Blaupunkt KPT-R1 Manual

Blaupunkt Radio KPT-R1

Læs gratis den danske manual til Blaupunkt KPT-R1 (14 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Blaupunkt KPT-R1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/14
MANUAL KPT-R1
EN Wireless Remote Keypad with Proximity Tags (KPT-R1) 2
DE Funk-Bedienteil mit Tag-Reader (KPT- R1) 4
ES Teclado Remoto Inalámbrico con Tags (KPT-R1) 6
FR Clavier déporté sans fil avec lecteur de badges RFID (KPT-R1) 8
IT Tastiera Remota Wireless con Tag di prossimità (KPT-R1) 10
NL Draadloos Keypad met Tag (KPT-R1) 12
2
EN Wireless Remote Keypad with Proximity Tags (KPT-R1)
Parts Description
1. Active LED (Blue/Orange)
2. Status LED (Blue/Red)
3. Fault LED (Orange)
4. Away Arm Key
5. Home Arm Switch
6. Status Key
7. Disarm Key
8. Panic Alarm
Press both 1 and 3 key to trigger Panic alarm
9. Fire Alarm
Press both 4 and 6 key to trigger Fire alarm
10. Emergency Alarm
Press both 7 and 9 key to trigger Emergency alarm
11. Battery Insulator
12. Mounting Knockouts
13. Tamper Switch
The Tamper switch protects the PIR from unauthorized cover opening.
14. RFID TAG
Package Content
1 x Remote Keypad
2 x wall plugs and screws
2 x RFID Tags
1 x 3V lithium batteries (pre-installed)
1. Learning
For learning the Remote Keypad:
1. Put the Control Panel into learning mode.
2. Press both # and * keys to transmit learn code
3. Refer to Control Manual to complete the learning process.
2. Installation
The Remote Keypad has 2 knockouts on the back
where plastic is thinner for wall mounting.
1. Use the two knockouts on the back to mark
position on the wall at chest height. Open the back
cover.
2. Drill holes into the wall using the knockouts as
template.
3. Fix the keypad base onto the wall with the screw
and plugs provided.
4. Replace the keypad cover onto the base.
3. Operation
Standby Mode
The Remote Keypad features a power saving feature. When no key is pressed
for 5 seconds, the Remote Keypad will turn off automatically to conserve
power. When any key is pressed, the Remote Keypad will wake up and turn on
Active LED to indicate it is now under normal operation.
NOTE: This device works with a genuine Rolling
Code encryption. Please only use it with a control
panel with Rolling Code, otherwise won’t be
possible to pair the device.
Keypad Settings
The Remote Keypad features a Test (programming) mode for you to customize
its setting. Before you start using the Remote Keypad, you should first finish
configuration setting.
The Remote Keypad also feature a Keypad PIN code which is used to access the
Test mode, To enter Test Mode, Enter “0000”(Default Keypad PIN code) + “*” key,
the Active Orange LED will light up.
RFID TAG Management
The Keypad can function with the RFID tags included in the package. By
assigning User PIN Code to a Tag, you can use the Tag to Arm/Home/Disarm the
Control Panel with a simple swipe.
Up to 6 tags can be stored in the Keypad and assigned to User PIN Codes for
panel control:
Under Test Mode, the following functions include:
Key Function
“*” + “1” Tag Management
“*” + “7” Transmit learn code (same as pressing
both # and * keys under normal mode)
“*” + “2” Enable dual key Panic Alarm function
“*” + “3” Enable dual key Fire Alarm function
“*” + “4” Enable dual key Medical Alarm function
“*” + “5” Disable all dual key functions
“*” + “6” Change Keypad PIN Code:
1. Enter old code + “Status” Key
2. Enter new 4-digit code + “#” key
“*” + “8” Enable Arming without Use PIN code
function
“*” + “9” Enable Arm with User PIN code function
(Default)
“*” + “0” Enable Arming with KP PIN code function
“Disarm” twice To leave Test Mode
Add New Tag:
1. Enter Keypad Test Mode.
2. Enter “*”+“1” for Tag Management. Red Status LED will light up.
3. Enter a 4-digit “Control Panel User PIN Code” + “#” key.
Status RED LED flashes Success
Status Blue LED flashes with 4 beeps Error: Wrong PIN Code length
Status Red LED flashes with 4 beep Error: Keypad already stored 6 Tags
4. Put the TAG close to the Keypad when Status Red LED is flashing.
Status RED LED On with 2 beeps Success
Status Red LED On with 1 bee Same PIN Code already assigned to
this Tag
Status Red LED On with 4 beeps Error: Tag already assigned to ano-
ther User PIN Code
5. After finish adding new Tag, press “Disarm” key to exit Tag Management.
Remove Existing Tag:
1. Enter Keypad Test Mode.
2. Enter “*”+“1” for Tag Management. Red Status LED will light up.
3. Enter the User PIN Code of the Tag you want to remove, then press the
Status key.
4. The Keypad will emit a long beep, the Tag info is removed.
Mounting
Knockouts
x 2

Produkt Specifikationer

Mærke: Blaupunkt
Kategori: Radio
Model: KPT-R1
Produktfarve: Black, White
Antal: 1
Forbindelsesteknologi: Trådløs
Kapabilitet: SA2900 & Q

Har du brug for hjælp?

Hvis du har brug for hjælp til Blaupunkt KPT-R1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Radio Blaupunkt Manualer

Blaupunkt

Blaupunkt BR-90DABi Manual

28 Juli 2025
Blaupunkt

Blaupunkt HR7BR Manual

15 September 2024
Blaupunkt

Blaupunkt BCR-9DABi Manual

14 September 2024
Blaupunkt

Blaupunkt RX 18-1 Manual

11 September 2024
Blaupunkt

Blaupunkt IR plus 40 Manual

1 September 2024
Blaupunkt

Blaupunkt BD-320 Manual

21 August 2024
Blaupunkt

Blaupunkt PP12BK Manual

12 August 2024
Blaupunkt

Blaupunkt BR-70DABB Manual

4 August 2024
Blaupunkt

Blaupunkt BWR-401 Manual

30 Juli 2024
Blaupunkt

Blaupunkt KC BT 25 Manual

30 Juli 2024

Radio Manualer

Nyeste Radio Manualer

ECG

ECG CDR 990 Manual

30 Juli 2025
TechniSat

TechniSat DIGITRADIO 10 Manual

28 Juli 2025
JVC

JVC RA-E313B-DAB Manual

27 Juli 2025
Uniden

Uniden BearTracker 885 Manual

27 Juli 2025
TechniSat

TechniSat DigitRadio 574 IR Manual

27 Juli 2025
TechniSat

TechniSat Classic 200 Manual

27 Juli 2025
Lenco

Lenco PDR-016 Manual

26 Juli 2025
Lenco

Lenco DIR-270 Manual

25 Juli 2025
Lenco

Lenco MPR-035 Manual

25 Juli 2025
Lenco

Lenco PDR-060WD Manual

25 Juli 2025