Casio BGD-100-1BER Manual

Casio Ur BGD-100-1BER

Læs gratis den danske manual til Casio BGD-100-1BER (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Casio BGD-100-1BER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operation Guide 3164/3250

MA1006-EA

About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode Countdown Timer Mode Dual Time ModeAlarm ModeStopwatch Mode

Press .

General Guide

• Press C to change from mode to mode.

• In any mode, press B to illuminate the display for about one second.

Hour : Minutes

PM indicator

Seconds

Month, Day Day of week

Hold

down .

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date. While Active Display is turned on, the watch

maintains a count that is incremented each time you angle

it towards your face for viewing, or when you otherwise

move your arm. The watch changes the Timekeeping

Mode current time display to one of six different styles

automatically in accordance with the value of the count.

• Regardless of whether Active Display is turned on or off,

tilting the watch towards your face for viewing will cause

the display figures change size, rotate, or otherwise

change dynamically for approximately one second. The

way the display figures changes depends on the

currently selected display style.

• For more information about Active Display, see “Active

Display”.

• Holding down D in the Timekeeping Mode will display the current month, day, and

day of the week. The current time will return to the display about one second after

you release D.

Time Display Formats

Your watch can display the current time using any one of the following display formats.

12 - 11: This 12-hour format does not distinguish between noon and midnight, which

are both displayed as 12:00.

0 - 11: This 12-hour format does not distinguish between noon and midnight, which

are both displayed as 0:00.

0 - 23: This 24-hour format distinguishes between noon (12:00 0:00) and midnight ( ).

6 - 29: This 24-hour format uses a day that starts at 6:00 a.m. and ends at 5:59 a.m.

The date changes at 6:00 a.m.

• For information about setting the time, see “To set the time and date”.

• With a 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and no indicator appears for times in the range of

midnight to 11:59 a.m.

• With a 24-hour format, times are displayed without any indicator.

• The time format you select for the Timekeeping Mode also is applied in the Alarm

Mode and Dual Time Mode.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds Hour Minutes

Time format

Year

Active Display on/off

Day Month

3. When the setting you want to change is flashing, use D and B to change it as

described below.

Screen To do this:

Reset the seconds to 00

Change the hour or minutes

Select the time format :

12-11 , 0-23, 6-29, or 0-11

Change the year

Change the month or day

Turn Active Display on ( ) andon

off (OF)

Do this:

Press .D

Use ).D (+) and B (–

Press .D

Use ).D (+) and B (–

Press .D

Seconds

• For more information about Active Display, see Active Display“ ”.

4. Press A to exit the setting screen.

• Resetting the seconds to 00 while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to 00 without changing the minutes.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch s battery replaced.’

Active Display

While Active Display is turned on, the watch will display the Timekeeping Mode

current time using one of six different display styles. The style will be selected in

accordance with the value of a count the watch increments each time you angle the

watch towards your face or otherwise move your arm.

• While Active Display is turned on, a dancer animation

will appear at random intervals in the upper half of the

display. The dancer animation also will appear

whenever you change from one mode to another,

regardless of whether Active Display is on or off.

• While Active Display is turned off, you can select from

among Style 1 through Style 5 as the Timekeeping

Mode current time display style.

• Regardless of whether Active Display is turned on or off, tilting the watch towards

your face for viewing will cause the display figures change size, rotate, or otherwise

change dynamically for approximately one second. The way the display figures

changes depends on the currently selected display style.

• The following shows the six Timekeeping Mode current time display styles, which

are numbered from Style 1 to Style 6.

Style 1 Style 2 Style 3

Style 4 Style 5 Style 6*

Secret!

Minutes Hour

Seconds

PM indicator Hour : Minutes

* Style 6 appears only while Active Display is turned on. You cannot select Style 6

while Active Display is turned off.

• You may notice a very faint clicking sound coming from the watch when it is shaken

back and forth. This is the sound of the Active Display movement sensing

mechanism, and does not indicate malfunction of the watch.

To turn Active Display on and off

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C seven times to display the Active Display

on/off screen.

3. Press D to toggle Active Display on ( ) and off (on OF).

4. Press A to exit the setting screen.

• The Active Display on indicator ( ) is on theACT ON

display while Active Display is turned on.

• Displaying the setting screen while Style 6 is displayed

and turning off Active Display will change the display

style to Style 2 automatically.

Dancer Animation

Active Display on indicator

Operation Guide 3164/3250

Mode indicator

Minutes

To select a timekeeping display style

1. In the Timekeeping Mode, hold down A until the seconds start to flash. This is the

setting screen.

2. Press C seven times to display the Active Display on/off screen.

3. Use D to turn off (OF) Active Display.

• You cannot select the timekeeping display style while Active Display is turned on.

4. Press A to exit the setting screen.

5. In the Timekeeping Mode, press A to cycle through the available timekeeping

display styles (Style 1 through Style 5), until the one you want is displayed.

• Displaying the setting screen while Style 6 is displayed and turning off Active Display

will change the display style to Style 2 automatically.

Countdown Timer

The countdown timer can be set within a range of one to

60 minutes. An alarm will sound when the countdown

reaches zero.

• The initial factory default setting is one minute (01min).

• The countdown operation continues even if you exit the

Countdown Timer Mode.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

To set the countdown start time

In the Countdown Timer Mode, press A to increase the countdown start time

(minutes).

• You can set the countdown start time within the range of one minute ( ) to 6001min

minutes ( ), in one-minute increments.60min

• Holding down A will increase the countdown start time at high speed.

