BeamZ LCB252 150.558 Manual

BeamZ Effektmaskine LCB252 150.558

Læs gratis den danske manual til BeamZ LCB252 150.558 (12 sider) i kategorien Effektmaskine. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om BeamZ LCB252 150.558, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

www.beamzlighting.com

150.558 LCB-252 LEDColors 252x10mmDMX-8segm

User Manual

USER’S MANUAL

HANDLEIDING

GEBRAUCHSANWEISUNG

MANUAL DE INSTRUCCIONES

www.beamzlighting.com

ENGLISH

Congratulations to the purchase of this Beamz light effect. Please read this manual thoroughly prior to using the unit in order to

benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all

precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to

avoid electrical shock. Keep the manual for future reference.

- Prior to using the unit, please ask advice from a specialist.

When the unit is switched on for the first time, some smell

may occur. This is normal and will disappear after a while.

- The unit contains voltage carrying parts. Therefore do NOT

open the housing.

- Do not place metal objects or pour liquids into the unit This

may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as radiators,

etc. Do not place the unit on a vibrating surface. Do not

cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always pull

the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they need to

be replaced by a qualified technician.

- If the unit is damaged to such an extent that internal parts

are visible, do NOT plug the unit into a mains outlet and DO

NOT switch the unit on. Contact your dealer. Do NOT

connect the unit to a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the unit to an earthed mains outlet

(220-240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule is:

Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the unit with an extra safety chain if the unit is ceiling

mount. Use a truss system with clamps. Make sure nobody

stands in the mounting area. Mount the effect at least 50cm

away from inflammable material and leave at least 1 meter

space on every side to ensure sufficient cooling.

- This unit contains high intensity LEDs. Do not look into the

LED light to prevent damage to your eyes.

- Do not repeatedly switch the fixture on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave the

unit unattended.

- Do not use cleaning sprays to clean switches. The residues

of these sprays cause deposits of dust and grease. In case

of malfunction, always seek advice from a specialist.

- Only operate the unit with clean hands.

- Do not force the controls.

- If the unit has fallen, always have it checked by a qualified

technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit off prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables prior to

moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains voltage

of the country is suitable for this unit.

- Keep the original packing material so that you can transport

the unit in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read

and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the effects that this light effect may have on them.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their

guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and

35°C/95°F.

Produkt Specifikationer

Mærke:	BeamZ
Kategori:	Effektmaskine
Model:	LCB252 150.558
Bredde:	1025 mm
Dybde:	65 mm
Højde:	85 mm
Vægt:	1700 g
Produktfarve:	Sort
Lampe type:	LED
Strømkilde:	Vekselstrøm
Antal lamper:	252 Lampe( r)
Lysfarve:	Blue, Green, Red
Indgangsspænding:	220 - 240 V
Indgangsfrekvens:	50 Hz
Lysdæmper:	Ja
Antal DMX kanaler:	48 kanaler
XLR udgående:	1
Bold diameter:	- "
XLR indgang:	Ja