BenQ DC C520 Manual

BenQ Kamera DC C520

Læs gratis den danske manual til BenQ DC C520 (30 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om BenQ DC C520, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/30

Welcome

DC C520 Digital Camera

DC C520 Digital CameraDC C520 Digital Camera

UsUse

eer

rr’s

’s

’s’s Ma

Ma Man

nnu

uua

aal

Copyr

CopyrCopyright

ight

ightight

reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or

computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chem-

ical, manual or otherwise, without the prior written permission of this company.

Discl

DisclDisclaimer

aimer

aimeraimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with

respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness

for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication

and to make changes from time to time in the contents hereof without obligation of this company

to notify any person of such revision or changes.

TTaking care of your camera

aking care of your camera

aking care of your cameraaking care of your camera

• Do not use your camera in the following environmental range: temperature below 0°C or above

40°C.

• Do not use or store your camera in the environments listed below:

– Direct sunlight

– High and dusty places

– Next to an air conditioner, electric heater or other heat sources

– In a closed car that is in direct sunlight

– Unstable locations

• If your camera becomes wet, wipe it with a dry cloth as soon as possible.

• Salt or seawater may cause severe camera damage.

• Do not use solvents, such as alcohol, to clean your camera.

• If the lens is dirty, use a lens brush or soft cloth to clean the lens. Do not touch the lens with your

fingers.

• To prevent electric shock, do not attempt to disassemble or repair your camera by yourself.

• Water may cause a fire or electric shock. Therefore, store your camera in a dry place.

• Do not use your camera outdoors when it is raining or snowing.

• Do not use your camera in or near water.

• If a foreign substance or water gets in your camera, please turn the power off immediately and

remove the batteries. Remove the foreign substance or water, and send it to the maintenance cen-

ter.

• Transfer the data to the computer as soon as possible to avoid losing your images and / or video

clips.

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Table of Contents

1.1. Tourin

Tourin

TourinTouring your

g your

g yourg your DC C520

DC C520

DC C520 DC C520 ........................................................ 1

1.1 Checking the package contents ....................................... 1

1.2 DC C520 components .................................................... 1

1.2.1 Front view ........................................................... 1

1.2.2 Rear view............................................................. 2

1.2.3 LED indicators ..................................................... 2

2.2. Preparing Your DC C520 for Use

Preparing Your DC C520 for Use

Preparing Your DC C520 for UsePreparing Your DC C520 for Use ........................................ 3

2.1 Installing the batteries .................................................... 3

2.2 Inserting and removing an SD memory card ................... 3

3.3. Using the DC C520

Using the DC C520

Using the DC C520Using the DC C520 ............................................................... 4

3.1 Mode dial....................................................................... 4

3.2 LCD monitor information (camera mode)...................... 5

3.3 Getting started................................................................ 6

3.3.1 Turning the power on / off ..................................... 6

3.3.2 Choosing the screen language ................................. 6

3.3.3 Setting the date and time ........................................ 6

3.3.4 Using the flash...................................................... 7

3.3.5 Using the self-timer............................................... 7

3.3.6 Using the zoom function........................................ 8

3.3.7 Burst................................................................... 9

3.3.8 Auto exposure bracketing (AEB) ............................. 9

3.4 Menu options............................................................... 10

3.4.1 Camera menu .................................................... 10

3.4.2 Video mode ....................................................... 12

3.4.2.1 LCD monitor information (video mode).......... 12

3.4.2.2 Recording video clips .................................... 12

3.4.2.3 Video menu ................................................ 13

3.4.3 Playback mode ................................................... 13

3.4.3.1 LCD monitor information (image playback)..... 13

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Touring your DC C520 1

1TOURING YOUR DC C520

1.1 Checking the package contents

Carefully unpack your kit box and ensure that you have the following items.

If any of the items are missing or appear to be damaged, contact your dealer. Save the

packaging in case you need to ship your camera for service.

1.2 DC C520 components

1.2.1 Front view

1. User’s Manual

2. DC C520 digital

camera

3. USB cable

4. AA batteries

5. Hand strap

6. DC C520 software

CD-ROM

7. Pouch

8. AV cable

1. Shutter button

2. Built-in flash

3. Power button

4. Mode dial

5. Self-timer LED

6. Lens

7. Beeper

8. PC (USB) / AV Out terminal

9. Microphone

BenQ DC 5530 User’s Manual

English

EnglishEnglish

Touring your DC C5202

1.2.2 Rear view

1.2.3 LED indicators

• The LCD on the digital camera is manufactured with sophisticated technology; however,

the display may have some light spots or show unusual colors. This is normal and does

not indicate display malfunction, nor will this affect the pictures you take with the camera.

