Casio DQ-746 Manual

Casio Ur DQ-746

Læs gratis den danske manual til Casio DQ-746 (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Casio DQ-746, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Operation Guide DQ-746

MA0506-EA

•A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the

clock.

•Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.

Current time

(Hour, minutes,

seconds)

Day of the week

Current

temperature

Date

(month - day)

PM indicator

Alarm time

Snooze on

indicator

Alarm on indicator

Alarm Off Snooze Alarm On

SNZ

OFF

SET° °C/ F

RESETINVALID

ILLUSTRATION GENERAL GUIDE

1SNOOZE/LIGHT button

•Press this button to illuminate the display for about five seconds.

•Pressing this button while the alarm is sounding stops the alarm.

2Alarm Mode selector

SNZ: Snooze alarm on

ON: Alarm on

OFF: Alarm off

3+ / – buttons

Use these buttons to change the alarm time or the setting that is flashing on the display.

°C/°F button

Press this button to toggle the temperature units between Celsius and Fahrenheit.

5SET button

Use this button when setting the current time.

6RESET button

Press this button to reset the clock after replacing its batteries.

•Buttons marked “INVALID” have no function.

USING THE CLOCK

1. Press the SET button ( ) to cycle through the setting screens as shown below.5

12-hour/24-hour

Timekeeping Screen

Time Setting ScreenMonth and Day

Setting Screen

Year Setting Screen

Normal Timekeeping Screen

2. While the screen you want is displayed, use the and buttons+ –

(3) to change the flashing digits.

•Holding down or changes the flashing digits at high speed. + –

•You can set the year in the range of 2000 to 2039. The day of the

week is set automatically in accordance with the date setting.

•Pressing or while the Time Setting Screen is on the display+ –

causes the seconds count to be reset to 00.

•Each press of + – or while the 12-hour/24-hour Timekeeping

Screen is on the display toggles between 12-hour and 24-hour

timekeeping.

3. After making the settings you want, use the SET button ( ) to display the Normal Timekeeping Screen.5

•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for

about three minutes without performing any operation.

SET° °C/ F

Press

increase

the flashing

digits.

Press

–

decrease

the flashing

digits.

Operation Guide DQ-746

USING THE ALARM

The alarm sounds when the alarm time you set is reached. You can also use the ) toAlarm Mode selector (2

select the snooze alarm feature.

Setting the Alarm Time

Use the and buttons ( ) to set the alarm time.+–3

Pressing the and buttons ( ) causes the alarm time to appear+–3

in place of the date on the display.

•Holding down + or – changes the digits at high speed.

Turning the Alarm On and Off

Use the ) on the side of the clock to turn the alarm on and off, and to select the snoozeAlarm Mode selector (2

feature.

•The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON

or SNZ.

•The light also turns on for the first four seconds that the alarm sounds.

•The alarm sound changes over four levels as it sounds.

Stopping the Alarm

•When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,

the alarm will sound again in about five minutes.

•To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.

USING THE LIGHT

Pressing the ) turns on the light and illuminates the display for easy reading in the dark.SNOOZE/LIGHT button (1

Important!

•Overuse of the light can shorten battery life.

THERMOMETER FUNCTIONS

•A built-in sensor measures temperature and shows the measured value on the display.

• ° °The temperature display shows “ ” –LO for temperatures below 50 C (–58 F) and “ ”HI for temperatures above

70 F).°C (158°

• ° ° ° °Though temperature readings are displayed up to 0 C (32 F) and greater than 41 C (105 F), note that such

readings are actually outside the guaranteed temperature range of this clock.

Switching between Celsius and Fahrenheit

•Push the °C/°F button (4) to select either Celsius (°C) or Fahrenheit (°F).

° °C/ F button ( )4

°C

°F

Celsius ( C) Fahrenheit ( F)° °

SET° °C/ F

Press

change the

alarm time

setting.

Press

–

change the

alarm time

setting.

Alarm Mode selector

OFF

Description

The alarm sounds at the preset time for one minute, and up to seven more times every

five minutes thereafter. Even if you stop the alarm by pressing the buttonSNOOZE/LIGHT

(1), the alarm sounds again five minutes later.

•The indicator

flashes on the display to indicate that the snooze feature is activated.

The alarm sounds at the preset time for one minute.

The alarm does not sound.

SNZ

BATTERY REPLACEMENT

Replace batteries whenever the display of the clock becomes dim and difficult to read.

1. Open the battery compartment cover as shown in the illustration.

2. Remove both of the old batteries.

3. Load two new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If

you load batteries incorrectly, they can burst and damage the clock.

4. Press the RESET RESET button (6). Be sure to press the button ( ) after replacing batteries.6

5. Replace the battery compartment cover.

Battery precautions

•Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician

immediately.

•Be sure to load the batteries with their positive (+) and negative ( ) ends facing correctly.–

•Never mix old and new batteries, or batteries of different brands.

•Never charge the batteries that come with the clock.

•Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto

your skin.

•Replace the batteries at least once a year, even if the current batteries are working properly.

•The batteries that come with the clock lose some of their power during transport and storage.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	DQ-746

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio DQ-746 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio DQR-100U Manual

18 Juni 2025

Casio MTP-V006 Manual

18 Juni 2025

Casio TMR-72 Manual

18 Juni 2025

Casio DQ-748 Manual

18 Juni 2025

Casio MTP-V005D Manual

18 Juni 2025

Casio TSQ-1200 Manual

18 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

18 Juni 2025

Ur Manualer

Nyeste Ur Manualer

ELYSEE Nestor 15103M Manual

18 Juni 2025

ELYSEE Bronze Automatic 98013 Manual

18 Juni 2025

ELYSEE Nestor 15102 Manual

18 Juni 2025

ELYSEE Monumentum Automatic 77021S Manual

18 Juni 2025

ELYSEE Zelos 98002M Manual

18 Juni 2025

ELYSEE Sithon 13270M Manual

18 Juni 2025

ELYSEE Racetrack1 80560WB Manual

18 Juni 2025

ELYSEE Vintage Chrono 80550 Manual

18 Juni 2025

ELYSEE Minos 83820M Manual

18 Juni 2025

ELYSEE Rally Timer I 80535 Manual

18 Juni 2025