Behringer Ultra OctaverUO300 Manual

Behringer Guitar Ultra OctaverUO300

Læs gratis den danske manual til Behringer Ultra OctaverUO300 (23 sider) i kategorien Guitar. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Behringer Ultra OctaverUO300, eller vil du spørge andre brugere om produktet?

Side 1/23
ULTRA OCTAVER UO300
3-Mode Octaver Eects Pedal
Thank you for showing your condence in us by purchasing the
Behringer ULTRA OCTAVER UO300. This high-quality eects pedal
creates a monster sound by adding two additional tones using your
guitar—one and two octaves below the original tone. Thanks to its
high-performance features you’ll get natural, clear octave sounds with
constant pitch, even for staccato playing.
Octave eect is possible due to a circuitry that generates signals one or
more octaves below the input signal.
1. Controls
(1) The selector allows you to optimize the eects pedal RANGE
for HIGH, MID and LOW frequencies and use instruments with
dierent frequency ranges (guitar, bass guitar, keyboard, etc.)
(2) The control adjusts the level of the original input signal.DIRECT
(3) The OCT 1 control adjusts the level of the generated signal one
octave below the original signal.
(4) The control adjusts the level of the generated signal two OCT 2
octaves below the original signal.
(5) The blue LED illuminates when the eect is activated. ON/BATT
Italso serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS connector to plug in the instrument cable.IN
(8) The ¼" TS connector sends the signal to your amp.OUT
Use the connection at the front of the unit to plug in a 9 V power DC IN
supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
V1.0
(5)
(1)
(7)
(4)
(6)
(3)(2)
(8)
2ULTRA OCTAVER UO300
The UO300 has no on/o switch. As soon as you insert the
jack into the in connector, the UO300 begins running. When
not using the UO300, remove the jack from the in connector.
This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at musictribe.com/warranty.
4. Specications
In
Connector ¼" TS
Impedance 500 kΩ
Out
Connector ¼" TS
Impedance 1 k
Power Supply
9 V , 100 mA regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 54 x 70 x 123 mm
(H x W x D) (2.1 x 2.8 x 4.8")
Weight approx. 0.33 kg (0.7 lbs)
Behringer is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may therefore differ from those listed or shown.


Produkt Specifikationer

Mærke: Behringer
Kategori: Guitar
Model: Ultra OctaverUO300

Har du brug for hjælp?

Hvis du har brug for hjælp til Behringer Ultra OctaverUO300 stil et spørgsmål nedenfor, og andre brugere vil svare dig