Indi

IndiIndicat

cat

catcator

oror State

State

StateState Descr

Descr

DescrDescripti

ipti

iptiiption

onon

Status LED

Solid red • The digital camera is powering up.

Solid green • The digital camera is ready to capture images or record video clips.

Blinking green • The USB communication / transfer is in progress.

Blinking red • The flash is charging.

Self-timer LED Blinking red • The self-timer function is activated.

1. W

[ ] Thumbnail button

[ ] Zoom out button

2. T

[ ] Zoom in button

3. Strap eyelet

4. [ ] Rec-play button

5. [ ] Menu button

6. [ ] Delete button

7. [ ] Arrow button (Up)

8. [ ] Arrow button (Right)

[ ] Self-timer button

9. [ ] Arrow button (Down)

10. [ ] Arrow button (Left)

[ ] Flash button

11. Battery / SD memory card cover

12. OK button

DISP button

13. Tripod socket

14. LCD monitor

15. Status LED

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Preparing Your DC C520 for Use 3

2PREPARING YOUR DC C520 FOR USE

2.1 Installing the batteries

You can use two AA batteries to power up the camera. Make

sure that the power of the digital camera is off before

inserting or removing the batteries.

TTo insert the batteries:

o insert the batteries:

o insert the batteries:o insert the batteries:

1. Make sure the camera is turned off.

2. Open the battery cover.

3. Insert the batteries in the correct orientation as shown

in the illustration.

4. Close the battery cover.

TTo re

o re

o reo remove the batte

move the batte

move the battemove the batteries:

ries:

ries:ries:

1. Make sure the camera is turned off.

2. Hold the camera with the battery cover facing upward, and then open the battery cover.

3. Remove the batteries.

2.2 Inserting and removing an SD memory card

The DC C520 is equipped with 16 MB internal memory,

allowing you to record video clips and capture images. You

can also expand the memory capacity by using an optional

SD (Secure Digital) memory card to store more files.

1. Always make sure the camera is turned off before

inserting or removing a memory card.

2. Insert an SD memory card in the correct orientation as

shown in the illustration.

3. Close the battery / SD memory card cover.

To remove the SD memory card, make sure the camera

is turned off. Press lightly on the edge of the memory card and it will eject.

• Be sure to format the SD memory card with this

camera before the initial use.

• To prevent valuable data from being accidentally

erased from an SD memory card, you can slide the

write-protect tab (on the side of the SD memory

card) to “LOCK”.

• To save, edit, or erase data on an SD memory card,

you must unlock the card.

• SD memory card in the following sizes are supported: 8 MB, 16 MB, 32 MB, 64 MB, 128

MB, 256 MB, 512 MB, and 1 GB. The DC C520 is compatible with SD memory cards manu-

factured by Panasonic, Toshiba, and Sandisk. Please contact your local dealer for pur-

chase information.

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Using the DC C520 5

3.2 LCD monitor information (camera mode)

1. Mode indicator

[ A ] Auto Mode

[SET] Setup Mode

[ ] Video Mode

[ ] Landscape Mode

[ M ] Manual Mode

[ ] Sports Mode

[ ] Portrait Mode

[ ] Night Mode

2. Flash mode

[ ] Auto Flash (Default)

