Casio Exilim EX-TR700 Manual
Casio
Digital kamera
Exilim EX-TR700
Læs gratis den danske manual til Casio Exilim EX-TR700 (159 sider) i kategorien Digital kamera. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Casio Exilim EX-TR700, eller vil du spørge andre brugere om produktet?
Side 1/159

Digital Camera
EN
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/

2
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
Accessories
Rechargeable lithium ion
battery (NP-150)
USB-AC adaptor
(AD-C54UC) Micro USB cable

3
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of EXILIM Connect.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in ex that some very small number cess of 99.99%. This means
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Read this first!
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.

4Contents
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . . 9
Quick Start Basics 12
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the Camera Style to Suit Shooting Conditions . . . . . . . . . . . . . . . . 14
Opening and Closing the Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Rotating the Monitor Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Camera Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Loading the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 26
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Turning Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
To Shoot a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Recording Images 39
Selecting a Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Make-up). . . 41
Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Art Shot). . . 42
Shooting with Posing Shot . . . . . . . . . . . . . . . . . . . . . . . . . . . (Posing Shot). . . 44
Shooting a Selfie with Distinctive Effects . . . . . . . . . . . . . . . . . (Selfie Art) . . 45
Shooting with Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Shooting a Self-portrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Selfie timer) . . 47
Using the LED Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (LED) . . 48
Adjusting Skin Tone and Texture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Recording Movie 50
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Shooting a Movie of Short Clips . . . . . . . . . . . . . . . . . . . . . (Instant Movie) . . 53
Configuring Recording Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Shooting the Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

5Contents
Using BEST SHOT 56
Using Motion Shutter to Trigger a Self-timer Operation . .(Motion Shutter) . . 57
Shooting with High Speed Night Scene . . . . . . . . . . . . .(HS Night Scene) . . 58
Shooting with High Speed Night Scene
and Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . (HS Night Scene Portrait) . . 59
Shooting Beautiful Food Images . . . . . . . . . . . . . . . . . . . . . . . . . . . (Food) . . 59
Shooting Beautiful Nail Art Images . . . . . . . . . . . . . . . . . . . . . . . . . (Nails) . . 59
Digitally Correcting for Overexposure and Underexposure . . . . . . (HDR) . . 60
Shooting with Triple Shot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Advanced Recording Settings 62
Using the REC Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Using Touch Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Touch Shutter). . . 63
Editing a Movie as You Shoot It . . . . . . . . . . . . . . . . . . . . . . (Instant Movie) . . . 63
Horizontally Flipping the Recording Image . . . . . . . . . . . . . (L/R Flip Shot) . . . 64
Shooting in a Dark Location . . . . . . . . . . . . . . . . . . . . . . (Lightness Priority). . . 64
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . . 65
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Image Size) . . . 66
Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . (Movie Quality) . . . 67
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . (Brightness) . . . 67
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance). . . 68
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO) . . . 69
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus). . . 70
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review) . . . 71
Viewing Snapshots and Movies 72
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Displaying the Make-up Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . . . (Movie Editing). . . 75
Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Creating a Promotion Movie . . . . . . . . . . . . . . . . . . . . . (Promotion Movie) . . 77
Other Playback Functions (PLAY) 79
Using the PLAY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . . . 80
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . . (Protect) . . . 81
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . . . 82
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize) . . . 82
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming). . . 83

