Behringer Bass Overdrive BOD400 Manual

Behringer Guitar Bass Overdrive BOD400

Læs gratis den danske manual til Behringer Bass Overdrive BOD400 (24 sider) i kategorien Guitar. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Behringer Bass Overdrive BOD400, eller vil du spørge andre brugere om produktet?

Side 1/24
BASS OVERDRIVE BOD400
Authentic Tube-Sound Overdrive Eects Pedal
Thank you for showing your condence in us by purchasing the
Behringer BASS OVERDRIVE BOD400. This high-quality eects
pedal is specically designed for bass applications. Thanks to its
high-performance features you will achieve tube-like distortion,
smooth sustain and super fat tone with maximum punch.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The control allows you to boost/cut the high-frequency range. HIGH
(3) The control allows you to boost/cut the low-frequency range. LOW
(4) Use the control to adjust the amount of overdrive.GAIN
(5) With the BAL(ance) control you can adjust the amount of the dry
direct signal and the eect signal.
(6) The ON/BATT LED illuminates when the eect is activated. It also
serves as a battery level indicator.
(7) Use the footswitch to activate/deactivate the eect.
(8) Use this ¼" TS connector to plug in the instrument cable.IN
(9) The ¼" TS connector sends the signal to your amp. OUT
Use the connection at the front of the unit to plug in a 9 V power DC IN
supply (not included).
The is located on the bottom. Open the lid to BATTERY COMPARTMENT
install or replace the 9 V battery.
The BOD400 has no on/o switch. As soon as you insert the
jack into the in connector, the BOD400 begins running.
When not using the BOD400, remove the jack from the in
connector. This extends the life of the battery.
The is located on the bottom.SERIAL NUMBER
V 1.0
(1)
(3)
(9) (8)
(5)
(6)
(7)
(4)
(2)
2BASS OVERDRIVE BOD400
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at musictribe.com/warranty.
4. Specications
In
Connector ¼" TS
Impedance 50 kΩ
Out
Connector ¼" TS
Impedance 1 kΩ
Power Supply
9 V , 100 mA regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 – 60 Hz
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions
approx. 54 x 70 x 123 mm
(H x W x D) (2.1 x 2.8 x 4.8")
Weight approx. 0.33 kg (0.7 lbs)
Behringer is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may therefore differ from those listed or shown.


Produkt Specifikationer

Mærke: Behringer
Kategori: Guitar
Model: Bass Overdrive BOD400

Har du brug for hjælp?

Hvis du har brug for hjælp til Behringer Bass Overdrive BOD400 stil et spørgsmål nedenfor, og andre brugere vil svare dig