[ ] Red Eye

[ ] Forced Flash

[ ] No Flash

3. Self-timer mode

[ ] OFF

[ ] 2 sec. delay

[ ] 10 sec. delay

[ ] 10+2 sec. delay

4. Capture mode indicator

[ ] Single

[ ] Burst

[ ] AEB

5. EV (Exposure Value)

-0.3, -0.7, -1.0, -1.3,

-1.7, -2.0, +0.3, +0.7, +1.0,

+1.3, +1.7, +2.0

6. ISO

[ ] ISO Auto

[ ] ISO 50

[ ] ISO 100

[ ] ISO 200

7. Resolution

[ ] 2560 x 1920

[ ] 2048 x 1536

[ ] 1280 x 960

[ ] 640 x 480

8. Image Quality

[ ] Quality Fine

[ ] Quality Normal

[ ] Quality Economy

9. Possible number of shots

10. Effect

[ ] Effect Normal

[ ] B & W

[ ] Sepia

11. Focus indicator

[ ] Focus Auto

[ ] Macro

[ ] Infinity

12. White balance

[ ] Auto WB

[ ] Sunny

[ ] Cloudy

[ ] Sunset

[ ] Tungsten

[ ] Fluorescent

13. Metering

[ ] Center Average

[ ] Spot

14. Sharpness

[ ] Sharpness - Low

[ ] Sharpness - Medium

[ ] Sharpness - High

15. Saturation

[ ] Saturation - Low

[ ] Saturation -

Medium

[ ] Saturation - High

16. Remaining battery status

[ ] Full battery power

[ ] Medium battery

power

[ ] Low battery power

[ ] No battery power

17. AF area

18. Zoom status

10+2

10+210+2

BenQ DC 5530 User’s Manual

English

EnglishEnglish

Using the DC C5206

3.3 Getting started

3.3.1 Turning the power on / off

• Press the [ ] button until the digital camera turns on.

•To turn the power off, press the [ ] button again.

3.3.2 Choosing the screen language

When the camera is turned on for the first time, a language-selection screen will be displayed

on the LCD monitor. Follow the steps below to choose the desired language.

1. Rotate the mode dial to [SET] mode, and then press the [ ] button to turn on your

camera.

2. Press [ ] or [ ] to scroll to [Language] menu.

3. Press [ ] or [ ] to select the desired language.

4. Press the OK button to confirm.

3.3.3 Setting the date and time

Follow the steps below to set the current date and time.

1. Rotate the mode dial to [SET] mode, and then press the [ ] button to turn on your

camera.

2. Press [ ] or [ ] to scroll to [Date/Time] menu.

3. Press [ ] or [ ] to move to Year, Month, Day and Time fields.

• Move to the field that you would like to change, and then press the OK button.

•To increase a value of a field, press [ ].

•To decrease a value, press [ ].

• The time is displayed in 24 hour format.

4. Press the OK button after all fields are set.

• If you would like to change the date display style, press [ ] or [ ] to scroll to [Date

Format] menu in Setup Mode, and then select your preferred setting.

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Using the DC C520 7

3.3.4 Using the flash

The flash is designed to function automatically when lighting conditions warrant the use of

flash. You can capture an image using a flash mode suitable to your circumstances.

1. Rotate the mode dial to [A M], [ ], [ ], [ ], [ ] or [ ], and then press the

[ ] button to turn on your camera.

2. Toggle [ ] / [ ] until the desired flash mode appears on the LCD monitor.

3. Compose your scene and press the shutter button.

The camera has four flash modes: Auto Flash (default), Red Eye, Forced Flash and No Flash.

The table below will help you choose the appropriate flash mode.

• The flash cannot be used in Video Mode.

3.3.5 Using the self-timer

The self-timer can be used in situations such as group shots. When using this option, you

should either mount the camera on a tripod (recommended) or rest it on a flat surface.

1. Secure the camera to a tripod or place it on a stable surface.

2. Rotate the mode dial to [A M], [ ], [ ], [ ], [ ] or [ ], and then press the

[ ] button to turn on your camera.

3. Toggle [ ] / [ ] until the desired self-timer mode appears on the LCD monitor.

Icon

IconIcon Flas

Flas

FlasFlash mo

h mo

h moh mode

dede Des

Des

DesDescri

cri

cricript

ptption

ion

ionion

[ ] Auto flash The flash fires automatically according to the photographic conditions.

[ ] Red eye This mode can reduce the red-eye phenomenon when you want to capture

natural-looking images of people and animals in low-light conditions.

When capturing images, the red-eye phenomenon can be reduced by asking

the subject (person) to look at the camera lens or get as close to the camera

as possible.

[ ] Forced flash The flash will always fire regardless of the surrounding brightness. Select

this mode for capturing images with high contrast (backlighting) and deep

shadows.

[ ] No flash The flash will not fire. Select this mode in a place where flash photography

is prohibited, or when the distance to the subject is beyond the effective

range of the flash.

