Britax-Römer Max-Fix Manual

Britax-Römer Bilsæde Max-Fix

Læs gratis den danske manual til Britax-Römer Max-Fix (2 sider) i kategorien Bilsæde. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Britax-Römer Max-Fix, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

01 02

13 19

CARE AND MAINTENANCE Please observe the instructions on the use of child restraint systems described

in your vehicle owner’s manual.

The seat may be used in all vehicles equipped with the ISOFIX anchoring

systems. Please consult your vehicle owner’s manual for information the seats

which are approved for child safety seats in the weight class 0-18 kg.

The fastening with ISOFIX and support leg is based on semiuniversal approval.

The seat may be used only in those vehicles cited in the enclosed vehicle type

list. This type list is constantly updated. The latest version can be obtained from

us or from www.britax.eu / www.roemer.eu.

You can use your child car seat as follows:

NEXT CHILD SAFETY SEATS

USE IN THE VEHICLE

PRODUCT OVERVIEW

Shoulder pads

Harness buckle

Headrest

Cover

ISOFIX insert guides

ISOFIX attachement points (car) Shoulder straps

ISOFIX indicators

Recline wheel

Adjustment strap

Adjusting button Release button

Fabric loop

Locking arms

Support leg

Support leg indicator

Adjustment buttons

TWO-YEAR WARRANTY

For this child safety seat we offer a 2-year warranty against manufacturing or

material defects. The warranty period is effective from the day of purchase.

The warranty covers only child safety seats which have been handled properly

and which have been sent to us in a clean and proper condition.

The Warranty does not cover:

• natural signs of wear and damage resulting from excessive stress

• damage resulting from inappropriate or improper use

What is covered by the warranty?

Fabrics: All of our fabrics meet very high requirements with regard to colour

fastness when exposed to UV radiation. Nevertheless, all fabrics fade when

exposed to UV radiation. This is not a material defect, but rather a normal sign

of wear which is not covered by the warranty.

Buckle: Buckle malfunctions are often due to accumulations of dirt or foreign

bodies which may stop the buckle from working properly. If this happens, the

buckle can be cleaned, olease follow the procedure described in your user

instructions.

Please contact your retailer immediately in the event of a warranty claim. He or

she will give you the advice and support you need. When processing claims,

product-specic depreciation rates will be applied. Please refer to our General

Terms and Conditions which are available from your retailer.

Use, care and maintenance

The child safety seat must be used in accordance with the user instructions.

We point out expressly that only genuine accessories and replacement parts

must be used.

To ensure the full protective effect of the child safety

seat:

• In the event of an accident with an impact speed above 10

km/h it is possible that the child safety seat may have been

damaged, but that the damage may not be immediately obvi

ous. In this case the child safety seat must be replaced.

Please dispose of it properly.

• Regularly check all important parts for damage. Make sure

that the mechanical components in particular are all in per-

fect working order.

• To prevent damage, ensure that the child safety seat does

not become jammed between hard objects (car door, seat

runners etc.).

• Always have the child safety seat checked if it has been

damaged (e.g. if it is dropped).

• Never lubricate or oil parts of the child seat.

• In order to properly protect your child, it is imperative that

you install and use the MAX-FIX exactly as described in this

manual.

Please observe the waste disposal regulations in your country.

CARE INSTRUCTIONS

Disposal of packaging Container for cardboard

Cover Residual waste, thermal utilisation

Plastic parts In accordance with the labelling in the

designated container

Metal parts Container for metals

Harness straps Container for polyester

Buckle &latch Residual waste

In the direction of travel No

On seats featuring:

ISOFIX attachments (between seat surface and

backrest)

Yes 1)

1) If there is a front airbag: Slide the passenger seat a long way back and refer to any

instructions in vehicle owner’s manual.

