RECOMMENDED ENVIRONMENTAL SAFEGUARDS
Before you use this cooker hob we suggest that you read the
instructions carefully and keep them for future consultation.
• Keep packing material (plastic bags, styrofoam blocks, etc...) out of
the reach of children as they can be dangerous.
• Make sure the cooker hob is intact and has not undergone damage
during shipment.
• Make sure the installation and gas and/or electric connections are
made by a qualified expert according to the manufacturer’s
instructions and in compliance with the local regulations in effect.
• Any exhaust hoods installed over the cooker hob should be
positioned at the height indicated (pict. A).
Packing: the packing material can be recycled and is marked with the
recycle symbol. Pieces of styrofoam, if any, should not be disposed of
carelessly. Dispose of this waste material at local dumps.
Product: the cooker hob is made of materials suitable for recycling.
Dispose of it in respect of the local regulations for waste disposal, after
making sure it cannot cause any damage. We recommend cutting the
power cable.
FOR INSTALLERS
TECHNICAL INFORMATION
Installation of BUILT-IN UNIT
To install built-in cooker hobs make an opening in the top of the cabi-
net with measurements A-B (pict. 1) as indicated in mm. in the table
below:
For the flush-mount version of the hobs (model 7043, 7044, 7045)
please refer to the specific instructions inside the box.
Note: Before installing make sure the local gas distribution system (type
and pressure of the gas) and settings of the cooker hob are compatible
(see rating plate).
(pict. A)
B A R
29x50 cooker hobs 480 270
59x50 cooker hobs 480 570
76x50 Mod. 7024V 480 740
86x50 cooker hobs 480 840
76x50 Mod. 7065V 480 570/740
79x50 cooker hobs 480 770
116x50 cooker hobs 480 1140
Rondò Ø 52 units diam. 500 /
79x50 cooker hobs Soft 480 770 135
92x54 cooker hobs 520 900
Cooker hobs angolare (fig. 1A)