OFF 2 10 10+2

[No Indication]

BenQ DC 5530 User’s Manual

English

EnglishEnglish

Using the DC C5208

4. Compose your image and press the shutter button.

• The self-timer function is activated.

• The image is then captured after the preset time.

• To cancel the self-timer at any time, press the shutter

or [ ] button, switch the mode dial to another

mode or press [ ] to disrupt the sequence.

• After one shot is taken, the self-timer mode is turned off.

• If you wish to capture another image using the self-timer,

repeat these steps.

3.3.6 Using the zoom function

The camera is equipped with 3X optical zoom. The lens moves during the optical zoom

photography, allowing you to capture telephoto and wide-angle shots. By using the optical

zoom function, images appear closer by pressing T button, or smaller away by pressing the W

button.

Moreover, you can further enlarge the subjects with 4X digital zoom by pressing the T button

continuously. It is activated after your camera reaches its maximum optical zoom factor (3X).

A useful feature as it is, however, the more the image is magnified, the grainer the image may

become.

To capture a zoomed image, perform the following steps.

1. Press the [ ] button to turn on your camera.

2. Adjust the magnification ratio by using the T / W buttons.

• To access the optical zoom function, press the T button as far as it can go. Press it

again to activate the digital zoom.

• To exit the zoom photography, press the W button continuously.

• The status of digital magnification is displayed on the LCD monitor.

3. Compose your image and press the shutter button.

• The digital magnification ranges from 1.0X to 4.0X.

• The zoom function cannot be used while a video clip is being recorded. Set the zoom

before you start recording.

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Using the DC C520 9

3.3.7 Burst

This mode is used for continuous shooting. Pictures are taken continuously while the shutter

button is pressed.

1. Rotate the mode dial to [A M], [ ], [ ], [ ], [ ] or

[ ], and then press the [ ] button to turn on your

camera.

2. Press [ ], and then press [ ] or [ ] to scroll to

[Capture Mode] menu.

3. Press [ ] or [ ] to select [Burst], and then press the OK

button.

4. To exit from the menu, press the [ ] button.

The [ ] indicator is displayed on the LCD monitor.

5. Press the shutter button halfway to lock the focus.

6. Press the shutter button all the way down to shoot.

Shooting will stop when the shutter button is released.

• In Burst mode, the flash mode will be set to OFF automatically.

3.3.8 Auto exposure bracketing (AEB)

In this mode, the camera automatically changes the exposure within a set range to take three

shots after you press the shutter button once. AEB settings can be combined with exposure

compensation settings to extend the adjustment range.

1. Rotate the mode dial to [A M], [ ], [ ], [ ], [ ] or

[ ], and then press the [ ] button to turn on your

camera.

2. Press [ ], and then press [ ] or [ ] to scroll to

[Capture Mode] menu.

3. Press [ ] or [ ] to select [AEB], and then press the OK

button.

4. To exit from the menu, press the [ ] button.

The [ ] indicator is displayed on the LCD monitor.

5. Press the shutter button to shoot.

• In AEB mode, the flash mode will be set to OFF automatically.

BenQ DC 5530 User’s Manual

English

EnglishEnglish

Using the DC C52010

3.4 Menu options

3.4.1 Camera menu

This menu is for the basic settings to be used when capturing still images.

1. Rotate the mode dial to [A], [M], [ ], [ ], [ ] or

[ ], and then press the [ ] button to turn on your

camera.

2. Press [ ], and then press [ ] or [ ] to scroll to the

desired menu.

3. Press [ ] or [ ] to select the desired setting, and then

press the OK button.

4. To exit from the menu, press the [ ] button.

In [A] mode:

Item

ItemItem Fun

Fun

FunFunction

ction

ctionctional Desc

al Desc

al Descal Descripti

ripti

riptiription

onon

Resolution

[ ]

This option sets the size of the image that will be captured.

– [ ] 2560 x 1920

– [ ] 2048 x 1536

– [ ] 1280 x 960

– [ ] 640 x 480

Image Quality

[ ]

This option sets the quality (compression rate) at which the image will be captured.

– [ ] Quality Fine

– [ ] Quality Normal

– [ ] Quality Economy

Focus

[ ]

This option allows you to capture images with the distance to the subject set by auto focus,

macro or infinity.

