Casio Collection W-213-1AVES Manual

Casio Ur Collection W-213-1AVES

Læs gratis den danske manual til Casio Collection W-213-1AVES (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Casio Collection W-213-1AVES, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Operation Guide 3170

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm

to sound every month at time you set, on the day you set.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

Press .

• To set a one-time alarm, display one of the screens indicated by an alarm number

from 2 through 5. To set the snooze alarm, display the screen indicated by 1.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

• This operation automatically turns on the alarm.

3. Press C to move the flashing in the sequence shown below to select other

settings.

Hour Minutes Month Day

4. While a setting is flashing, press D to increase it.

• To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set x for the month. Press D until the x mark appears (between 12 and 1) while

month setting is flashing.

• To set an alarm that does not include a day (Daily alarm, 1-Month alarm),

set xx for the day. Press D until the

xx mark appears (between the end of the

month and 1) while the day setting is flashing.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, until you turn the alarm off or change it to a one-

time alarm.

• To stop the alarm tone after it starts to sound, press any button.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the alarm

setting screen

To test the alarm

• In the Alarm Mode, hold down to sound the alarm.D

To turn Alarms

through

and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select a one-time alarm

(alarm number 2 through 5) or the Hourly Time Signal

(:00).

2. Press A to toggle it on and off.

• The on/off status of Alarms 2

through 5 and the Hourly

Time Signal is shown by indicators along the bottom of

the displays.

• The alarm on indicators and Hourly time Signal on

indicator are displayed in all modes.

• While an alarm is sounding, the applicable alarm on

indicator flashes on the display.

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds Hour Minutes

Day Month Year

3. When the setting you want to change is flashing, press D to change it as

described below.

MA0905-EA

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode Alarm Mode Stopwatch ModeCountdown Timer

Mode

Dual Time Mode

Press .

General Guide

• Press C to change from mode to mode.

• In any mode, press B to illuminate the display.

• In any mode, hold down for about two seconds to return to the TimekeepingC

Mode.

PM indicator

Day of week

Seconds

Hour : Minutes

Month – Day

To change this setting

Seconds

Hour, Minutes, Year, Month, Day

Perform this button operation

Press .D to reset to 00

Press D to increase the setting.

• Pressing while the seconds are in the range of 30 to 59 resets them to andD00

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press A to exit the setting screen.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch’s battery replaced.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping andD

24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Alarms

You can set up to five independent multi-function alarms

with hour, minutes, month, and day. When an alarm is

turned on, the alarm tone sounds when the alarm time is

reached. One of the alarms can be configured as a

snooze alarm or a one-time alarm, while the other four are

one-time alarms.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

• There are five alarms numbered

1 through 5. You can

configure Alarm

1 as a snooze alarm or a one-time

alarm. Alarms 2 through 5 can be used as one-time

alarms only.

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Alarm Types

The alarm type is determined by the settings you make, as described below.

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at time you set, only during the month you set.

Alarm number

Alarm date

(Month Day) –

Alarm time

(Hour : Minutes)

Hourly time signal

on indicator

Alarm on indicator

Operation Guide 3170

Backlight

The backlight uses an LED (light-emitting diode) and a

light guide panel that cause the entire display to glow for

easy reading in the dark.

• See “Backlight Precautions” for other important

information about using the backlight.

To turn on the backlight

In any mode, press to illuminate the display for aboutB

one second.

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

• The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing .C

To measure times with the stopwatch

Elapsed time

Start Stop Re-start Stop Clear

Start Split

( displayed)SPL

Split release Stop Clear

Start Split Stop Split release Clear

Split time

Two Finishes

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

To turn auto-repeat on and off

1. In the Countdown Timer Mode, hold down A until the

hours setting of the countdown start time starts to flash,

which indicates the setting screen.

2. Press B to toggle auto-repeat on ( displayed) and

off ( not displayed).

• Note that pressing B in the above operation also turns

on the backlight.

