
TURBO LITE 
PLUS TENT
www.blackwolf.com.au 
Congratulations on choosing a BlackWolf Turbo 
tent, please read through this instruction booklet 
thoroughly before using your new tent.
BEFORE YOUR FIRST CAMPING TRIP
We strongly recommend you pitch your tent before 
you take it away for the first time to familiarise 
yourself with the process and to double check that 
all the components are included.
We recommend you weather your tent by hosing it 
thoroughly, the stitching in the bound seams will 
swell and this will help seal the stitching holes. 
Please note and fully understand that no tent can be 
guaranteed 100% waterproof. Whilst the fabric your 
tent is made from is waterproof in certain weather 
conditions such as strong wind and driven rain can 
cause some leakage through seams and zippers.
USING YOUR TENT
Always peg out all guy ropes at all times. In cool 
weather or high humidity condensation can form 
inside your tent. This is not coming through the 
fabric but is water vapour that is inside the tent 
(created when you breathe and perspire and also 
from evaporation o wet items inside your tent). 
The best way to minimise condensation is to 
maximise ventilation by opening gusseted 
windows, vents and doors to allow air to flow 
through.
AFTER USE CARE
Where possible clean and dry your tent before 
packing it away, if the weather is bad and you have 
to pack your tent wet it is important to get it out and 
thoroughly dry it as soon as possible. NEVER store 
your tent wet, mildew can form on the fabric, pegs 
and other components can corrode. After coastal 
camping trips it is a good idea to rinse your gear in 
fresh water.
Store your tent in a dry, well ventilated place.
COMPONENT LIST
1 x Turbo Lite Plus tent with frame attached
1 x Turbo Lite Plus fly
11 x Guy ropes (already attached to your tent and 
packed in fin pockets)
6 x Loose guy ropes for windows
3 x Awning poles & 1 x Awning ridge pole
1 x U-pole (2 x 2 segments, 2 curved poles) 
28 x steel pegs in peg bag
1 x Turbo tent bag