– [ ] Focus Auto

– [ ] Macro

– [ ] Infinity

Capture Mode

[ ]

This option sets the capturing method at the time of taking pictures.

– [ ] Single

– [ ] Burst

– [ ] AEB

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Using the DC C520 11

In [P], [ ], [ ], [ ] or [ ] mode:

Item

ItemItem Fun

Fun

FunFunction

ction

ctionctional Descri

al Descri

al Descrial Descriptio

ptio

ptioption

Resolution

[ ]

Refer to the “In [A] mode:” on page 10.

Image Quality

[ ]

Refer to the “In [A] mode:” on page 10.

Sharpness

[ ]

This option sets the level of image sharpness.

– [ ] Sharpness - Low

– [ ] Sharpness - Medium

– [ ] Sharpness - High

Effect

[ ]

This option sets the color of the image that will be captured.

– [ ] Effect Normal

– [ ] B & W

– [ ] Sepia

Saturation

[ ]

To capture an image, your camera offers you three different degrees of color to match

with your preference.

Your images will demonstrate different impression by selecting different degrees of color.

This is called “Saturation”.

– [ ] Saturation - Low

– [ ] Saturation - Medium

– [ ] Saturation - High

Focus

[ ]

Refer to the “In [A] mode:” on page 10.

Capture Mode

[ ]

Refer to the “In [A] mode:” on page 10.

Metering

[ ]

You can select the metering mode that sets which part of the subject to measure to deter-

mine the exposure.

– [ ] Center Average

– [ ] Spot

EV Bias

[ ]

This option sets to obtain the correct exposure when the subject is much brighter or

darker than the background.

The EV compensation value can be set in the range from -2.0 EV to +2.0 EV.

BenQ DC 5530 User’s Manual

English

EnglishEnglish

Using the DC C52012

3.4.2 Video mode

3.4.2.1

3.4.2.13.4.2.1 LCD monit

LCD monit

LCD monitLCD monitor information (video mode)

or information (video mode)

or information (video mode)or information (video mode)

1. Video mode

2. Recordable movie time available

3. Battery power indicator

4. Focus area

5. Effect

3.4.2.2

3.4.2.23.4.2.2 Recordin

Recordin

RecordinRecording video clips

g video clips

g video clipsg video clips

This mode allows you to record video clips with sound via

built-in microphone.

1. Rotate the mode dial to [ ] mode, and then press the

[ ] button to turn on your camera.

2. To start recording, press the shutter button.

3. To stop recording, press the shutter button again.

• The zoom function of optical zoom (3X) can be activated

before you start to record video clips.

• Pressing the [ ] switches the LCD monitor display

mode. Press the [ ] button once to set the indicators OFF. Press the [ ] button

again to set the indicators ON.

White Balance

[ ]

This option sets the white balance photographing under a variety of lighting conditions

and permits photographs to be taken that approach the conditions that are seen by

human eye.

– [ ] Auto WB

– [ ] Sunny

– [ ] Cloudy

– [ ] Sunset

– [ ] Tungsten

– [ ] Fluorescent

ISO

[ ]

This option sets the sensitivity for capturing images. When the sensitivity is raised (and

the ISO figure is increased), photography will become possible even in dark locations, but

the more pixilated (grainer) the image will appear.

– [ ] ISO Auto

– [ ] ISO 50

– [ ] ISO 100

– [ ] ISO 200

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Using the DC C520 13

3.4.2.3

3.4.2.33.4.2.3 Video menu

Video menu

Video menuVideo menu

This menu is for the basic settings to be used when recording video clips.

1. Rotate the mode dial to [ ] mode, and then press the

[ ] button to turn on your camera.

2. Press the [ ] button to access Video Mode Menu.

3. Press [ ] or [ ] to select the desired setting, and then

press the OK button.

4. To exit from the Playback menu, press the [ ] button.

3.4.3 Playback mode

3.4.3.1

3.4.3.13.4.3.1 LCD monit

LCD monit

LCD monitLCD monitor information (image playback)

or information (image playback)

or information (image playback)or information (image playback)

1. Playback mode (image)

2. Resolution

3. Image Quality

4. Available number of files

5. Battery power indicator

6. Date

3.4.3.2

3.4.3.23.4.3.2 LCD monit

LCD monit

LCD monitLCD monitor information (video

or information (video

or information (video or information (video playback)

playback)

playback)playback)

1. Playback mode (video)

2. Available number of files

3. Playback navigator

4. Date

5. Battery power indicator

3.4.3.3

3.4.3.33.4.3.3 Playback mode -

Playback mode -

Playback mode -Playback mode - the basics

the basics

the basics the basics

3.4.3.3.1

3.4.3.3.13.4.3.3.1 Vie

Vie

VieView

wwing images

ing images

ing images ing images

You can display the still images you have just captured at a time.

