BlendMount BMG-3030 Manual


Læs gratis den danske manual til BlendMount BMG-3030 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om BlendMount BMG-3030, eller vil du spørge andre brugere om produktet?

Side 1/2
Blend
fflounf-®
Innovative
Mounting
Solutions
ESCORT
LEFT
HAND
DRIVE VEHICLE
INSTALLATION INSTRUCTIONS FOR ESCORT IX, REDLINE EX, AND 360C RADAR DETECTORS
Your rear view
mirror
has minimal clearance between the back side
of
the
mirror
and the
mirror
tem. It
is
very important
that
this
mount is installed correctly
to
ensure
mirror
adjustability
is
retained.
PLEASE
READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING THIS MOUNT
NOTE: For illustration purposes, the mount and rear view
mirror
shown In these Instructions may
look
slightly different then
YOUR
mount and rear view mirror.
ALUMINUM
THREADED
INSERT
3 - Install
aluminum
threaded
insert into magnet,
and
attach
magnet
onto
blendmount
with lip
pointed in direction
as
shown
.
1 -
The
magnet
must
be removed from the suction
cup
mount
that
the
radar
detector
came
with.
UNSCREW
HERE
2 -
Unscrew
and
remove bolt,
only
the
magnetic
piece
is
used
with
the
blendmount.
TOP
~f-:~
~
--
SECTION
CLAMP
SCREW
4 - The Body Assembly must be removed to gain access to the CLAMP SCREW.
Remove the two socket head screws as shown above. Be sure to remove the lock
washer with the top screw along with the lock washer and flat washer with the
bottom screw. Loosen the Clamp Screw so there is enough clearance between
the TOP and MID SECTIONS to slide over the mirror stem.
PAGE 1
Of
2


Produkt Specifikationer

Mærke: BlendMount
Kategori: Ikke kategoriseret
Model: BMG-3030

Har du brug for hjælp?

Hvis du har brug for hjælp til BlendMount BMG-3030 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret BlendMount Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer