Casio ERA-600D-1A9VUEF Manual

Casio Ur ERA-600D-1A9VUEF

Læs gratis den danske manual til Casio ERA-600D-1A9VUEF (6 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Casio ERA-600D-1A9VUEF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

E-7

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current date in the Home City

• Configure Home City and daylight saving time (DST) settings

• Configure time and date settings

Timekeeping Mode E-13

Determine the temperature at your current location Thermometer Mode E-21

Use the stopwatch to measure elapsed time Stopwatch Mode E-25

Use the countdown timer Countdown Timer Mode E-27

View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-29

• Set an alarm time

• Turn the hourly time signal on or off Alarm Mode E-32

E-6

Illumination ………………………………………………………………………………………………… E-35

To turn on illumination manually …………………………………………………………………… E-35

To change the illumination duration ……………………………………………………………… E-35

To enable or disable auto light……………………………………………………………………… E-37

Button Operation Tone …………………………………………………………………………………… E-39

To enable or disable the button operation tone ………………………………………………… E-39

Troubleshooting …………………………………………………………………………………………… E-40

Specifications ……………………………………………………………………………………………… E-43

E-5

Using the Stopwatch ……………………………………………………………………………………… E-25

To enter the Stopwatch Mode ……………………………………………………………………… E-25

To perform an elapsed time operation …………………………………………………………… E-26

To pause at a split time ……………………………………………………………………………… E-26

To measure two finishes …………………………………………………………………………… E-26

Using the Countdown Timer ……………………………………………………………………………… E-27

To enter the Countdown Timer Mode ……………………………………………………………… E-27

To specify the countdown start time ……………………………………………………………… E-27

To perform a countdown timer operation ………………………………………………………… E-28

To stop the alarm …………………………………………………………………………………… E-28

Checking the Current Time in a Different Time Zone ………………………………………………… E-29

To enter the World Time Mode …………………………………………………………………… E-29

To view the time in another time zone …………………………………………………………… E-29

To specify standard time or daylight saving time (DST) for a city ……………………………… E-30

To swap your Home Time and World Time Cities ……………………………………………… E-31

Using the Alarm …………………………………………………………………………………………… E-32

To enter the Alarm Mode …………………………………………………………………………… E-32

To set an alarm time ………………………………………………………………………………… E-33

To test the alarm …………………………………………………………………………………… E-33

To turn an alarm and the Hourly Time Signal on and off………………………………………… E-34

To stop the alarm …………………………………………………………………………………… E-34

E-4

Contents

About This Manual …………………………………………………………………………………………… E-2

Things to check before using the watch ………………………………………………………………… E-3

Mode Reference Guide ……………………………………………………………………………………… E-7

General Functions (All Modes) …………………………………………………………………………… E-10

Timekeeping ………………………………………………………………………………………………… E-13

Configuring Home City Settings ………………………………………………………………………… E-14

To configure Home City settings …………………………………………………………………… E-14

To change the daylight saving time (summer time) setting……………………………………… E-15

Configuring Current Time and Date Settings ………………………………………………………… E-16

To change the current time and date settings …………………………………………………… E-16

Hand Home Position Adjustment ……………………………………………………………………… E-19

To adjust home positions …………………………………………………………………………… E-19

Taking Temperature Readings …………………………………………………………………………… E-21

To take temperature readings ……………………………………………………………………… E-21

To calibrate the temperature sensor ……………………………………………………………… E-23

Specifying Temperature Unit …………………………………………………………………………… E-24

To specify the temperature unit …………………………………………………………………… E-24

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To configure Home City settings” (page E-14) to configure your Home City and

daylight saving time settings.

Important!

• Proper World Time Mode data depends on correct Home City, time, and date settings in the

Timekeeping Mode. Make sure you configure these settings correctly.

2. Set the current time.

See “Configuring Current Time and Date Settings” (page E-16).

The watch is now ready for use.

E-2

About This Manual

• Depending on the model of your watch, digital display text appears

either as dark figures on a light background, or light figures on a dark

background. All examples in this manual are shown using dark figures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Warning!