1. Press the [ ] button to turn on your camera.

2. Press the [ ] button.

The last captured image appears on the LCD monitor.

3. Use [ ] / [ ] to select the desired images.

•To view the previous image, press the [ ] button.

•To view the next image, press the [ ] button.

Item

ItemItem Fun

Fun

FunFunction

ction

ctionctional Descrip

al Descrip

al Descripal Description

tion

tiontion

Effect

[ ]

Refer to “In [P], [ ], [ ], [ ] or [ ] mode on page 11.

BenQ DC 5530 User’s Manual

English

EnglishEnglish

Using the DC C52014

• If there is no image stored in the internal memory or on the memory card, [No Image]

message will appear on the monitor.

3.4.3.3.2

3.4.3.3.23.4.3.3.2 Magnifying images

Magnifying images

Magnifying imagesMagnifying images

While reviewing your images, you may enlarge a selected portion of an image. This

magnification allows you to view fine details. The zoom factor displayed on the screen shows

the current magnification ratio.

1. Press the [ ] button.

• The last captured image appears on the LCD monitor.

•To view the previous image, press the [ ] button.

•To view the next image, press the [ ] button.

2. Adjust the zoom ratio by using the Zoom [W] / [T]

button.

• To enlarge the selected image, press the [T] button.

• To return to the normal image, press the [W] button.

• The magnification factor is displayed on the LCD monitor.

3. To view different portion of the images, press the [ ] / [ ] / [ ] / [ ] button to

adjust the display area.

• The magnification factors range from 1x to 4x (within 7 stages: 1.0x, 1.5x, 2.0x, 2.5x, 3.0x,

3.5x and 4.0x).

3.4.3.3.3

3.4.3.3.33.4.3.3.3 Thumbnail displa

Thumbnail displa

Thumbnail displaThumbnail display

This function allows you to view 9 thumbnail images on the LCD monitor simultaneously so

you may search for a particular image.

1. Press the [ ] button.

The last captured image appears on the LCD monitor.

2. Press the [W] / [ ] button once.

• Nine thumbnail images are displayed simultaneously.

•For recorded video clips, the [ ] video mode icon

will be displayed.

3. Use the [ ] / [ ] / [ ] / [ ] button to select the

image to be displayed at regular size.

4. Press the OK button to display the selected image on full screen.

SDSD

112

223

445

556

778

889

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Using the DC C520 15

3.4.3.3.4

3.4.3.3.43.4.3.3.4 Slidesho

Slidesho

SlideshoSlideshow display

w display

w displayw display

The slide show function enables you to play your images back automatically in sequential

order. This is very useful and entertaining feature for reviewing captured images and for

presentations.

1. Press the [ ] button.

The last captured image appears on the LCD monitor.

2. Press the [ ] button, and then press [ ] or [ ] to

scroll to [Slideshow] menu.

3. Press [ ] or [ ] to select the playback interval, and then

press the OK button.

• The slide show starts.

• The video clips are displayed from the first frame image, and not played back.

• To stop slide show, press the OK button.

• You can adjust the slide show display interval within the range of 3 sec., 5 sec., 10 sec.

3.4.3.3.5

3.4.3.3.53.4.3.3.5 Resizing an image

Resizing an image

Resizing an imageResizing an image

You can change the resolution of a captured image to one of the following sizes: 2048 x 1536

pixels, 1280 x 960 pixels and 640 x 480 pixels.

1. Press the [ ] button.

The last captured image appears on the LCD monitor.

2. In [ ] mode, use [ ] or [ ] to select the desired

images.

•To view the previous image, press the [ ] button.

•To view the next image, press the [ ] button.

3. Press [ ] to access Playback menus, and then use [ ]

or [ ] to scroll to [Resize] menu.

