Brother PT-D210 Manual

Brother Etiketprinter PT-D210

Læs gratis den danske manual til Brother PT-D210 (8 sider) i kategorien Etiketprinter. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Brother PT-D210, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Follow these guidelines to avoid the risk of fire, burns, injury, electric

shocks, rupture, overheating, abnormal odours or smoke.

• Always use the specified voltage and the suggested AC adapter (AD-24ES) for the

P-touch labeller to prevent any damage or failure.

• Do not touch the P-touch labeller during a lightning storm.

• Do not use the P-touch labeller/AC adapter in places of high humidity such as

bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage, the power cord or plug. Do not forcibly

bend or pull the power cord. Always hold the AC adapter when disconnecting from

the electrical socket.

• Make sure that the plug is fully inserted into the electrical socket. Do not use a socket

that is loose.

• Do not allow the P-touch labeller/AC adapter/power plug/batteries to get wet, for

example, by handling them with wet hands or spilling liquids on them.

• Since loss of eyesight may occur when leaked fluid from batteries gets into your eyes,

immediately rinse your eyes with a large amount of clean water, and then seek

medical attention.

• Do not disassemble or modify the P-touch labeller/AC adapter/batteries.

• Do not allow a metal object to contact both the plus and minus ends of a battery.

• Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC adapter and remove batteries immediately and stop using the

P-touch labeller if you notice abnormal odour, heat, discolouration, deformation or

anything unusual while using or storing it.

• Do not use a damaged or leaking battery as the fluid may get on your hands.

•

Do not use a deformed or leaking battery or one whose label is damaged as it may

generate excessive heat.

Follow these guidelines to avoid personal injury, liquid leakage,

burns or heat.

• When the P-touch labeller is not being used, store it out of the reach of children. In

addition, do not allow children to put the P-touch labeller parts or labels in their

mouths. If any object has been swallowed, seek medical attention.

• Do not touch metal parts around the print head immediately after printing.

• Do not touch the cutter blade.

• If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with

clean water.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the

P-touch labeller.

• Do not use a battery other than that specified. Do not use combinations of old and

new batteries or combinations of different types, different charging levels, different

manufacturers or different models. Do not insert a battery with its plus and minus

ends reversed.

• Do not drop or hit the P-touch labeller/AC adapter.

• Do not press the Liquid-Crystal Display (LCD).

• Do not put your finger inside the P-touch labeller when you close the cassette cover.

• Before using Ni-MH rechargeable batteries, carefully read the instructions for the

batteries and battery charger, and be sure to use them correctly.

• When using Ni-MH rechargeable batteries, charge the batteries with a specialised

battery charger before using the batteries. The AC adapter (AD-24ES) cannot be

used to recharge Ni-MH rechargeable batteries.

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, the colour of the label may change or be transferred

onto other objects. Before applying the label, check the environmental conditions and

the material.

• Do not use the P-touch labeller in any way or for any purpose not described in this

guide. Doing so may result in accidents or damage the P-touch labeller.

•

Use only Brother TZe tapes with the P-touch labeller. Do not use tapes that do not

have the mark.

• Only use a soft, dry cloth to clean the labeller; never use alcohol or other organic

solvents.

• Use a soft, lint free cloth to clean the print head. Never touch the print head

directly with your hands.

• Do not put any foreign objects into the tape exit slot, AC adapter connector, battery

compartment, etc.

• Do not place the P-touch labeller/batteries/AC adapter in direct sunlight or rain, near

heaters or other hot appliances, in any location exposed to extremely high or low

temperatures (e.g., on the dashboard or in the back of your car) or high humidity, or

in dusty locations.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print head.

• Do not pull the tape while printing or feeding; it will damage the tape and the P-touch

labeller.

• Any data stored in memory will be lost due to failure, repair of the P-touch labeller, or

if the battery discharges completely.

• The P-touch labeller is not equipped with a charging feature for rechargeable batteries.

• The printed text may differ from the text that appears on the LCD.

• The length of the printed label may differ from the displayed label length.

• A protective clear plastic sticker is placed over the display during manufacturing and

shipping. This sticker should be removed prior to use.

• When power is disconnected for more than three minutes, all text, format settings and

any text files stored in the memory will be cleared.

