2
Thanks for choosing
Velocity!
Congratulations on your purchase of your new
Velocity
product! We have invested tremendous effort
in the de-sign process of the new
Velocity
subwoofer series, in order to achieve superior musical
performance.
For maximum performance and reliability we highly recommend that your new
Velocity
subwoofers
be installed by an authorised Velocity dealer. By using our
Velocity
line component speakers and
amplifiers you can be as-sured of making the best out of your high-quality audio hi-fi system without
spoiling the sound by using com-ponents of inferior quality.
For additional information on the
Velocity
Product Line (technical data, user notes and soon also a
simulation programme for subwoofer housings) visit our Internet site at: http://www.velocity.de.
NEW COMPONENT FEATURES
High Power handling
Incredibly flexible installation: The new
Velocity
subwoofers perform well in sealed, vented and
bandpass boxes.
Due to the low resonance values, the new
Velocity
subwoofers also work well in infinite baffle
installations in which the woofer is mounted on the rear deck, using the trunk of the car for its acoustical
enclosure.
New ultra-linear long-throw suspension.
Corrugated mica polypropylene design yields tremendous rigidity.
Additional loudness is achieved through longer cone travel, so we designed the
Velocity
subwoofers-
with 6 to 9 mm peak-to-peak excursion.
The new reinforced spider renders spider tears a thing of the past.
Butyl rubber surrounds offer linear cone movement without compression or the risk of tearing from
over-excursion even for longer cone travel.
New strontium ceramic ferrite magnets yield smaller magnet sizes without reduced magnet strength
but retain their magnet power far beyond the expected life of the woofer.
Four layers of high-temperature wire on DuPont Kapton Polyamide voice coil bobbins allow for voice
coil temperatures exceeding nearly 225 degrees Celsius without damage.
Rear vented T-yokes allow fresh air to move in from behind the woofer to cool the voice coil.
Safety precautions
Before starting to mount your speakers, please read carefully the instructions on installation and
connection.
Disconnect the negative terminal of the battery before carrying out installation and connection work.
Observe the vehicle manufacturer’s safety instructions (regarding airbags, alarm systems, trip
computers, vehicle immobilisers).
When drilling holes, take care to avoid damage to vehicle components (battery, cables, fuse boxes).
Do not mount the subwoofer onto flexible rear decks (hatchback vehicles) or anywhere where they may
fall for-ward.