6Contents
Connecting the Camera with a Smartphone
(Wireless Connection) 84
Controlling Your Camera with a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . 84
Using a Wireless Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Getting Ready to Establish a Connection between a Smartphone
and Your Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Installing the EXILIM Connect App on Your Smartphone . . . . . . . . . . . . . . . . . . 89
Establishing a Wireless Connection for the First Time . . . . . . . . . . . . . . . . . . . . 90
Using a Smartphone as a Camera Remote Controller (Shoot with phone) . . 92
Sharing Snapshots with an Unpaired Smartphone . . . . (One Time Share) . . 94
Sending Images from the Camera to a Smartphone
as They are Recorded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Auto Send) . . 96
Sending a Snapshot or Movie File from Camera Memory
to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . (Send Selected Image) . . 98
Viewing Snapshots and Movies in Camera Memory
on a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (View on phone) . . 99
Configuring Wireless Connection Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Entering the Camera’s Airplane Mode . . . . . . . . . . . . . . . . (Airplane Mode). . 100
Sending Images from the Camera to a Smartphone
as They are Recorded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Auto Send). . 101
Specifying Images to be Sent by Auto Send . . . . (Auto Send File Settings). . 101
Resizing Snapshots before Sending Them
to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize before send). . 101
Add Location Info to Snapshots . . . . . . . . . . . . . . . . . . . . . . (Location info). . 102
Changing the Camera Password
for Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . (WLAN password). . 103
Unpairing the Camera from a Smartphone . . . . . . . . . . . . . . . . (Unpairing). . 104
Printing 105
Printing with a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Using the Camera with a Computer 106
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . 106
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . 110
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

7Contents
Other Settings (Set Up) 115
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . .(Screen) . 115
Selecting Display Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Info) . 115
Locking the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Screen Lock) . 116
Specify the Shutter Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . 116
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . .(Timestamp) . 117
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . 118
Setting a Travel Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Selecting the Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 119
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 119
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 120
Displaying a Startup Screen at Power On . . . . . . . . . . . . . . . . . .(Startup) . 121
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) . 121
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) . 122
Checking the Current Camera Firmware Version . . . . . . . . . . . . (Version) . 122
Appendix 123
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 153
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

8
The numbers in parentheses indicate the pages where each item is explained.
• Above illustration shows the camera’s cover removed (page 19).
General Guide
Frame (page 14)
Monitor screen
(pages 9, 17, 115)
Microphone
(pages 17, 52)
LED light (page 48)
[p] (Power) (page 31)
Lens
Operation lamp
(pages 22, 25, 31, 33)
Shutter button
(page 33)
Speaker
Strap hole (page 8)
2
5
8
76
41 3
bk
9
bl bm
bnbo
Battery compartment (page 19)
Memory card slot (page 29)
[USB] port (pages 21, 24)
[OPEN] button (pages 19, 29)
1
2
To attach the strap to the camera
(commercially available or separately available)
Attach strap here.

9
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
.Snapshot Recording
NOTE
• If you do not perform any operation for about four seconds during snapshot
recording or movie recording, icons will become transparent.
Monitor Screen Contents and How to Change Them
PLAY mode icon (page 31)
“ ” (Show Icons) icon
Make-up icon (page 41)
White Balance (page 68)
Focus mode (page 70)
Digital zoom (page 46)
Timestamp (page 117)
Self-timer mode (page 65)
Snapshot image size (page 66)
Movie quality (pages 50, 67)
Battery level indicator (page 26)
LED light icon (page 48)
Remaining movie memory capacity
(page 154)
Remaining snapshot memory capacity
(page 153)
Wireless LAN communication status
(page 88)
“ ” Movie icon (pages 34, 51)
Date/Time (pages 26, 119)
Brightness (page 67)
ISO sensitivity (page 69)
Bluetooth communication status
(page 88)/Airplane mode (page 100)
Location info (page 102)
Auto Send (page 96)
Menu icon (page 62)
Recording mode icon (page 40)
Wireless mode icon (page 87)
Selfie Art icon (page 45)
bq
bs
bt
1 3
cq1 cp co cn
2
br
cl
cm
ck
9
7
8
5
4
bk
bl
bn bmbobp
6

10
.Movie Recording
.Snapshot Viewing
Movie quality (
pages 50, 67)
Recording time switch icon (page 51)
Movie remaining time icon (page 51)
Remaining movie memory capacity/
Movie recording time (pages 51, 154)
“ ” Movie stop icon (pages 34, 51)
421 3
5
Protect indicator (page 81)
“ ” (Show Icons) icon
Folder name-file name (page 113)
Snapshot image size (page 66)
Image sent (page 96)
Wireless LAN communication status
(page 88)
Battery level indicator (page 26)
Confirm first icon (page 96)
Date/time (pages 26, 119)
Image menu icon (p
age 76)
Shutter speed
Brightness (page 67)
ISO sensitivity (page 69)
Bluetooth communication status
(page 88)/Airplane mode (page 100)
Location info (page 102)
White Balance (page 68)
Auto Send (page 96)
Menu icon (page 79)
Delete icon (page 36)
Wireless mode icon (pages 87, 99)
Promotion Movie icon (page 77)
REC mode icon (page 31)
cm cl ck bt bs
7
8
6
5
42cm 1 3
9
bk
bl
bm
bn
bo
bp
bq
br