4. Use [ ] or [ ] to select the desired setting, and then press the OK button to confirm.

3.4.3.4

3.4.3.43.4.3.4 Playback menu

Playback menu

Playback menuPlayback menu

In the [ ] menu, set which settings are to be used for

playback.

1. Press the [ ] button.

The last captured image appears on the LCD monitor.

2. Press the [ ] button, and then use [ ] or [ ] to

scroll to the desired menu.

3. Use [ ] or [ ] to select the desired setting, and then

press the OK button to confirm.

BenQ DC 5530 User’s Manual

English

EnglishEnglish

Using the DC C52016

4. To exit from the Playback menu, press the [ ] button.

Item

ItemItem Fun

Fun

FunFunction

ction

ctionctional Descrip

al Descrip

al Descripal Description

tion

tiontion

Delete

[ ]

This option allows you to delete one or all images you captured.

– [ ] Delete One

– [ ] Delete All

Slideshow

[ ]

You can play back captured images sequentially with a selected interval time. This func-

tion is useful for checking your images or for presentations. Refer to 3.4.3.3.4 “Slideshow

display” on page 15 for further details.

– [ ] Slideshow 3S

– [ ] Slideshow 5S

– [ ] Slideshow 10S

Protect

[ ]

This option sets the data to read-only to prevent images from being erased by mistake.

– [ ] Protect One

– [ ] Protect All

Quality

Reduce

[ ]

This option reduces the quality (compression rate) for the selected image.

– [ ] Quality Normal

– [ ] Quality Economy

Resize

[ ]

This option changes the size of a captured image.

– [ ] Resize to 3M

– [ ] Resize to 1M

– [ ] Resize to VGA

DPOF

[ ]

This option allows you to select the desired pictures to be printed and set the number of

prints and date displayed in DPOF format. You can print images easily just by inserting

the memory card to a DPOF compliant printer or a print shop.

– [ ] DPOF-One

– [ ] DPOF-All

– [ ] Reset DPOF

COPY TO

CARD

[ ]

This option allows you to copy your files from the digital camera’s internal memory to a

memory card. This action can be performed only if you have a memory card installed and

some files in the internal memory.

– [ ] YES

– [ ] NO

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

Using the DC C520 17

3.4.4 Setup mode

3.4.4.1

3.4.4.13.4.4.1 Setup menu

Setup menu

Setup menuSetup menu

This feature allows you to set up the default settings by preference for using your camera.

1. Rotate the mode dial to [SET] mode, and then press the

[ ] button to turn on your camera.

Setup Mode menu is displayed on the LCD monitor.

2. Press [ ] or [ ] to scroll to the desired menu.

3. Use [ ] or [ ] to select the desired setting, and then

press the OK button.

4. To exit from the setup menu, rotate the mode dial to other

desired mode again.

Item

ItemItem Fun

Fun

FunFunctio

ctio

ctioctional Des

nal Des

nal Desnal Descrip

crip

cripcription

tion

tiontion

System Sound

[ ]

This option sets whether the startup sound and the camera sound will be muted every

time when you press the camera buttons.

– [ ] Louder

– [ ] Soft

– [ ] Off

Power Save

[ ]

If no operation is performed for a specific period of time, the power to the camera is auto-

matically turned off. This feature is useful to reduce battery wear.

– [ ] 2 min.

– [ ] 3 min.

– [ ] 5 min.

– [ ] OFF

Digital Zoom

[ ]

This option sets whether the digital zoom will be activated at the time of photography.

– [ ] ON

– [ ] OFF

Reset to

Default

[ ]

This option returns all basic settings to the digital camera’s default settings. The time set-

ting will not be reset.

– [ ] YES

– [ ] NO

File no. Reset

[ ]

This option sets whether the file number when you take photographs will be reset. This

creates a new folder. The captured images are recorded to the newly created folder from

number 0001. If you want to reset the file number, be sure that no images are recorded in

the internal memory or the SD memory card.

– [ ] YES

– [ ] NO

BenQ DC 5530 User’s Manual

English

EnglishEnglish

Using the DC C52018

Date Stamp

[ ]

This option allows the date of recording to be printed directly on the still images. This

function must be activated before the image is captured.

– [ ] ON

– [ ] OFF

Format Inner

[ ]

This option erases all the images stored in the internal memory.