(Please observe the applicable regulations in your country)

BRITAX RÖMER

child safety seat

Tested and certied ac-

cording to ECE* R 44/04

Group Body weight

MAX-FIX 0+ & 1 0 to 18 kg

• -The child safety seat has been designed, tested and certied according to the requirements of the Euro

pean Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certica-

tion number are located on the orange certication sticker (sticker on the child safety seat).

• This certication will be invalidated if you make any modications to the child safety seat.

• The MAX-FIX child safety seat must only be used to secure your child in the vehicle. It must never be

used as a seat or toy in the home.

• Risk of injury due to unauthorised modications! Unauthorised technical modications may reduce or

entirely void the seat´s protective properties.

- Do NOT make any technical modications to the baby seat.

- Use the baby seat only as described in the user instructions.

*ECE = European Standard for Child safety Equipment

Care for the harness buckle

It is vital for the safety of your child that the harness buckle works correctly.

Malfunctions of the harness buckle are usually caused by accumulations of dirt

or foreign bodies. Malfunctions are as follows:

• The buckle latches are ejected only slowly when the red release button is

pressed.

• The buckle latches will no longer lock home (i.e. they are ejected again if you

try to push them in).

• The buckle latches engage without an audible „click“.

• The buckle latches are difcult to insert (you feel resistance).

• The buckle only opens if extreme force is applied.

Remedy

wash out the harness buckle so that it functions properly once again:

Cleaning the harness buckle

1. Open the harness buckle 07 (press the red button).

2.Turn the recline wheel

and move the seat shell 26 upwards into the most

reclined position.

3. Grasp under the seat shell 26 and slide the metal plate 24 which is used to

fasten the harness buckle 07 to the seat shell up on its edge through the

strap slot 25 .

4. Soak the harness buckle 07 in warm water with dishwashing liquid for at

least an hour. Then rinse and dry it thoroughly.

Cleaning the cover

Please be sure to use only genuine Britax/RÖMER replacement seat covers,

as the seat cover is an integral part of the child safety seat which plays an

important role in ensuring that the system works properly. Replacement

seat covers are available from your retailer.

• The child seat must not be used without its cover.

• The cover can be removed and washed with a mild detergent using the

washing machine‘s cycle for delicate items (30 °C). Please observe the

instructions on the washing label of the cover.

• The plastic parts can be cleaned using soapy water. Do not use harsh

cleaning agents (such as solvents).

• The harnesses can be washed in lukewarm soapy water.

• The shoulder pads can be washed in lukewarm soapy water.

Caution: Never remove the buckle latches 21 from the straps.

Caution: The child seat must not be used without the seat cover.

Removing the cover

1. Turn the recline wheel

and move the seat shell 26 downwards into the

upright position.

2. Loosen the harness straps as far as possible.

3. Open the harness buckle 07 (press the red button).

4. Slide the headrest 04 to its lowest position.

6. Remove the cover of the headrest 04.

7. Open the poppers on the left and right of the rear part of the cover.

8. Fold the rear part of the cover onto the seat surface.

9. Thread the harness straps through the cutout in the cover.

10. Unhook the elastic seam of the cover under the edge of the seat shell.

TIP: Start at the handles on the side and at the upper edge of the seat shell.

11. Pull the cover up and over the bezel of the strap adjuster.

12. Feed out the harness buckle 07 and the end of the strap from the cover.

13. Pull the cover upwards a little and then put it with the cutout over the head-

rest 04 .

Re-tting the Cover:

Simply follow the steps in the opposite order.

Caution: Check that the harness straps are not twisted and that they

have been correctly inserted in the belt slots on the cover.

Storage compartment

MAX-FIX base

BRITAX RÖMER Child safety seats Testing and certication

in accordance with ECE R 44/04

Rearward facing Forward facing Group Body weight

MAX-WAY 1 2 – 9 – 25 kg

MULTI-TECH 2 1 2 – 9 – 25 kg

KIDFIX /KIDFIX SICT 2 3 – 15 – 36 kg

KID / KID plus 2 3 – 15 – 36 kg

0-18 kg

MAX-FIX

0 – 18 kg

0 ~ 4 y

User instructions

www.britax.eu

EDV-Nr. 2000007169 13/03

1. Pull the grey fabric loop 11 to pull

out both locking arms 12 .

