Britax-Römer Dualfix 2 R Manual

Britax-Römer Bilsæde Dualfix 2 R

Læs gratis den danske manual til Britax-Römer Dualfix 2 R (4 sider) i kategorien Bilsæde. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Britax-Römer Dualfix 2 R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

09 10

01 02

Please observe the instructions on the use of child restraint systems de-

scribed in your vehicle owner’s manual.

The seat may be used in all vehicles equipped with the ISOFIX anchoring

systems. Please consult your vehicle owner’s manual for information the

seats which are approved for child safety seats in the weight class 0-18 kg.

The fastening with ISOFIX and support leg is based on semiuniversal

approval. The seat may be used only in those vehicles cited in the enclosed

vehicle type list. This type list is constantly updated. The latest version can

be obtained from us or from www.britax-roemer.com.

You can use your child car seat as follows:

USE IN THE VEHICLE

Shoulder pads

Harness buckle

Headrest

Cover

ISOFIX insert guides

ISOFIX attachement points (car) Shoulder straps

ISOFIX indicators

Recline button

Adjustment strap

Adjusting button Release button

Fabric loop

Locking arms

Support leg

Support leg indicator

Rotation button

Adjustment buttons

To ensure the full protective effect of the child safety seat:

• In the event of an accident with an impact speed above 10 km/h it is possible

that the child safety seat may have been damaged, but that the damage may

not be immediately obvious. In this case the child safety seat must be replaced.

Please dispose of it properly.

• Regularly check all important parts for damage. Make sure that the mechanical

components in particular are all in perfect working order.

• To prevent damage, ensure that the child safety seat does not become jammed

between hard objects (car door, seat runners etc.).

• Always have the child safety seat checked if it has been damaged (e.g. if it is

dropped).

• Never lubricate or oil parts of the child seat.

• In order to properly protect your child, it is imperative that you install and use

the DUALFIX² R exactly as described in this manual.

Please observe the waste disposal regulations in your

country.

Disposal of packaging Container for cardboard

Cover Residual waste, thermal utilisation

Plastic parts In accordance with the labelling in the

designated container

Metal parts Container for metals

Harness straps Container for polyester

Buckle &latch Residual waste

CARE INSTRUCTIONS

1) In the direction of travel 9-18 kg / Against the direction of travel 0-18 kg

2) In the direction of travel 9-18 kg: if there is a front airbag: Slide the passenger

seat a long way back and refer to any instructions in vehicle owner’s manual.

Against the direction of travel 0-18 kg: DO NOT use on a passenger seat with a front

airbag!

0–18 kg

9–18 kg

In the direction of travel Yes 1)

Against the direction of travel Yes 1)

With 2 point or 3 point vehicle belt No

On seats featuring:

ISOFIX attachments (between seat surface and backrest) Yes 2)

(Please observe the applicable regulations in your country)

BRITAX RÖMER

child safety seat

Tested and certied ac-

cording to ECE* R 44/04

Group Body weight

DUALFIX² R 0+ & 1 0 to 18 kg

• -The child safety seat has been designed, tested and certied according to the requirements of the Euro

pean Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certica-

tion number are located on the orange certication sticker (sticker on the child safety seat).

• This certication will be invalidated if you make any modications to the child safety seat.

• The DUALFIX² R child safety seat must only be used to secure your child in the vehicle. It must never be

used as a seat or toy in the home.

• Risk of injury due to unauthorised modications! Unauthorised technical modications may reduce or

entirely void the seat´s protective properties. Do NOT make any technical modications to the child seat.

• Use the child seat only as described in the user instructions.

*ECE = European Standard for Child safety Equipment

Storage compartment

DUALFIX² R base

User instructions GB

0–18 kg

9–18 kg

0~4 y

DUALFIX² R

www.britax-roemer.com

2000032107

19/02

CARE AND MAINTENANCEPRODUCT OVERVIEW

Care for the harness buckle

It is vital for the safety of your child that the harness buckle works correctly.

Malfunctions of the harness buckle are usually caused by accumulations of dirt or

foreign bodies. Malfunctions are as follows:

• The buckle latches are ejected only slowly when the red release button is

pressed.

• The buckle latches will no longer lock home (i.e. they are ejected again if you

try to push them in).

• The buckle latches engage without an audible „click“.

• The buckle latches are difcult to insert (you feel resistance).

• The buckle only opens if extreme force is applied.

Remedy

Wash out the harness buckle so that it functions properly once again.

Cleaning the cover

Please be sure to use only genuine BRITAX RÖMER replacement seat covers,

as the seat cover is an integral part of the child safety seat which plays an

important role in ensuring that the system works properly. Replacement seat

covers are available from your retailer.

• The child seat must not be used without its cover.

• The cover can be removed and washed with a mild detergent using the

washing machine‘s cycle for delicate items (30 °C). Please observe the

instructions on the washing label of the cover.

• The plastic parts can be cleaned using soapy water. Do not use harsh

cleaning agents (such as solvents).

• The harnesses can be washed in lukewarm soapy water.

• The shoulder pads can be washed in lukewarm soapy water.

CAUTION! Never remove the buckle latches 21 from the straps.

CAUTION! The child seat must not be used without the seat cover.

Removing the cover

1. Grasp the recline button

and move the seat shell 26 downwards into the

upright position.

2. Loosen the harness straps as far as possible.

3. Open the harness buckle 07 (press the red button).

4. Slide the headrest 04 to its lowest position.

5. Remove the cover of the headrest 04 .

6. Open the poppers on the left and right of the rear part of the cover.

7. Unhook the elastic seam of the cover under the edge of the seat shell.

TIP: Start at the handles on the side and at the upper edge of the seat shell.

8. Pull the cover up and over the bezel of the strap adjuster.

9. Feed out the harness buckle 07 and the end of the strap from the cover.

10. Pull the cover upwards a little and then put it with the cutout over the headrest

04 .

Retting the Cover:

Simply follow the steps in the opposite order.

CAUTION! Check that the harness straps are not twisted and that they have

been correctly inserted in the belt slots on the cover.

Removing the shoulder pads:

28 32

1. Loosen the 5-point harness of the child seat as much as possible. Unhook the

shoulder straps 06 on the backside of the childseat from the

connecting piece 28 .

2. Pull below both, the shoulder pads 05 and the two shoulder straps 06 to the

front through the slots 29 . (Frontside of the childseat)

3. Slide the belt loops 32 off of the plastic extensions 30 of the shoulder belt

height adjuster 31.

4. Pull the shoulder pads 05 through the slots 29 to the front.

5. Remove the shoulder pads 05 from the shoulder straps 06 .

Retting the shoulder pads:

Simply follow the steps in the opposite order.

Never use the child seat without correct installed shoulder pads. CAUTION!

EASY ACCESS FUNCTION

When used in rearward facing mode:

Group 0+ (0-13 kg)

Group 1 (9-18 kg)

1.Press the grey rotation button 20 and

turn the seat 90° into the Easy Access

mode

CAUTION! Before every journey:

make sure that the rotating part of the

child seat is fully engaged by making

sure the child seat is in a xed position.

When used in forward facing mode:

Group 1 (9-18 kg)

1. Press the grey rotation button 20

and turn the seat 90° into the Easy

Access mode

CAUTION! Before every journey:

make sure that the rotating part of the

child seat is fully engaged by making

sure the child seat is in a xed position.

The DUALFIX² R 360° seat rotation which makes it easier to get your child into or

out of the child seat (Easy Access Function).

Produkt Specifikationer

Mærke:	Britax-Römer
Kategori:	Bilsæde
Model:	Dualfix 2 R
Bredde:	450 mm
Dybde:	700 mm
Højde:	530 mm
Vægt:	14000 g
Produktfarve:	Black,Grey
Monteringstype:	ISOFIX
type af sikkerhedssele:	5-punkt
Justerbar ryglæn:	Ja
Maksimal vægtkapacitet:	18 kg
Drejelig vinkel:	360 °
Mindste vægt kapacitet:	0 kg
Gruppe:	0+/1 (0 - 18 kg; 0 - 4 år)
Nakkestøtte:	Ja
Drejefod:	Ja