Bunn ICB Infusion Series Twin Soft Heat Manual

Bunn Kaffemaskine ICB Infusion Series Twin Soft Heat

Læs gratis den danske manual til Bunn ICB Infusion Series Twin Soft Heat (3 sider) i kategorien Kaffemaskine. Denne vejledning er vurderet som hjælpsom af 98 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 49.5 anmeldelser. Har du et spørgsmål om Bunn ICB Infusion Series Twin Soft Heat, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

BUNN-O-MATIC CORPORATION

POST OFFICE BOX 3227

SPRINGFIELD, ILLINOIS 62708-3227

PHONE: (217) 529-6601 FAX: (217) 529-6644

www.bunn.com

ICB SH

ICB SH TWIN

Faucet Side Car Relocation

Instructions

TO BE PERFORMED BY QUALIFIED PERSONNEL

These instructions are intended for relocating the facuet side car on an ICB SH brewer. Ensure all tools are present before

performing the installation.

WARNING: Disconnect the brewer from the power source before performing the procedure. Ensure the

water is drained from the tank and be aware that many internal parts can be extremely hot; allow contents of

tank to cool before proceeding.

Note: If technical assistance is needed, please call 1-800-286-6345

Tools Required:

8/32 socket/wrench

Flat Blade Screwdriver

• Remove the plastic badge from the right

side of the brewer.

• Install the plastic badge on the left side of

the brewer to cover the panel holes.

• Install the base screw that was removed

in step 5.

STEP 7

• Remove the snap-in fastener from the

faucet side car and place into the hole

directly above as shown.

STEP 8

ICB SH Faucet Side Car Installation Instructions

• Place the plate assembly into the

uncovered holes on the inside of the right

panel.

• Place the spacer on the outside of the

right panel on the plate assembly.

STEP 9

• Remove the base screw on the right side.

STEP 10

• Align the faucet side car to the right side

of the brewer.

• Secure the faucet side car using the

washers and screws that were removed in

step 5.

STEP 11

• Insert the black grommet into the large

tubing hole. This is the same grommet

removed in step 5.

• Secure the base screw to the faucet side

car.

STEP 12

Plastic Badge

Secure

Remove

Fastener

Insert

Fastener

Plate Assembly

Spacer

Remove Base Screw

Align

Secure with

Washers &

Screws

Grommet

Produkt Specifikationer

Mærke:	Bunn
Kategori:	Kaffemaskine
Model:	ICB Infusion Series Twin Soft Heat

Har du brug for hjælp?

Hvis du har brug for hjælp til Bunn ICB Infusion Series Twin Soft Heat stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kaffemaskine Bunn Manualer

Bunn Titan TF Manual

27 August 2025

Bunn GPR-FF Manual

5 Juli 2025

Bunn Premia 208 Manual

20 Juni 2025

15 Juni 2025

15 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

13 Juni 2025

Kaffemaskine Manualer

Nyeste Kaffemaskine Manualer

Bosch VeroBar AromaPro 300 Manual

30 September 2025

Gorenje TCM350W Manual

30 September 2025

Profitec Go Manual

29 September 2025

Caple CM465BS Manual

29 September 2025

Profitec Pro 400 Manual

28 September 2025

Capresso Steam PRO Manual

27 September 2025

Capresso Perk Manual

27 September 2025

Capresso On-the-Go 425 Manual

26 September 2025

Lelit Anita PL42TEMD Manual

26 September 2025

Caffitaly S14 Manual

26 September 2025