BeamZ Plasma Ball 153.170 Manual

BeamZ Effektmaskine Plasma Ball 153.170

Læs gratis den danske manual til BeamZ Plasma Ball 153.170 (6 sider) i kategorien Effektmaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om BeamZ Plasma Ball 153.170, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

153.170

Plasma Ball 20cm

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

ENGLISH

Congratulations to the purchase of this Beamz light effect. Please read this manual thoroughly prior to using the unit in order to benefit fully from

all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or

electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

- Prior to using the unit, please ask advice from a specialist. When

the unit is switched on for the first time, some smell may occur. This

is normal and will disappear after a while.

- The unit contains voltage carrying parts. Therefore do NOT open

the housing.

- Do not place metal objects or pour liquids into the unit This may

cause electrical shock and malfunction.

- Do not place the unit near heat sources such as radiators, etc. Do

not place the unit on a vibrating surface. Do not cover the

ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A faulty or

damaged mains lead can cause electrical shock and malfunction.

- When unplugging the unit from a mains outlet, always pull the plug,

never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they need to be

replaced by a qualified technician.

- If the unit is damaged to such an extent that internal parts are

visible, do NOT plug the unit into a mains outlet and DO NOT

switch the unit on. Contact your dealer. Do NOT connect the unit to

a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the unit to rain and

moisture.

- All repairs should be carried out by a qualified technician only.

- Connect the unit to an earthed mains outlet (220-240Vac/50Hz)

protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a longer

period of time, unplug it from the mains. The rule is: Unplug it from

the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room temperature

before you switch it on. Never use the unit in humid rooms or

outdoors.

- During operation, the housing becomes very hot. Do not touch it

during operation and immediately after.

- To prevent accidents in companies, you must follow the applicable

guide lines and follow the instructions.

- Secure the unit with an extra safety chain if the unit is ceiling mount.

Use a truss system with clamps. Make sure nobody stands in the

mounting area. Mount the effect at least 50cm away from

inflammable material and leave at least 1 meter space on every

side to ensure sufficient cooling.

- This unit contains high intensity LEDs. Do not look into the LED

light to prevent damage to your eyes.

- Do not repeatedly switch the fixture on and off. This shortens the

life time.

- Keep the unit out of the reach of children. Do not leave the unit

unattended.

- Do not use cleaning sprays to clean switches. The residues of

these sprays cause deposits of dust and grease. In case of

malfunction, always seek advice from a specialist.

- Only operate the unit with clean hands.

- Do not force the controls.

- If the unit has fallen, always have it checked by a qualified

technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the varnish.

Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause interference.

- Only use original spares for repairs, otherwise serious damage

and/or dangerous radiation may occur.

- Switch the unit off prior to unplugging it from the mains and/or other

equipment. Unplug all leads and cables prior to moving the unit.

- Make sure that the mains lead cannot be damaged when people

walk on it. Check the mains lead before every use for damages and

faults!

- The mains voltage is 220-240Vac/50Hz. Check if power outlet

match. If you travel, make sure that the mains voltage of the country

is suitable for this unit.

- Keep the original packing material so that you can transport the unit

in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause

a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks should be aware of

the effects that this light effect may have on them.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

General description:

This Lighteffect generates a dazzling light show of lightning in the globe. Touching the glass will attract lightning to your fingertips.

Placing:

Remove the device from the box and place it on a solid surface. Then insert the adapter plug into the unit (side) and insert the adapter into the

outlet. The device is ready for use.

Use:

On the back of the device is a switch with 3 positions. (Off / sound activated / on).

If the ball is touched with the fingertips, the produced beam will focus itself to this point. In this way the pattern in the Plasma Ball will be

influenced continuously and you will have endless fun.

Specifications:

Power supply: ............................................................ 220-240 Vac / 50 Hz (via adaptor)

Ball diameter: ....................................................................................................... 20 cm

Weight: ................................................................................................................ 0.7 kg

Produkt Specifikationer

Mærke:	BeamZ
Kategori:	Effektmaskine
Model:	Plasma Ball 153.170
Bredde:	200 mm
Dybde:	200 mm
Højde:	295 mm
Vægt:	700 g
Produktfarve:	Sort
Strømkilde:	Vekselstrøm
Indgangsspænding:	12 V
Bold diameter:	200 "