundry.

Standard cotton programme and most favourable programme in terms of combined water and

energy consumption for washing cotton laundry. - Reference programme for the Energy Label. —Yes — — — — max.

Rinse & Spin —6.0 Separate rinse and intensive spin programme.

Suitable for robust laundry. — — — — — — — max.

Spin —6.0 Separate intensive spin programme.

Suitable for robust laundry. — — — — — — — — — — max.

Drain — — Drain only – no spinning. Alternative method of terminating programme after “Rinse Hold”. — — — — — — — — — — — —

95°

60°

40°

60°

30°

30°40°

40°

40°20°

30°

40°

60°

}

A. “Door open” indicator

This washing machine is equipped with automatic

safety functions which detect and diagnose faults

at an early stage and react appropriately, e.g.:

B. “Service” indicator

C. “Water tap closed” indicator

D. “Clean pump” indicator

E. Programme selector

F. “Start/Pause” button

G. “Spin” button

H. Programme flow bar

I. “Reset” button

J. “Start delay” button

40°

60°

5019 400 00323

Bauknecht is a registered trademark of Whirlpool USA

Load the laundry, close the door and add detergent as indicated

on the front page and as described in the chapter “Detergent and

Additives” in your Instructions for Use. Turn the programme

selector to the desired programme and temperature. The

display shows the programme duration, and the predefined spin

speed lights up. The indicator blinks.“Start/Pause”

The washing machine is designed to save energy, therefore, if

you have selected a programme but do not start it within about

a quarter of an hour, it will switch off automatically. To switch it

on again, turn the programme selector to “Off/O” and then to the

desired programme again..

Push the button of any option desired - the indicator lights up.

If the combination programme/option or option/option is not

possible, the indicator switches off automatically.

“Cold wash” button

• Saves energy used for water heating while maintaining a

good wash result.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures (15 or 20 °C).

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for only lightly soiled laundry.

“Clean +” button

• Choose this option if you use an in-wash additive for stain

removal (powder, for example “Vanish”) - it will optimize the

additive’s efficiency to get better wash performance and

stain removal.

• Use with maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together with

your detergent (only use powder detergent with this option).

Respect the manufacturer’s dosing instructions.

• May prolong the programme by up to 15 minutes.

Appropriate for use of stain removers and bleaches on oxygen

basis. Chlorine or perborate bleaches must not be used!

“Prewash” button

• Adds a prewash cycle to the wash programme selected;

prolongs the programme by about a quarter of an hour.

• Recommended for heavily soiled laundry (e.g. with sand or

granular dirt).

• Do not use liquid detergent for the main wash when

selecting “Prewash”.

CONSUMPTION DATA Power consumption: in off-mode 0.16 W / in left-on mode 0.16 W.

Programme Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approximate programme duration

(hrs.min)

without “Rapid” with “Rapid”

Cotton 95 6.0 74 2.20** 2:40 —

Cotton 60 6.0 50 1.10 2:20 1:45

Cotton 40 6.0 64 0.70 2:05 1:15

Jeans 40 4.0 53 0.46 1:30 1:10

Synthetics 60 3.0 48 0.94 1:37 1:12**

Synthetics 40 3.0 42 0.40 1:20 0:55

Delicates 40 1.5 60 0.65 0:50 —

Delicates 30 1.5 60 0.40 0:46 —

Daily load 40 4.0 46 0.40 1:00 —

Quick wash 30 3.0 48 0.25 0:30 —

Wool/Handwash 40 1.0 45 0.55 0:40 —

*60 6.0 41 0.85 4:00 —

*60 3.0 30 0.58 — 3:00***

*40 3.0 30 0.56 — 3:00***

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual

water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.

15 °C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water

supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.

Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options

or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

*** Automatic adaptation of programme duration after detection of wash load.

60°

Cotton

60°

Cotton

40°

Cotton

*Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle

temperature.

LOAD LAUNDRY, ADD DETERGENT AND

SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• Particularly suitable for areas with very soft water, washing

baby linen and helping people with allergies.