11
NOTE
• The folder name and file name in the upper right corner of the monitor screen has
the meaning described below (page 113).
Example: 100-0023: 23rd image file in the folder named “100CASIO”.
• If you do not perform any operation for about four seconds during snapshot viewing
or movie playback, icons will become transparent.
.Movie Playback
Protect indicator (page 81)
“ ” (Show Icons) icon
Folder name-file name (page 113)
Repeat playback icon (page 73)
Movie quality (pages 50, 67)
Movie recording time (page 73)
Date/time (pages 26, 119)
Image menu ico
n (page 76)
“ ”
Movie play ico
n (page 73)
6
5
78
9
421 3

12 Quick Start Basics
Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
What you can do with your CASIO camera
Shooting better looking portraits/
Beautiful images, even in dark
locations
Make-up adjusts skin tone and texture to make your
portraits look better.
The effect of Make-up provides bright images even in
dark locations.
Simple self-portrait shooting
The monitor screen can be rotated so it faces in the
same direction as the camera’s lens, making self-
shooting much easier.
Selfie Art
Apply different effects to make self-portraits shot better
looking and more interesting.
Instant Movie
Movie recording can be paused and resumed as
required to create a short movie quickly and easily.
*See pages 41, 64 for more information.
*See page 47 for more information.
*See page 45 for more information.
*See page 53 for more information.

13 Quick Start Basics
Wireless Connection
Use EXILIM Auto Transfer to transfer images you
shoot with the camera to a smartphone or a social
networking service automatically.
You can also turn your smartphone into a camera
remote controller and send images recorded with your
camera to your smartphone.
One Time Share
Share selected snapshots for viewing on smartphones
that are not paired with the camera.
The Scene app needs to be installed on the
smartphone in order to use One Time Share.
Posing Shot
Posing Shot lets you shoot five successive snapshots,
as the camera provides voice guidance for each. This
lets you strike a pose for each individual shot.
*See page 84 for more information.
*See page 94 for more information.
*See page 44 for more information.

14 Quick Start Basics
You can change the configuration of the camera by opening or closing the frame and
rotating the monitor screen panel to suit shooting conditions.
IMPORTANT!
• Do not apply strong pressure to the surface of the monitor screen. Doing so can
damage it.
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
The camera’s frame can be rotated up to
225 degrees as shown in the illustration.
1. With the lens facing towards you, hold
onto the frame.
2. Push the monitor screen panel.
3. Holding the edges of the monitor
screen panel, swing the frame open.
IMPORTANT!
• Do not try to open or close the frame while the monitor screen panel is rotated.
Doing so can cause the frame to come into contact with the monitor screen panel
and cause malfunction.
Changing the Camera Style to Suit Shooting Conditions
Opening and Closing the Frame
225 degrees

15 Quick Start Basics
Use the steps below to rotate the monitor screen.
NOTE
• While holding the monitor screen panel as shown in the illustration, you can rotate
it up to 270 degrees counterclockwise.
1. Hold the camera as shown in the
illustration.
2. Firmly holding the frame, carefully
rotate the monitor screen panel.
Rotating the Monitor Screen
270 degrees counterclockwise

16 Quick Start Basics
You can open the frame and rotate the monitor screen for a variety of different styles.
Camera Configurations
Normal Shooting Shooting with the Frame
Shoot with the monitor screen facing the
opposite direction of the lens.
Open the frame 90 degrees and hold the
frame. You can also shoot with the
camera upside down, if you like.
Tabletop Shooting Self-portrait Shooting
Point the monitor screen and lens in the
same direction and open the frame
about 30 degrees so the camera can
stand up.
Open the frame, point the monitor
screen and lens in the same direction.

