Casio Baby-G BGA-255-1AER Manual

Casio Ur Baby-G BGA-255-1AER

Læs gratis den danske manual til Casio Baby-G BGA-255-1AER (7 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 76 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 38.5 anmeldelser. Har du et spørgsmål om Casio Baby-G BGA-255-1AER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

Operation Guide 5593

E-9

Hand Setting Mode

Stopwatch Mode Alarm Mode

C C

E-8

Selecting a Mode

Press C to cycle between the modes as shown below.

In any mode (except when a setting screen, with flashing digits is on the display),

press to illuminate the display.B

Timekeeping Mode

World Time Mode Countdown Timer Mode

C C

E-7

Mode Reference Guide

Your watch has 6 “modes”. The mode you should select depends on what you

want to do.

To do this: Enter this mode: See:

View the current date in the Home City

Configure Home City and daylight saving time (DST)

settings

Configure time and date settings

Timekeeping Mode E-11

View the current time in one of 27 cities

(29 time zones) around the globe World Time Mode E-19

Use the countdown timer Countdown Timer Mode E-21

Use the stopwatch to measure elapsed time Stopwatch Mode E-27

Set an alarm time Alarm Mode E-30

Adjust the analog hands Hand Setting Mode E-34

E-6

To turn an alarm and the Hourly Time Signal on and off……………………E-33

To stop the alarm ………………………………………………………………E-33

Adjusting the Analog Hand Setting…………………………………………………E-34

To adjust the analog time ………………………………………………………E-34

Illumination ……………………………………………………………………………E-36

To turn on illumination …………………………………………………………E-36

To change the illumination duration …………………………………………E-37

Troubleshooting ………………………………………………………………………E-38

Specifications …………………………………………………………………………E-39

Operating Precautions ………………………………………………………………E-41

User Maintenance ……………………………………………………………………E-52

E-5

To specify standard time or daylight saving time (DST) for a city …………E-20

Countdown Timer………………………………………………………………………E-21

To enter the Countdown Timer Mode …………………………………………E-21

To configure the countdown timer ……………………………………………E-24

To perform a countdown timer operation ……………………………………E-26

To stop the alarm ………………………………………………………………E-26

Using the Stopwatch …………………………………………………………………E-27

To enter the Stopwatch Mode …………………………………………………E-27

To perform an elapsed time operation ………………………………………E-28

To pause at a split time …………………………………………………………E-28

To measure two finishes ………………………………………………………E-28

Using the Alarm ………………………………………………………………………E-30

To enter the Alarm Mode ………………………………………………………E-31

To set an alarm time ……………………………………………………………E-32

To test the alarm ………………………………………………………………E-33

E-4

Contents

About This Manual …………………………………………………………………… E-2

Things to check before using the watch ………………………………………… E-3

Mode Reference Guide ……………………………………………………………… E-7

Timekeeping ……………………………………………………………………………E-11

Configuring Home City Settings ……………………………………………………E-12

To configure Home City settings ………………………………………………E-12

To change the Daylight Saving Time (summer time) setting ………………E-14

Adjusting the Digital Time and Date Settings ……………………………………E-15

To configure the digital time and date settings ………………………………E-15

Checking the Current Time in a Different Time Zone ……………………………E-19

To enter the World Time Mode ………………………………………………E-19

To view the time in another time zone ………………………………………E-19

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To configure Home City settings” (page E-12) to configure

your Home City and daylight saving time settings.

Important!

Proper World Time Mode data depend on correct Home City, time, and date

settings in the Timekeeping Mode. Make sure you configure these settings

correctly.

2. Set the current time.

See “Adjusting the Digital Time and Date Settings” (page E-15).

The watch is now ready for use.

E-2

About This Manual

Depending on the model of your watch, display text appears either as dark figures

on a light background, or light figures on a dark background. All sample displays in

this manual are shown using dark figures on a light background.

Button operations are indicated using the letters shown in the illustration.

Note that the product illustrations in this manual are intended for reference only,

and so the actual product may appear somewhat different than depicted by an

illustration.

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is

designed, carefully read and follow the instructions in this manual, especially the

information under “Operating Precautions” and “User Maintenance”.