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very

gentle spin.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and

prevent colours from changing.

• Particularly useful if you want to postpone spinning to a later

time, or if you want to drain only.

• The programme stops to “Rinse hold” at the time the “Rinse

hold” indicator in the programme flow bar is on. The “Start/

Pause” indicator blinks.

Terminate the “Rinse hold” option :

• Press the button ; the programme will “Start/Pause”

terminate automatically with the final spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, turn the programme

selector to the “Drain” programme and press the “Start/

Pause” button to start draining.

“Spin” button

• Every programme has a predefined spin speed; press the

button if you want to set a different spin speed.

• If spin speed “0” is selected, the final spinning is cancelled

and the water is drained out only. However, intermediate

spin phases remain during rinse.

The “Start delay” allows to run the machine at the

consumer’s convenience, for example at night when electricity is

cheaper. Do not use liquid detergent when activating “Start

delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select a delay time up to

24 hours.

• Press the button . “Start/Pause”

On the display, the start delay symbol and the dot between hours

and minutes blink. The countdown of the delay time begins.

• The delay time disappears when the programme starts and it

is replaced by the remaining programme duration.

• Once having pressed the “Start/Pause” button , the

delay time can be changed by pressing again the “Start

delay” button.

To cancel the “Start delay”

...before you press the “Start/Pause” button :

• Turn the programme selector to another position or press

the button .“Reset”

...after having pressed the “Start/Pause” button :

• Press the button - the selected start “Start/Pause”

delay disappears from the display.

Open the water tap and press the button . “Start/Pause”

The “Start/Pause” indicator lights up. The programme flow bar

shows the current programme phase, running from left to right

through Wash, Rinse, Spin/Drain.

When the laundry load is detected or the programme duration is

updated, an animation appears on the display.

Before starting and after end of a programme, the indicator lights to

show that the door can be opened. As long as a wash programme is

running, the door remains locked and must on no account be forced

open. In case you have an urgent need to open it during a running

programme, refer to “Reset a running programme”.

If one of the failure indicators blinks, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”: no or not sufficient inlet water.

“Service”: failure or malfunction of an electrical component.

“Clean pump”: waste water is not pumped out.

Spin speed blinks: unbalance during spinning.

• The “Door open” indicator lights up, and the display

shows “End”. After about a quarter of an hour, the washing

machine will switch off completely to save energy.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the button to pause the “Start/Pause”

programme. The indicator blinks.

2. Select the new programme and, if you want, another spin

speed and any options.

3. Press the button again. The new “Start/Pause”

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

The button cancels a programme before the end.“Reset”

• Press and hold the “Reset” button for a few seconds.

The water is drained. It may last some time until the door

can be opened.

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATOR

FAILURE INDICATORS

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

RESET A RUNNING PROGRAMME

- the sensor technology adapts drum movement, water, energy and programme duration to your wash load.

Produkt Specifikationer

Mærke:	Bauknecht
Kategori:	Tørretumbler
Model:	WMC 6L55
Bredde:	595 mm
Dybde:	565 mm
Højde:	850 mm
Produktfarve:	Hvid
Kontroltype:	Buttons, Rotary
Indbygget skærm:	Ja
Skærmtype:	LED
Strøm:	10 A
Energieffektivitetsklasse (gammel):	A++
Placering af apparat:	Fritstående
Dørhængsel:	Venstre
Ilægningstype:	Front-læsning
Tromlekapacitet:	6 kg
Maksimal centrifugeringshastighed:	1400 rpm
Forsinket start-timer:	Ja
Vaskeprogrammer:	Hygiene/anti-allergy, Black, Easy care, Hand/wool, Jeans/denim, Mix, Quick, White, Delicate/silk
Energiforbrug ved vask:	- kWh
Årligt energiforbrug vask:	169 kWh
Dør farve:	Hvid
Spin-tørre klasse:	A
Årligt vandforbrug vask:	8500 L
Vandforbrug pr. cyklus:	- L
Vandpåfyldning:	Kold