To perform a countdown timer operation

In the Countdown Timer Mode, press to start the countdown.D

• When the countdown reaches zero, the alarm tone will sound for 10 seconds or until

you stop it by pressing any button. The countdown time will reset automatically to its

starting value after the alarm stops.

• In addition to the alarm tone, a Flash Alert operation will be performed when the

countdown reaches zero. The Flash Alert operation will continue for 5 seconds or

until you stop it by pressing any button.

• Press D while a countdown operation is in progress to pause it. Press D again to

resume the countdown.

• To completely stop a countdown operation, first pause it (by pressing ), and thenD

press . This will return the countdown time to its starting value.A

• The remaining minutes and seconds are counted down on the display until the final

minute of the countdown. Only the seconds are displayed during the final minute.

Stopwatch

The stopwatch measures elapsed time.

• The display range of the stopwatch is 59 minutes, 59.99 seconds.

• Elapsed time operations are performed internally at units of 1/100-second. When

you stop an elapsed time operation, the 1/100-second value will appear on the

display.

Mode indicator

Seconds

1/100 second

Seconds Minutes

• Only the seconds are displayed during the first 59 seconds of an elapsed time

operation. After that, both the minutes and seconds are displayed.

• The stopwatch continues to run, restarting from zero after it reaches its limit, until

you stop it.

• The stopwatch measurement operation continues even if you exit the Stopwatch

Mode.

• All of the operations in this section are performed in the Stopwatch Mode, which you

enter by pressing C.

To measure elapsed time with the stopwatch

Elapsed Time

Start Stop Re-start Stop Clear

Screen when stopwatch elapsed time operation

is stopped at 40 minutes, 01.45 seconds

Mode indicator

Alarm time

(Hour : Minutes)

Alarm

When the daily alarm is turned on, the alarm tone will

sound when the alarm time is reached.

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Alarm Operation

The alarm tone will sound at the preset time for

10 seconds, regardless of the mode the watch is in.

• Alarm operations are performed in accordance with the

Timekeeping Mode time.

• To stop the alarm tone after it starts to sound, press any

button.

• In addition to the alarm tone, a Flash Alert operation will

be performed whenever the alarm time is reached. The

Flash Alert operation will continue for

5 seconds or until you stop it by pressing any button.

To set an alarm time

1. In the Alarm Mode, hold down A until the hour setting

of the alarm time starts to flash, which indicates the

setting screen.

• This will turn on the alarm automatically.

2. Press C to move the flashing between the hour and

minutes.

3. While a setting is flashing, use D

(+) and

B (–) to

change it.

4. Press A to exit the setting screen.

• With the 12-hour format, set the time correctly as a.m.

(no indicator) or p.m. (P indicator).

To turn an alarm on and off

In the Alarm Mode, press to toggle it on ( displayed) and off ( not displayed).D

•The alarm on indicator ( ) flashes while the alarm is sounding.

• The alarm on indicator ( ) is displayed in all modes.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

Alarm on indicator

Mode indicator

PM indicator

Dual time

(Hour : Minutes)

Dual Time

The Dual Time Mode lets you keep track of time in a

different time zone.

• In the Dual Time Mode, the seconds count is

synchronized with the seconds count of the

Timekeeping Mode.

To set the Dual Time

1. Press C to enter the Dual Time Mode.

2. In the Dual Time Mode, hold down A until the hour

setting starts to flash, which indicates the setting

screen.

3. Press C to move the flashing between the hour and

minutes.

4. While a setting is flashing, use D

(+) and

B (–) to

change it.

5. Press A to exit the setting screen.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto Display

Auto Display cycles automatically through the screens of

each mode.

To turn off Auto Display

Press any button except for (which will illuminate theB

display).

To turn on Auto Display

In the Timekeeping Mode, hold down and for aboutB D

two seconds.

• Note that Auto Display cannot be turned on while a

setting screen is on the display.

Flash Alert

While Flash Alert is turned on, a 5-second Flash Alert

operation (flashing EL backlight) will be performed along

with the alarm tone whenever an alarm time is reached or

when a countdown reaches zero. This helps to alert you

even in areas where surrounding noise is too loud to hear

the alarm tone.

• You can stop the Flash Alert operation and the alarm

tone by pressing any button.

• Note that Flash Alert is always enabled. You cannot turn

it off.

Button Operation Tone

The button operation tone will sound any time you press

one of the watch s buttons. You can turn the button’

operation tone on or off as desired.

• The daily alarm and countdown alarm tones continue to

sound even if you turn off the button operation tone.

To turn the button operation tone on and off

In any mode (except when a setting screen is on the

display), hold down to toggle the button operation toneC

on ( not displayed) and off ( displayed).

• Holding down C to turn the button operation tone on or off also causes the watch s’

current mode to change.

• The mute indicator is displayed in all modes when the button operation tone is

turned off.

Mute indicator

EL backlight

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	BGD-100-1BER
Armbånd, materiale:	Resin
Vandfast:	Ja
Stopur:	Ja
Urtype:	Armbåndsur
Batterilevetid:	2 År
Batteritype:	CR1616
Slagfast:	Ja
Alarmfunktion:	Ja
Produktdesign:	Mode
Mekanismetype:	Elektronisk
Se opkaldstype:	LCD-skive
Vandbestandig dybde:	100 m
Husets farve:	Sort
Båndets hovedfarve:	Sort
Etui form:	Rund
Hovedfarve på urskive:	Grøn
Køn:	Hunstik
Nøjagtighed:	30 sek/md
Se markørstil:	Arabisk nummervisning