Canon Pixma MG3522 Manual

Canon Printer Pixma MG3522

Læs gratis den danske manual til Canon Pixma MG3522 (3 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Canon Pixma MG3522, eller vil du spørge andre brugere om produktet?

Side 1/3
2
1
XXXXXXXX © CANON INC. 2013
5
3
6
4
7
1
2
2
1
1
2
3
4
5
Guía de inicio
Cierre la tapa de salida del
papel.
Conecte el cable de alimentación.
No conecte aún el cable USB.
Retire la cinta naranja y el material de protección.
Abra la tapa de salida del
papel.
Pulse el botón ACTIVADO
(ON).
Retire la cinta naranja y el material de protección de la parte posterior del
equipo.
ESPAÑOL
Abra la cubierta delantera
y la bandeja de salida del
papel.
Close the Paper Output
Cover.
Connect the power cord.
Do not connect the USB cable yet.
Remove the orange tape and protective material.
Open the Paper Output
Cover.
Press the button.ON
Remove the orange tape and protective material on the back of the machine.
ENGLISH
Video Tutorials Available
Getting Started
Open the Front Cover and
the Paper Output Tray.
EN
ES
EN
EN
ES
ES
EN
ES
EN
ES
EN
ES
EN
ES
QT5-6423-V01 PRINTED IN XXXXXXXX
3
8
1
2
3
4
5
6
1
2
7
(B)
(A)
Compruebe que la luz de
ACTIVADO (ON) (A) se
ilumina en verde.
¡No tocar!
Baje la palanca de bloqueo del cartucho de tinta.
Abra la bandeja de salida
del papel y la tapa de
salida del papel.
Si la cubierta del cabezal está cerrada, cierre la tapa
de salida del papel y vuelva a abrirla para abrir la
cubierta del cabezal.
Levante la palanca de
bloqueo del cartucho de
tinta.
Repita de a para
instalar el otro cartucho
FINE (FINE Cartridge).
Si la luz de Alarma (Alarm)
parpadea en naranja,
compruebe que los cartuchos
FINE (FINE Cartridges) estén
instalados correctamente.
Cierre la tapa de salida del
papel.
La luz de ACTIVADO (ON)
parpadea en verde durante
aproximadamente 1 minuto.
Espere a que se encienda y
continúe.
Si la luz de Alarma (Alarm)
parpadea (B) en naranja,
pulse el botón ACTIVADO
(ON) para apagar el equipo y
repita desde .
A la izquierda debe instalarse el cartucho FINE (FINE Cartridge) de color y a la derecha
debe instalarse el cartucho FINE (FINE Cartridge) negro.
Desembale el cartucho
FINE (FINE Cartridge) y
retire la cinta protectora.
Tenga cuidado con la tinta de
la cinta protectora.
Inserte el cartucho FINE
(FINE Cartridge) hasta
que se detenga.
¡No lo golpee contra los
lados!
Compruebe que la cubierta del cabezal se
ha abierto automáticamente.
Insértelo recto hasta que se
detenga.
Check that the lamp ON
(A) lights green.
Do not touch!
Lower the Ink Cartridge Lock Lever.
Open the Paper Output
Tray and the Paper Output
Cover.
If the Head Cover is closed, close the Paper Output
Cover and open it again to open the Head Cover.
Lift the Ink Cartridge Lock
Lever.
Repeat to to install
the other FINE Cartridge.
If the Alarm lamp ashes
orange, check that the FINE
Cartridges are installed
correctly.
Close the Paper Output
Cover.
The ON lamp ashes green for
about 1 minute. Wait until it is
lit, then proceed.
If the Alarm lamp (B) ashes
orange, press the button ON
to turn OFF the machine,
then redo from .
The left is where the Color FINE Cartridge is to be installed and the right is where the
Black FINE Cartridge is to be installed.
Unpack the FINE
Cartridge, then remove the
protective tape.
Be careful of ink on the
protective tape.
Insert the FINE Cartridge
until it stops.
Do not knock it against the
sides!
Check that the Head Cover has opened
automatically.
Insert it straight until it stops.
EN
ES
EN
ES
EN
ES
EN
ES
EN
ES
EN
ES
EN
ES
EN
ES
EN
ES
EN
ES
EN
ES
EN
ES


Produkt Specifikationer

Mærke: Canon
Kategori: Printer
Model: Pixma MG3522

Har du brug for hjælp?

Hvis du har brug for hjælp til Canon Pixma MG3522 stil et spørgsmål nedenfor, og andre brugere vil svare dig