Behringer Heavy Distortion HD300 Manual

Behringer Guitar Heavy Distortion HD300

Læs gratis den danske manual til Behringer Heavy Distortion HD300 (23 sider) i kategorien Guitar. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Behringer Heavy Distortion HD300, eller vil du spørge andre brugere om produktet?

Side 1/23
HEAVY DISTORTION HD300
Heavy Metal Distortion Eects Pedal
Thank you for showing your condence in us by purchasing the
Behringer HEAVY DISTORTION HD300. This high-quality eects
pedal enables you to produce super thick, tube-like distortion plus
endless sustain. Thanks to its high-performance features you can
achieve the typical hard rock or heavy metal distortion sounds, when
playing over a clean amp channel.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The control allows you to shape your overall sound.TONE
(3) The control allows you to boost/cut the low-frequency BOTTOM
range.
(4) The DIST(ortion) control adjusts the amount of distortion.
(5) The control adjusts the gain for more extreme GAIN BOOST
distortion sounds.
(6) The ON/BATT LED illuminates when the eect is activated. It also
serves as a battery level indicator.
(7) Use the footswitch to activate/deactivate the eect.
(8) Use this ¼" TS connector to plug in the instrument cable. IN
(9) The ¼" TS connector sends the signal to your amp.OUT
Use the connection to plug in a 9 V power supply (not included). DC IN
The is located underneath the pedal cover. BATTERY COMPARTMENT
To install or replace the 9 V battery (not included), press the hinges with
a ballpoint pen and remove the pedal cover. Be careful not to scratch
the unit.
V1.0
(1)
(3)
(9)
(5)
(6)
(8)
(7)
(2)
(4)
2HEAVY DISTORTION HD300
The HD300 has no on/o switch. As soon as you insert the
plug into the in connector, the HD300 is on. When not in
use, remove the plug from the in connector. This extends
the life of the battery.
The SERIAL NUMBER is located at the underside.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at musictribe.com/warranty.
4. Specications
In
Connector ¼" TS
Impedance 500 kΩ
Out
Connector ¼" TS
Impedance 1 k
Power Supply
9 V , 100 mA regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 "
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may therefore differ from those listed or shown.


Produkt Specifikationer

Mærke: Behringer
Kategori: Guitar
Model: Heavy Distortion HD300

Har du brug for hjælp?

Hvis du har brug for hjælp til Behringer Heavy Distortion HD300 stil et spørgsmål nedenfor, og andre brugere vil svare dig