– [ ] YES

– [ ] NO

Format SD

[ ]

This option reformats the SD memory card loaded in your camera. Protected images are

also erased. The SD memory card cannot be formatted if its write-protect tab is slided to

“LOCK”.

– [ ] YES

– [ ] NO

Quick View

[ ]

This option allows you to display a photographed image on the LCD monitor immediately

after you have taken a shot.

– [ ] ON

– [ ] OFF

Date/Time

[ ]

This option sets the date and time. Refer to 3.3.3 “Setting the date and time” on page 6 for

further details.

– [ ] Year / Month / Date

– [ ] Date / Month / Year

– [ ] Month / Date / Year

Video Out

[ ]

This option sets the video output system of the video equipment that you are going to

connect to the camera.

– [ ] NTSC

– [ ] PAL

Language

[ ]

This option sets the language that is displayed on the LCD monitor. Refer to 3.3.2 “Choos-

ing the screen language” on page 6 for further details.

English / French / Germany / Spanish / Italian / Traditional Chinese / Simplified Chinese /

Portuguese / Russian

LCD Bright-

ness

[ ]

This option sets the brightness of the LCD monitor. The adjustment range is from -5 to

+5.

USB

[ ]

This option allows you to choose one of the following modes for further settings.

– [ ] PC

– [ ] Printer

BenQ DC 5530 User’s Manual

Eng

EngEnglish

lish

lishlish

PC DEPENDENT FEATURES 19

4PC DEPENDENT FEATURES

4.1 Bundled software

The DC C520 is supplied with the following software. To install the software, refer to the

information supplied with respective CDs.

4.2 Transferring files to your computer

After using USB cable to establish a USB connection between the camera and your computer,

you can use your computer to share captured images or recorded video clips with your family

or friends via e-mail or post them on the Web. Note that before you begin to install the

software, you need to check your system according to the table as shown below.

Ulead Photo

Ulead Photo Ulead Photo

Expr

ExprExpress

ess

essess

Ulead® Photo Express™ 5.0 SE is a complete photo project software

for digital images. Acquire photos effortlessly from digital cameras

or scanners. Edit and enhance images using easy-to-use editing tools

and cool photographic filters and effects. Assemble creative photo

projects and share results via e-mail and multiple print options.

Ulead Photo

Ulead Photo Ulead Photo

Expl

ExplExplorer

orer

orerorer

Ulead® Photo Explorer™ 8.0 SE Basic provides an efficient way to

transfer, browse, modify and distribute digital media. It is an all-in-

one tool for owners of digital cameras, webcams, DV camcorders,

scanners, or for anyone who strives to effectively handle digital

media.

System R

System RSystem Requirements (W

equirements (W

equirements (Wequirements (Windows)

indows)

indows)indows)

CPU

CPUCPU Pentium III 600 MHz processor or higher

Ope

OpeOperat

rat

ratratin

ining Sy

g Sy

g Syg System

stem

stemstem Windows ME / 2000 / XP

RAM

RAMRAM 32 MB

(64 MB RAM recommended)

Har

HarHard Disk Spac

d Disk Spac

d Disk Spacd Disk Space

ee 128 MB hard disk space

Required

RequiredRequired Devices

Devices

Devices Devices A CD-ROM drive

An available USB port

Displ

DisplDisplay

ayay Color Monitor (800 x 600, 24-bit or higher recommended)

Produkt Specifikationer

Mærke:	BenQ
Kategori:	Kamera
Model:	DC C520

Har du brug for hjælp?

Hvis du har brug for hjælp til BenQ DC C520 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera BenQ Manualer

16 August 2024

12 August 2024

11 August 2024

9 August 2024

BenQ 9H.A1Y01.6AA Manual

5 August 2024

BenQ AE100 Manual

3 August 2024

BenQ 9H.A1Y01.9AA Manual

1 August 2024

BenQ DC C510 Manual

1 August 2024

BenQ DC C610 Manual

30 Juli 2024

BenQ E1480 Manual

29 Juli 2024

Kamera Manualer

Nyeste Kamera Manualer

IMILAB C22 Manual

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025

Aida HD-NDI-X20 Manual

27 Marts 2025

Marshall Electronics CV228 Manual

12 Marts 2025

AViPAS AV-1180 Manual

12 Marts 2025

Fujifilm FinePix JX500 Manual

14 Januar 2025

Canon WFT-E9 Manual

13 Januar 2025