BEKO DIN 5631 Manual

BEKO Opvaskemaskine DIN 5631

Læs gratis den danske manual til BEKO DIN 5631 (2 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om BEKO DIN 5631, eller vil du spørge andre brugere om produktet?

Side 1/2
QUICK REFERENCE GUIDE EN
Programme Table
Programme number 1 2 3 Reference* 4 5 6
Programme name
Cleaning temperature
Degree of Soiling Suitable for removing the
remnants on the soiled dishes
that will be kept waiting in the
machine for a few days, and
thus, for preventing the bad odor
buildup.
Suitable for lightly soiled daily
dishes that are scraped or pre-
cleaned.
Most economical washing
program for the medium
soiled daily dishes that are
kept waiting.
Daily washing program at
which the medium soiled
dishes that are kept waiting
are cleaned in the fastest
way.
Suitable for heavily soiled
dishes, pots and pans.
Determines the soiling
degree of the dishes and
sets the temperature and
amount of the washing water
as well as the washing time
automatically. Suitable for all
types of dishes.
- Few Medium Medium High Medium to high
Detergents
A=25 cm³/15 cm³ B=5 cm³ - A A+B A+B A+B A
Programme sequence
(without options)
Pre-wash
End
Wash
Cold rinse
Hot Rinse
End
Pre-wash
Wash
Cold rinse
Hot Rinse
Dry
End
Wash
Cold rinse
Hot Rinse
Dry
End
Pre-wash
Wash
Cold rinse
Hot Rinse
Dry
End
The programme sequence
is adjusted to the amount
of soiling
Duration (min) 15 30 163 58 136 78-156
Water (I) 4 10,2 13 10,2 14,8 10,4-14,0
Energy (kWh) - 0,75 1,02 1,24 1,45 0,90-1,45
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.
! Attention: Please read the operating manual prior to operating the machine for the first time.
Starting your machine
Open the tap.•
Plug in to the socket.•
Open the door of the dishwasher.•
Place the dishes in accordance with the instructions in the •
user manual.
Make sure that the upper and lower impellers rotate freely.•
Put sufficient amount of detergent in the detergent dispenser •
and close its lid.
Make sure that indicators on programme display are •
illuminated by pressing On / Off key.
Check if the Salt and Rinse Aid indicators light and add salt •
and / or rinse aid if needed.
Since different salt brands in the market have different particle
sizes and since the water hardness may vary, dissolution of
the salt in water may take a couple of hours. Therefore, Salt
Indicator remains on for a while after adding salt into the
machine.
You may use Half Load / Tablet Detergent Key and Time •
Delay key features as necessary.
Refer to "Table of Programme Data and Average •
Consumption Values" to select a suitable programme.
Select the desired programme with Programme Selection key.•
Press Start / Pause / Cancel key to start the programme.•
Pay attention not to open the door of the machine when it is
running. If you need to open the door, safety system will stop
your machine. There may be a rush of vapour when you open
the door of your machine; be careful. The programme will
resume running when you close the door.
When the programme you have selected comes to an end, an •
audible warning signal with intervals of 8 seconds will warn
you to turn off your machine. This audible signal will warn you
10 times before it turns off.
Open the door of the dishwasher.•
Press On / Off key to turn off your machine.•
Indicator lights on the programme display will turn off.•
Close the tap.•
Unplug the machine from the socket.•
Leave your dishes in the machine for about 15 minutes after
they are washed in order to have them cooled down. Your
dishes will dry in a shorter time if you leave the door of your
machine ajar during this period. This will increase the drying
effectiveness of your machine.
12
13
Half Load / Tablet
Detergent Key
Programme Selection Key
11 Programme Indicator
9
10
Remaining Time / Time delay
Indicator
Tablet Detergent Indicator
Half Load Indicator
Salt Indicator
On / Off Key
1
2
3
4Start / Pause / Cancel
Indicator
8Rinse Aid indicator
6
7
5
Time Delay Indicator
Start / Pause / Cancel Key
Time Delay Key
- 50°C
35°C 60°C 70°C 40°C - 65°C
AutoPre-wash 30 Min Quick&Clean Intensive
QUICK REFERENCE GUIDE EN
On / Off Key
When you press On / Off key, indicator lights illuminate on the
display for ON position. The lights turn off in OFF position.
Salt level indicator light
When this indicator light comes on, you must
refill special salt (If applicable).
In machines which do not possess an electrical
salt indicator, the salt content can be read on
the container for the salt. When the visual fill
indicator is dark, there is enough salt in the
container.
When the colour is light, open the container and add dishwasher
salt.
Rinse aid level indicator light
If this indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser
and refill rinse aid.
Programme Selection Key
Refer to "Table of Programme Data and Average Consumption
Values" to select a programme suitable for your dishes.
Select the desired programme with programme selection key.
Visual Indicator
17 9857 01 00_AG
Half Load / Tablet Detergent Key
Half Load / Tablet Detergent Key allows you to turn on and off the
Half Load and Tablet Detergent functions of your machine.
Half Load Function
If you want to run your machine without loading it completely, place
your dishes into the machine as you desire. Press On / Off key to
turn on your machine. Press the Half Load / Tablet Detergent key
after selecting the desired programme until Half Load Indicator lights
up, then press Start / Pause / Cancel key and close the door of your
machine. With the Half Load option you can use every part of your
lower and upper baskets and you can save from both water and
power.
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet
Detergent function allows obtaining a better drying performance
from the multi-purpose detergents such as 2in1, 3in1, 4in1, 5in1,
etc., called as all-in-one detergents. Tablet Detergent Indicator lights
when the Tablet Detergent function is selected.
Salt and Rinse Aid indicators turn off when this function is activated.
Turn on your machine by pressing the On / Off key to use the Tablet
Detergent function. Press the Half Load / Tablet Detergent key after
selecting the desired programme until Half Load Indicator lights up,
then press Start / Pause / Cancel key and close the door of your
machine.
To use the Half Load and Tablet Detergent functions concurrently,
turn on your machine by pressing the On / Off key and then press
the Half Load / Tablet Detergent key until Half Load and Tablet
Detergent Indicators illuminate together.
If you have used Half Load or Tablet Detergent features during
the last programme you used, Half Load or Tablet Detergent
function will remain active in the next washing programme you
will select. If you do not want to use these functions in the new
programme you have selected, press the Half Load / Tablet
Detergent key until the indicator of the relevant function turns
off.
Changing Warning Sound Volume
Press and hold Half Load / Tablet Detergent key for 5 seconds until
S:03 appears on the display. Every time you press the Half Load /
Tablet Detergent key, the warning sound level will change as - - Off,
S:01 Low, S:02 Medium, and S:03 High. Turn off your machine
using the On / Off key to save it. Factory setting of your machine is
S:03.
Time Delay
Using the Time Delay key, you may delay the starting time of your
programme up to 9.5 hours with increments of 30 minutes. Press
Start / Pause / Cancel key after setting the Time Delay and close
the door of your machine. Once the time delay is over, the selected
programme will start automatically.
Start / Pause / Cancel Key
When you press the Start / Pause / Cancel key, the washing
programme you have selected will start.
(Start / Pause / Cancel indicator lights in Start mode, and turns off
in Pause mode)
To press the Start / Pause / Cancel key, wait for two seconds
after you turn on the machine by pressing the On / Off key.
Canceling a programme
To cancel the program selection while the machine is operating
open the door.
! Care must be taken when opening the door, as steam will escape.
Press and hold Start / Pause / Cancel key for 3 seconds. Release
the key as the Start / Pause / Cancel indicator starts flashing.
Once you close the door of your machine, draining is completed
in 2 minutes and the machine gives an audible warning when it is
completed.
There might be residues of detergent or rinse aid left in the
machine and / or on the pieces being washed depending on
the step the programme you have cancelled was in.
Visual Indicator
(If applicable)


Produkt Specifikationer

Mærke: BEKO
Kategori: Opvaskemaskine
Model: DIN 5631
Bredde: 598 mm
Dybde: 548 mm
Højde: 820 mm
Vægt: 39000 g
Indbygget skærm: Ja
Skærmtype: LCD
Energieffektivitetsklasse (gammel): A++
Årligt energiforbrug: 258 kWh
Placering af apparat: Fuldt indbygget
Støjniveau: 47 dB
Antal vaskeprogrammer: 6
Forsinket start-timer: Ja
Understøttede scanningstilstande: 1150 mm
Dør farve: Ikke anvendelig
Vaskeklasse: A
Vandforbrug pr. cyklus: 12 L
Farve på kontrolpanel: Sort
Antal kuverter: 12 kuverter
Forsinket start (maks.): 30 t
Halv belastning: Ingen
Tørringsklasse: A
Årligt vandforbrug: 3360 L
Indikator for afspændingsmiddel: Ja
Energiforbrug pr. cyklus: 0.9 kWh
Antal temperaturindstillinger: 5
Indikator for resterende tid: Ja
Temperatur (maks): 60 °C
Saltindikator: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til BEKO DIN 5631 stil et spørgsmål nedenfor, og andre brugere vil svare dig