17 Quick Start Basics
NOTE
• When shooting hold the camera still. Carefully press the shutter button and take
care to avoid all movement as the shutter releases and for a few moments after it
releases.
• Take care that your fingers and the strap do not cover
any of the areas indicated in the illustration.
• To protect against accidentally dropping the camera,
attach the wrist strap (commercially available or
separately available) and make sure it is around your
fingers or wrist while you are operating the camera.
• Never swing the camera around by its strap.
IMPORTANT!
• Take care to ensure that your finger is not blocking or
is not too close to the LED light. Fingers can cause
unwanted shadows when shooting.
The monitor screen of the camera is a touch panel. This means you can perform the
following operations by touching the screen with your fingers.
Touch
Momentarily touching the screen with your finger.
Touch the screen to select an icon or menu item, and
to configure settings.
You can zoom in and zoom out on a displayed image
by tapping it twice in succession.
Touch-and-hold
Holding your finger against the screen.
Touch and hold the screen to perform continual
frame-by-frame playback of a movie.
Using the Touch Panel
Microphone
Lens
LED light

18 Quick Start Basics
Drag
Holding your finger against the screen as you drag it
up, down, left, or right.
Use drag to move a screen image to a different
location, and to scroll between images.
Flick
Holding your finger against the screen as you flick it
up, down, left, or right.
Use flick to scroll forward through images.
To scroll forward or back multiple images, first drag
in the direction opposite the direction you want to
scroll, and then flick in the desired scroll direction.
Spread
Holding your thumb and forefinger against the screen
as you spread them out.
Use spread to enlarge the screen image.
Squeeze
Holding your thumb and forefinger against the screen
as you bring them together.
Use squeeze to reduce the size of the screen image.
IMPORTANT!
• Never use a pointed or hard object to perform screen operations. Doing so can
damage the screen.
• The camera will have a hard time interpreting a screen operation made using your
fingernails. Use the fleshy pad of your finger.
NOTE
• Applying a commercially available LCD protective sheet will reduce the operation
sensitivity of the monitor screen.

19 Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-150)
for power. Never try to use any other type of battery.
1. Open the frame (page 14).
2. Open the cover.
While depressing the [OPEN] button, slide
the cover in the direction of arrow
in the
nearby illustration.
3. Load the battery.
With the CASIO logo on the battery
upwards, load the battery into the
camera as shown in the illustration.
4. Close the cover.
• Positioning the cover about two millimeters from
the lens unit, keep it parallel with the camera as
you slide it in the direction of arrow
and then
arrow to secure it in place.
First, charge the battery prior to use.
Loading the Battery
2
3
1
[OPEN] button
CASIO logo
Battery
OK
NG
2
1
2mm
Lens unit

20 Quick Start Basics
To replace the battery
1. Press [p] (Power) to turn off the camera
and then open the battery cover.
2. Remove the current battery and load a new
one.
As shown in the illustration, pull up the edge of
the battery to remove it.
3. Close the battery cover.
IMPORTANT!
• The operation lamp (page 8) will flash green for some time after you press [ ] p
(Power) to turn off the camera. Never remove the battery while the operation lamp
is flashing green. Doing so can result in corruption or loss of data in camera
memory.

21 Quick Start Basics
You can use either of the two following methods to charge the battery. Before
charging the battery, use the procedure under “Opening and Closing the Frame”
(page 14) to open the frame.
• USB-AC adaptor
• USB connection to a computer (Using the included micro USB cable.)
.To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below.
Charging time: Approximately 2 hours 20 minutes
• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect
from the camera first.
Charge the Battery
3
2
1
USB-AC adaptor
u mark of the small (micro
USB) connector facing the side
opposite that of the monitor
screen.
[USB] port
Micro USB cable
(included with camera)