2. Place the child seat in the direc-

tion of travel rearward-facing on

the vehicle seat.

INSTALLATION

3. Grasp the child seat with both

hands and slide the two locking

arms 12 rmly into the insert

guides 02 until the locking arms

engage with a clicking noise on

both sides. The green ISOFIX in-

dicators 14 must now be visible

on both sides.

The locking arms CAUTION!

are only correctly engaged if both

of the ISOFIX indicators 14 are

completely green.

5. Pull the support leg as far away

from the back of the child seat as

possible.

A correctly adjusted headrest 04 ensures optimal protection for your child in

the safety seat:

The headrest 04 must be adjusted so that the shoulder straps 06 are at the

same level as your child’s shoulders or slightly above.

The shoulder straps 06 must run at shoulder height or a little above the height

of the child’s shoulders.

►The shoulder straps 06 must not run behind the back of the child or at ear

height or above the ears.

9. Open the storage compartment 15 at the rear of the seat shell.

10. Pull up the belt height adjuster 20 and adjust the headrest by sliding the

back plate higher or lower.

11. Move the headrest 04 to the correct shoulder strap height and check that it

is properly engaged by lightly sliding the head rest

04 downwards.

6. Push both adjustment buttons 18

and pull out the support leg 17

until it rests rmly on the oor

of the vehicle. The support leg

indicator 19 must be completly

green

The support leg CAUTION! 07

must never be suspended in mid-

air or supported by other objects.

Also ensure that the support leg

17 does not raise the MAX-

FIX base 16 from the car seat

surface.

For the safety of your child, before every journey in the car check that...

• the child seat is engaged on both sides with the ISOFIX locking arms

12 in the ISOFIX attachment points 01 and that both ISOFIX indicators 14 are comple-

tely green;

• the child seat is securely fastened;

• the support leg is rmly on the vehicle oor and the support leg indicator

19 is green;

• the straps of the child seat are close to the body without constricting the child;

• the shoulder straps 06 are correctly adjusted and the straps are not twisted;

• the shoulder pads 05 are in the right position on your child‘s body;

• the buckle latches 21 are engaged in the harness buckle 07 .

If your child attempts to open the ISOFIX release buttons CAUTION! 13 or the harness buckle 07 , make sure to stop at the earliest opportunity. Check

that the child safety seat is correctly attached and make sure that your child is properly secured. Teach your child about the dangers involved.

Removing the child seat with ISOFIX

1. Push both adjustment buttons 18 and slide the lower section of the support leg

17 into the upper section until it is fully stored. Release the adjustment buttons

18 to x it in its storred position

2. Push the green ISOFIX indicator 14 and the red release button 13 on the two locking arms 12 towards each other. The locking arms 12 release.

3. Slide the ISOFIX locking arms 12 back into the seat shell 26

→ A rattling noise is produced when the locking arms are pushed back in.

TIP: The locking arms are protected against damage when they are pushed back into the seat base.

Remove the child safety seat from the vehicle.The child safety seat must never be transported in the car if it is not properly secured.CAUTION!

Preparatory work

1. If your vehicle is not equipped with the ISOFIX insert guides as

standard, clip the two insert guides 02 which are included with the

seat* with the cut-out facing upwards onto the two ISOFIX attach-

ment points 01 of your vehicle.

TIP: The ISOFIX attachment points are located between the surface

and the backrest of the vehicle seat.

2. Move the head restraint on the vehicle seat to the upper position.

* The insert guides make it easier to install the child safety seat with the aid of the ISOFIX

attachment points and prevent damage to the seat covering. When not in use, they should

be removed and stored in a safe place. On vehicles with a folding backrest the insert

guides must be removed before the backrest is folded.

