Blustream CMX42AB Manual

Blustream Router CMX42AB

Læs gratis den danske manual til Blustream CMX42AB (9 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Blustream CMX42AB, eller vil du spørge andre brugere om produktet?

Side 1/9
CMX42AB USER MANUAL
01
contact support@blustream.co.uk / support@blustream.com.au
User Manual
CMX42AB
Our Contractor CMX42AB 4K HDMI matrix features HDMI 2.0 chipsets with HDCP 2.2 support, allowing
distribution of four HDMI sources to two displays. This enables all sources to be viewed seamlessly as
required within a matrix configuration. The unit transmits all HDMI resolutions up to and including 4K 60Hz
4:4:4/HDR. The 4-Way matrix also includes audio breakout and EDID management.
Introduction
Key Features:
Features 4x HDMI inputs which can be independently routed up to two HDMI outputs
Supports 4K UHD video (up to 4K @60Hz 4:4:4/HDR)
Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and
DTS-HD Master Audio transmission
HDMI audio breakout to associated output analogue L/R audio and coaxial digital outputs concurrently
IR routing
Supplied with Blustream 5V IR receivers and emitters
Control via front panel, IR and RS-232
3rd Party drivers available for all major home control brands
Advanced EDID management
HDCP 2.2 compliant
CMX42AB USER MANUAL
02 www.blustream.co.uk
Panel Description
Front Panel:
IR receiver window for matrix control
Power LED indicator
HDMI output selection buttons 1-2. Press to scroll through source inputs per HDMI output
1
2
3
1 2
Rear Panel:
The EDID configuration can be altered using the
dip-switches located on the rear panel of the
matrix.
Please see adjacent table for EDID settings.
Note: You must power-cycle the HDMI switcher
aer changes have been made in order for the EDID
settings to update.
Adjusting The EDID Settings
EDID Dip-switches
[DIP]=0000: HDMI 1080p@60Hz, Audio 2ch PCM
[DIP]=0001: HDMI 1080p@60Hz, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=0010: HDMI 1080p@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=0011: HDMI 1080i@60Hz, Audio 2ch PCM
[DIP]=0100: HDMI 1080i@60Hz, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=0101: HDMI 1080i@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=0110: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 2ch PCM
[DIP]=0111: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=1000: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=1001: HDMI 4K@60Hz 4:4:4, Audio 2ch PCM
[DIP]=1010: HDMI 4K@60Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=1011: HDMI 4K@60Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=1100: DVI 1280x1024@60Hz, Audio None
[DIP]=1101: DVI 1920x1080@60Hz, Audio None
[DIP]=1110: DVI 1920x1200@60Hz, Audio None
[DIP]=1111: Soware Control EDID
EDID Dip-switches
3
14139 10 12
8
4
11
6 7
5
IR output - 3.5mm mono jack provides routed IR emitter
output for discrete control of sources
IR input - 3.5mm stereo jack provides zone specific
routed IR receiver input
Coaxial digital audio output - RCA (SPDIF)
Analog L/R audio output - 3.5mm stereo audio jack,
Supports 2 channel PCM only
Power on/o switch
EDID DIP switch - Used to manage the video and audio
resolution output by the connected source device.
HDMI inputs - connect to HDMI source devices
HDMI outputs - connect to HDMI display devices
RS-232 Serial port - For control of switcher by third party
control devices
IR control - IR input for switcher control. Connect 5V Blus-
tream IR receiver
Power port - Use included 12V/2A DC power adaptor
4
7
9
510
11
6
8
12
13
14


Produkt Specifikationer

Mærke: Blustream
Kategori: Router
Model: CMX42AB

Har du brug for hjælp?

Hvis du har brug for hjælp til Blustream CMX42AB stil et spørgsmål nedenfor, og andre brugere vil svare dig