22 Quick Start Basics
IMPORTANT!
• A battery that has not been used for a long time and/or ambient temperature can
cause charging to take longer than normal. These conditions may also cause the
operation lamp to flash red. If this happens, refer to page 143.
• Pressing [p] (Power) while the USB-AC adaptor is connected to the camera will
turn on the camera with power being supplied by the battery. Because of this,
charging will stop.
• The USB-AC adaptor will become warm during charging. This is normal and does
not indicate malfunction.
• The shape of the power plug depends on each country or geographic area.
Operation Lamp Operation
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature, USB-AC
adaptor problem, or battery problem (page
143), or charging terminated by the timer
Off Charging complete
Operation lamp

23 Quick Start Basics
USB Cable Connection Precautions
• When connecting the USB cable to the camera, make sure that the cable
connector and monitor screen panel are oriented correctly as shown in the
illustration below.
• Make sure that you insert the cable connector into the USB port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Make sure that the u mark side of the
USB cable connector and the opposite side
of the monitor screen are facing in the same
direction. The opposite side of the
monitor screen
The operation lamp always initially light after charging starts. Even if the battery is
already fully charged, the lamp will light momentarily.
If the lamp does not light, check the orientation of the USB cable connector.

24 Quick Start Basics
.To charge using a USB connection to a computer
USB connection lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (
, ).
• If the camera is on, press [ ] (Power) to turn it off before connecting it to your p
computer.
Charging time: Approximately 2 hours 50 minutes
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
• A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take longer than normal. These
conditions may also cause the operation lamp to flash red. If this happens, refer to
page 143.
• For faster charging, use of the supplied USB-AC adaptor is recommended.
• You cannot use the camera to shoot images while it is being charged over a
computer USB connection. If you want to shoot with the camera, disconnect the
USB cable.
• If you turn on the camera while charging over a USB connection to a computer is in
progress, the camera will establish a USB connection with the computer. Though
charging normally should continue at this time, certain types of computers or
connection environments may stop charging if supply power is low. This will be
indicated by the camera’s operation lamp lighting green.
• Charging is not performed while the connected computer is in the hibernate mode.
USB
2
1
Micro USB cable
(included with camera)
u mark of the small (micro USB) connector facing the side
opposite that of the monitor screen.
[USB] port
USB port
Computer
(power turned on)

25 Quick Start Basics
Operation Lamp Operation
• The information in parentheses in the above table shows the lamp status while the
camera is turned on during charging.
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-150) without removing it from the camera. Never use any other type of
charger device. Attempting to use a different charger can result in unexpected
accident.
• This model can be charged only from a USB 2.0 specification USB port.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
Lamp Status Description
Lit Red,
(Lit/Flashing Amber) Charging
Flashing Red
Abnormal ambient temperature,
charging taking abnormally long, or
battery problem (page 143)
Off, (Lit Green) Charging complete
Operation lamp

26 Quick Start Basics
Checking the Current Battery Level
As battery power is consumed, a battery indicator on the monitor screen indicates its
current level as shown below.
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 20 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
119).
• See page 157 for information about battery life and number of shots.
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 120). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
Remaining Power High Low
Battery Indicator ***
Indicator Color White White* * Red Red*
Configuring Basic Settings the First Time You Turn On the
Camera

27 Quick Start Basics
1. Press [p] (Power) to turn on the camera.
This displays the startup screen.
2. Drag (page 18) upwards and downwards until
you find the language you want, and then touch
to select it.
3. Touch the date display format you want.
Example: July 10, 2017
YY/MM/DD * 17/7/10
DD/MM/YY * 10/7/17
MM/DD/YY * 7/10/17
4. Touch the value you want to change (year, month,
day, hour, minute).
5. Touch “ ”, “ ” to change the currently selected
value.
• To switch between 12-hour and 24-hour format, touch
the 12/24 hour switch icon.
6. When the date and time settings are the way you
want, touch “OK”.
7. Touch “Make-up”, “Auto”, or “Premium Auto Pro”
to specify the default power on recording mode.
8. Touch “Apply”.
• If you selected “Auto” in step 7, this is the end of this procedure.
• You will be able to change this setting later, if you want. See page 32 for
details.
9. Touch “OK”.
10.
Select the complexion setting you want.
11.
Touch “OK”.
• You will be able to change the complexion setting later, if you want. See page
49 for details.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 120
– Date and time: Page 119
[p] (Power)
12/24 hour switch
icon