Any problems which occur are usually caused by dirt or foreign objects on the insert gui-

des and on the hooks. Clean off any dirt or foreign objects to remedy this type of problem.

For the protection of all vehicle occupants

In the case of an emergency stop or an accident, persons or objects which are not properly secured in the car can cause injury to other vehicle

occupants. For this reason, please always check that...

• the backrests of the vehicle seats are locked (e.g. that the latch on a folding rear seat bench is engaged).

• all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are secured.

• all persons in the vehicle have their seatbelts fastened.

• the child safety seat is always secured in the car via the ISOFIX anchoring, even when there is no child in the seat.

For the protection of your child

• The more snugly the harness ts over your child‘s body, the safer your child will be.

• Please do not ever leave your child unattended in the child safety seat in the vehicle.

• Use on the rear seat:

Move the front seat forward far enough that you child‘s feet cannot hit the backrest of the front seat (to prevent risk of injury).

• The child safety seat can get hot in direct sunshine. Caution: Children‘s skin is delicate and could be injured as a result. Protect the child

seat against intensive direct sunlight when it is not currently in use.

• Only allow your child to enter and exit the vehicle on the pavement side.

• Make stops during longer journeys to give your child an opportunity to run about and play.

To protect your vehicle

Some vehicle seat coverings made of more delicate materials (e.g. velour, leather, etc.) may develop wear marks when child seats

are used. For optimum protection of your seat covers, we recommend using the BRITAX RÖMER Car Seat Protector, which is

available from our range of accessories.

Take the time to carefully read through these instructions, and always keep them ready to hand in the designated pocket on the child seat.

SECURING YOUR CHILD RECLINE POSITIONS

The MAX-FIX can be put into multiple

different positions.You can change

the recline position while the child is

installed in the car seat.

The most recline position gives your

child the most comfort for sleeping.

For younger children from 0-6 months

use the seat in its most recline position

with the infant insert to ensure your

child spine is supported whilst sleeping.

To change the positions turn the recline

wheel 10 .

7. Shake the child safety seat to

make sure it is safely attached

and re-check to the ISOFIX indi-

cators 14 to make sure that both

of them are completely green.

Your car seat is now fully installed

8. Follow the steps in the section „

SECURING YOUR CHILD“.

12. Open the harness buckle 07 (press red button)

13. Press the adjusting button 08 and at the same time pull both shoulder

straps 06 forwards. Do not pull on the shoulder pads 05 .

14. Have your child sit down in the child seat.

15. Guide the two buckle latches 21 together and engage them before putting

them into the harness buckle 07 - this should make a clicking noise.

16. Pull on the adjustment strap 09 until the harness lies at and is close

against your child‘s body.

CAUTION! Pull out the adjusting strap to the front.

CAUTION! The hip straps 22 must be positioned as low as possible over

your child‘s hips.

INFANT INSERT

The infant insert can be used for child-

ren between 0 - 6 months.

The infant insert ensures your baby´s

spine is supported during travel.

Installation of the infant insert:

1. Open the two plastic fasteners on

the infant insert

2. Place the infant insert into the child

seat and lay both shoulder straps

06 over the infant insert

3. Close both plastic fasteners

4. Slide the harness buckle 07 and

the crotch pad through the ope-

ning of the infant insert.

CAUTION! Make sure that your

child is always securely fastened.

4. Push the child seat with a sub-

stantial amount of force as far

back as it will go.

01 02

12 02

06 05

Produkt Specifikationer

Mærke:	Britax-Römer
Kategori:	Bilsæde
Model:	Max-Fix
Bredde:	450 mm
Dybde:	530 mm
Højde:	780 mm
Vægt:	14200 g
Produktfarve:	Grå
Monteringstype:	ISOFIX
Gruppe:	0+/1 (0 - 18 kg; 0 - 4 år)