Operation Guide 5593

E-19

Checking the Current Time in a Different Time Zone

You can use the World Time Mode to view the current

time in one of 29 time zones (27 cities) around the

globe. The city that is currently selected in the World

Time Mode is called the “World Time City”.

To enter the World Time Mode

Use to select the World Time Mode as shown on C

page E-8.

To view the time in another time zone

In the World Time Mode, use (East) to scroll through D

city codes.

Currently selected

World Time City

Current time in the currently

selected World Time City

E-18

Note

For information about selecting a Home City and configuring the DST setting, see

“Configuring Home City Settings” (page E-12).

While 12-hour format is selected for timekeeping, a indicator will appear for PM

times from noon to 11:59 p.m. No indicator appears for times from midnight to

11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any

PM indicator.

The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s battery replaced.

The day of the week changes automatically when the date changes.

E-17

3. When the timekeeping setting you want to change is flashing, use and/or D B

to change it as described below.

Screen To do this: Do this:

Reset the seconds to 00 Press D.

Toggle between Daylight Saving Time (ON)

and Standard Time (OFF)Press D.

Change the city code Use (East) and (West).D B

Change the hour or minute Use (+) and (–).D B

Toggle between 12-hour ( ) and 24-hour 12H

(24H) timekeeping Press D.

Change the year, month, or day Use (+) and (–).D B

4. Press to exit the setting screen.A

E-16

2. Press to move the flashing in the sequence shown below to select the other C

settings.

Time and Date

Seconds

DST

Home City Code

Hour

Minutes

C C

Illumination Duration

Day

Month

Year

12/24-Hour Format

The following steps explain how to configure timekeeping settings only.

E-15

Adjusting the Digital Time and Date Settings

Use the procedure below to adjust the digital time and date settings.

Note

After adjusting the digital time and date setting, be sure to adjust the analog hands

so the settings match.

See “Adjusting the Analog Hand Setting” (page E-34).

To configure the digital time and date settings

1. In the Timekeeping Mode, hold down for about twoA

seconds until the seconds start to flash. This is the

setting screen.

Seconds

E-14

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down for about two A

seconds until the seconds start to flash. This is the

setting screen.

2. Press to display the DST setting screen.C

3. Press to toggle between Daylight Saving Time (On) D

and Standard Time (OFF).

4. After the setting is the way you want, press to A

return to the Timekeeping Mode.

The indicator appears to indicate that Daylight DST

Saving Time is turned on.

DST indicator

E-13

2. Press twice to move the flashing to the city code.C

For details about city codes, see the “City Code

Table” at the back of this manual.

3. Press (East) and (West) to select the city code D B

you want to use as your Home City.

Keep pressing or until the city code you want D B

to select as your Home City appears on the display.

4. After the setting is the way you want, press toA

return to the Timekeeping Mode.

Note

After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current time

in your Home City.

* Coordinated Universal Time, the world-wide scientific standard of timekeeping.

The reference point for UTC is Greenwich, England.

City Code

E-12

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting

either standard time or daylight saving time (DST).

Note

After configuring Home City and/or Daylight Saving Time

(summer time) settings, be sure to adjust the analog

hands to match the digital settings.

See “Adjusting the Analog Hand Setting” (page E-34).

To configure Home City settings

1. In the Timekeeping Mode, hold down for about twoA

seconds until the seconds start to flash. This is the

setting screen.

The watch will exit the setting screen automatically

if you do not perform any operation for about two or

three minutes.

Seconds

E-11

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

Each press of D cycles the digital display contents as

shown below.

D D D

PM indicator

Day of the Week Month-Day Hour : Minutes Seconds

Hour

Day of week

Minutes

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the

modes.

Auto Return Features

If you leave a setting screen with flashing digits on the display for two or three

minutes without performing any operation, the watch exits the setting screen

automatically.

Initial Screens

When you enter the World Time Mode or Alarm Mode, the data you were viewing

when you last exited the mode appears first.

Scrolling

The and buttons are used on the setting screen to scroll through data on the B D

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Baby-G BGA-255-1AER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Baby-G BGA-255-1AER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025