Safety Precautions

Safety PrecautionsSafety Precautions

Indicates a potentially hazardous

situation which, if not avoided,

could result in death or serious

injuries.

WARNING

Indicates a potentially hazardous

situation which, if not avoided, may

result in minor or moderate injuries.

General Precautions

General PrecautionsGeneral Precautions

CAUTION

Declaration of Conformity (Europe/Turkey Only)

We, Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku,

Nagoya 467-8561 Japan

declare that this product and AC adapter are in conformity with the essential

requirements of all relevant directives and regulations applied within the

European Community.

The Declaration of Conformity (DoC) can be downloaded from the Brother

Solutions Center.

Visit http://support.brother.com/ and:

• select "Europe"

• select your country

• select "Manuals"

• select your model

• select "Declaration of Conformity"

• click "Download"

Your Declaration will be downloaded as a PDF file.

GETTING STARTED

GETTING STARTEDGETTING STARTED

Power Supply and Tape Cassette

Power Supply and Tape CassettePower Supply and Tape Cassette

Open the cassette cover by pressing the

above indicated area at the top end of the

machine.

• If a tape cassette is already installed, remove it by

pulling it straight up. If batteries are already inserted,

remove them.

• The power must be turned off when replacing

batteries or tape cassettes.

Insert six new AAA alkaline batteries

(LR03) or fully charged Ni-MH batteries

(HR03), making sure their poles point in

the correct directions.

• Users of alkaline batteries:

Always replace all six batteries at the same time

with brand new ones.

• Users of Ni-MH batteries:

Always replace all six batteries at the same time

with fully charged ones.

Insert a tape cassette, making sure it

locks into place.

• The end of the tape must feed under the tape

guides.

• Use only Brother TZe tapes with this machine.

Securely close the cassette cover, making

sure it locks into place.

NOTE

When using AC adapter (AD-24ES)

1. Insert the plug on the adapter cord into

the AC adapter socket on the top end of

the machine.

2. Insert the plug into the nearest standard

electrical socket.

For memory backup, we recommend

using AAA alkaline batteries (LR03) or

Ni-MH batteries (HR03) together when

using the AC adapter.

1Print head

Tape cutter

lever

Cassette

cover

Toothed

Wheel

Cutter’s

edge

End of tape

Tape

exit slot

Tape guide

AC adapter jack

With your new Brother P-touch labeller, you can create a wide

variety of custom, self-adhesive labels. This labeller uses

Brother "TZe" tapes from 3.5 mm to 12 mm widths. "TZe" tape

cassettes are available in many colours and sizes. Visit

www.brother.com for a complete list of tapes compatible with

your machine.

Read this manual carefully before starting and keep the manual

in a handy place for future reference.

D011UL001

English

User’s Guide

Produkt Specifikationer

Mærke:	Brother
Kategori:	Etiketprinter
Model:	PT-D210

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother PT-D210 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Etiketprinter Brother Manualer

Brother PT-E560BT Manual

18 August 2025

Brother TJ-6421TN Manual

12 August 2025

Brother TJ-6521TN Manual

12 August 2025

Brother TD-2030ABK Manual

31 Juli 2025

Brother P-Touch H500 LI Manual

31 Juli 2025

Brother PT-H101GB Manual

12 Januar 2025

Brother P-Touch PT-1290DT Manual

12 Januar 2025

Brother P-touch PT-E310BTVP Manual

5 Januar 2025

Brother P-Touch PT-N10 Manual

25 December 2024

Brother P-Touch PT-N25BT Manual

25 December 2024

Etiketprinter Manualer

Nyeste Etiketprinter Manualer

CUSTOM KPM216HIII Manual

6 December 2025

CUSTOM K80 Manual

5 December 2025

CUSTOM VKP80III Manual

4 December 2025

CUSTOM TK862 Manual

4 December 2025

CUSTOM TK180 Manual

3 December 2025

CUSTOM TPTCM60III Manual

3 December 2025

CUSTOM PM2 Manual

3 December 2025

CUSTOM MODUS3 X Manual

3 December 2025

Adesso NuPrint 320B Manual

14 November 2025

Zebra ZD420t Manual

12 November 2025