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of your watch or its malfunction.

Operation Guide 5499

E-15

5. After all of the settings are the way you want, press A to exit the setting screen.

• The indicator appears to indicate that daylight saving time is turned on.DST

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate

the current time for other time zones based on the current time in your Home City.

* Coordinated Universal Time, the world-wide scientific standard of timekeeping.

The reference point for UTC is Greenwich, England.

To change the daylight saving time (summer time) setting

1. In the Timekeeping Mode, hold down A until ADJ appears in the

lower display.

• When you release A (after ADJ appears), SET

will be flashing in

the upper display.

2. Press C.

• This will cause the

DST indicator to appear in the upper display and

the DST setting of the currently selected Home City to appear in the

lower display.

3. Press D to toggle the DST setting between daylight saving time (

ON) and standard time (OFF).

4. After all of the settings are the way you want, press A to exit the setting screen.

• The indicator appears to indicate that daylight saving time is turned on.DST

E-14

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting either standard time or

daylight saving time (DST).

To configure Home City settings

1. In the Timekeeping Mode, hold down A until ADJ appears in the

lower display.

• When you release A (after ADJ appears), SET

will be flashing in

the upper display. This is the setting mode.

• The watch will exit the setting mode automatically if you do not

perform any operation for about two or three minutes.

2. Use D (East) and B (West) to scroll through the available city codes.

• Keep scrolling until the city code you want to select as your Home

City is shown in the lower display.

• For details about city codes, see the “City Code Table” at the back

of this manual.

3. Press C.

• This will cause the

DST indicator to appear in the upper display and

the DST setting of the currently selected Home City to appear in the

lower display.

4. Press D to toggle the DST setting between daylight saving time (

ON)

and standard time (

OFF ).

• Note that you cannot switch between standard time and daylight

saving time (DST) while UTC is selected as your Home City.

City code and city name

DST indicator

E-13

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• Each press of A in the Timekeeping Mode will change digital display contents as shown below.

Timekeeping

Mode

Hour hand

Day of week

Minute hand

Month Day

Second hand

Seconds

Date Screen

Seconds

Hour : MinutesPM indicator

Time Screen

E-12

2. Holding down B again as you press C will cause the hands to return to their normal positions (normal

timekeeping).

Note

• Watch button functions are the same regardless of whether the hands are moved out of the way or at

their normal positions.

• Changing to another mode will cause the hands to move back to their normal positions.

• The hands also will move back to their normal positions automatically if no operation is performed for

about one hour.

E-11

Moving the Hands Out of the Way for Better Viewing

You can use the procedure below to temporarily move the hour and minute hands out of the way to better

view what is on the display.

• This operation can be performed in any mode. In the case of a setting mode (setting flashing on the

screen), the hands will move out of the way automatically, even if you do not perform the operation

below.

1. While holding down B, press

• This will cause the hour and minute hands to move to a location where they do not block your view

of the digital display.

Example: When the current time is 10:08

Flashes while the hands

are moved out of the way.

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation

for a particular amount of time in each mode.

Mode Name Approximate Elapsed Time

Alarm 3 minutes

Thermometer 1 to 2 minutes

Setting screen (digital setting flashing) 3 minutes

Initial Screens

• When you enter the Timekeeping, Alarm, or World Time Mode, the data you were viewing when you last

exited the mode appears first.

Scrolling

• The

D and B buttons are used on the setting screen to scroll through data on the digital display. In

most cases, holding down these buttons during a scroll operation scrolls through the data at high

speed.

E-9

• The dial hand indicates the watch’s current mode.

Stopwatch Mode Countdown Timer Mode

Alarm Mode World Time Mode

E-8

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between modes.

• To return to the Timekeeping Mode from any other mode, hold down C for about two seconds.

Timekeeping Mode

Thermometer Mode

Dial hand

Operation Guide 5499

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	ERA-600D-1A9VUEF

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio ERA-600D-1A9VUEF stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025