• When the end of the countdown is reached while

auto-repeat is on, the alarm sounds, but the countdown

restarts from the beginning without stopping. You can

stop the countdown by pressing and manually resetD

to the start time by pressing A.

• The auto-repeat indicator appears in the Countdown

Timer Mode only.

Dual Time

The Dual Time Mode lets you keep track of time in a different time zone.

• In the Dual Time Mode, the seconds count is synchronized with the seconds count

of the Timekeeping Mode.

To set the Dual Time

1. Press C to enter the Dual Time Mode.

2. In the Dual Time Mode, hold down A until the hour

setting starts to flash, which indicates the setting

screen.

3. Press C to change the selection in the following

sequence.

Hour Minutes

4. Press D to increase the setting.

5. Press A to exit the setting screen.

Countdown Timer

The countdown timer can be set within a range of

one minute to 24 hours. An alarm sounds when the

countdown reaches zero.

• You can also select auto-repeat, which automatically

restarts the countdown from the original value you set

whenever zero is reached.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

To use the countdown timer

Press while in the Countdown Timer Mode to start theD

countdown timer.

• When the end of the countdown is reached and auto-repeat is turned off, the alarm

sounds for 10 seconds or until you stop it by pressing any button. The countdown

time is automatically reset to its starting value after the alarm stops.

• The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

• Press D while a countdown operation is in progress to pause it. Press D again to

resume the countdown.

• To completely stop a countdown operation, first pause it (by pressing ), and thenD

press A. This returns the countdown time to its starting value.

To set the countdown start time

1. In the Countdown Timer Mode, hold down A until the

hours setting of the countdown start time starts to flash,

which indicates the setting screen.

2. Press C to move the flashing between the hours and

minutes settings.

3. While a setting is flashing, use D to increase it.

• To set the starting value of the countdown time to

24 hours, set 0:00.

4. Press A to exit the setting screen.

To select the operation of Alarm

1. In the Alarm Mode, use D to select Alarm

2. Press A to cycle through the available settings in the sequence shown below.

Snooze on indicator ( ) and Alarm1 on indicator

One-time

alarm on

Alarm off

Snooze

alarm on

Press .

•The snooze on indicator ( ) and Alarm1 on indicator are displayed in all modes.

• The snooze on indicator ( ) flashes during the 5-minute intervals between

alarms.

• The alarm indicator (Alarm

1 on and/or snooze on) flashes while the alarm is

sounding.

Seconds

Minutes

Hours

1/100 second

Seconds

Minutes

Hours

Auto-repeat indicator

Seconds

Hour : Minutes

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto return features

If you leave a screen with flashing digits for two or three minutes without performing

any operation, the watch automatically saves any settings you have made up to that

point and exits the setting screen.

Data and Setting Scrolling

The D button is used to scroll through setting screen data on the display. Holding

down this button during a scroll operation scrolls through the data at high speed.

Backlight Precautions

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The backlight automatically stops illuminating whenever an alarm sounds.

• Frequent use of the backlight shortens the battery life.

Specifications

Accuracy at normal temperature: ±30 seconds a month

Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week

Time system: Switchable between 12-hour and 24-hour formats

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Alarms:

5 Multi-function∗alarms (Four one-time alarms; one snooze/one-time alarm);

Hourly Time Signal

∗

Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm

Countdown Timer

Measuring unit: 1 second

Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)

Other: Auto-repeat function

Stopwatch

Measuring unit: 1/100 of a second

Measuring capacity: 23:59' 59.99''

Measuring modes: Elapsed time, split time, two finishes

Dual Time: Hour, minutes, seconds, p.m. (P)

Other: Backlight (light-emitting diode)

Battery: One lithium battery (Type: CR2025)

Approximately 10 years on type CR2025 (assuming alarm operation 10 sec./day,

and one backlight operation 1.5 sec./day)

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Collection W-213-1AVES

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Collection W-213-1AVES stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025