28 Quick Start Basics
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 153.
– microSD Memory Card
– microSDHC Memory Card
– microSDXC Memory Card
• The above are supported memory card types as of November
2016.
• This camera supports use of microSD memory cards of the following types and
capacities: microSD memory cards up to 2GB; microSDHC memory cards greater
than 2GB, up to 32GB; microSDXC memory cards greater than 32GB, up to 2TB.
Note that the ability to use any particular card with this camera, even if it satisfies
the above capacity and type requirements, is not guaranteed.
.Memory Card Handling Precautions
Certain types of memory cards can slow down processing speeds. In particular, high-
quality movies may not be able to be stored correctly. A slow memory card can take
too much time to record data and result in breaks in the image and/or audio during
playback. When this happens the movie icon will turn yellow on the monitor screen.
Preparing a Memory Card
Supported Memory Cards
Warning!
0Memory cards are small and present a risk of accidentally being swallowed
by infants and young children. Keep memory cards out of the reach of
infants and young children. If a memory card is ever swallowed accidentally,
contact a physician immediately.
+
*

29 Quick Start Basics
1. Press [p] (Power) to turn off the
camera and then open the frame
(page 14).
2. While holding down [OPEN], slide
the cover in the direction of arrow
in the nearby illustration to
remove it.
3. Load a memory card.
Positioning the memory card as shown in
the nearby illustration insert it into the
camera’s memory card slot and press
until you hear it click into place.
4. Close the cover.
• Positioning the cover about two millimeters from
the lens unit, keep it parallel with the camera as
you slide it in the direction of arrow
and then
arrow to secure it in place.
IMPORTANT!
• Never insert anything besides a supported memory card (page 28) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, and contact your retailer or nearest CASIO authorized service center.
To load a memory card
2
3
1
[OPEN] button
Front
Front Back
2
1
2mm
Lens unit

30 Quick Start Basics
.To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly.
Pull the card out the rest of the way and then insert
another one.
IMPORTANT!
• Turn off the camera before replacing the memory
card.
• The operation lamp (page 8) will flash green for some time after you press [ ] p
(Power) to turn off the camera. Never remove the memory card while the operation
lamp is flashing green. Doing so can cause the image save operation to fail and
even damage the memory card.
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1. Load a memory card (page 29).
2. Turn on the camera and then touch “ ” (Show Icons).
3. Touch “MENU”.
4. Drag upwards and downwards until you find “Setup”, and then touch it.
5. Touch “Format”.
6. Touch “Format” and then touch “Yes”.
This starts the memory card format operation.
To format (initialize) a new memory card

31 Quick Start Basics
.To turn on the camera
Press [p] (Power).
This will turn on the camera, which is
indicated when the operation lamp lights
green, and enter the REC mode.
IMPORTANT!
• The camera will not turn on when you
press [p] (Power) while it is being
charged over a computer USB
connection (page 24).
.To enter the REC mode and PLAY mode
.To turn off the camera
Press [p] (Power).
NOTE
• To conserve battery power, an Auto Power Off function will turn off power
automatically if you do not perform any operation for about five minutes.
Turning Power On and Off
To enter the
PLAY mode
In the REC mode, touch “ ” (PLAY).
• If “ ” (PLAY) is not displayed on
the screen, you can touching the
Review image (page 71), or switch
to the PLAY mode by touching
“ ” (Show Icons) and then
touching “ ” (PLAY).
To enter the
REC mode
In the PLAY mode, touch “ ”
(Show Icons). On the screen image
that appears, touch “ ” (REC).
[p] (Power)
Operation lamp
“ ”
(Show Icons)
Screen after “ ”
(Show Icons) is touched
“ ” (PLAY) / “ ” (REC)

32 Quick Start Basics
Your camera has a variety of different recording modes to suit various shooting
conditions and objectives (page 40). This section explains general shooting
procedures using the auto recording mode.
You can select one of two auto recording modes (Auto or Premium Auto Pro)
according to your digital imaging needs.
1. Press [p] (Power) to turn on the camera.
2. Touch “ ” (Show Icons).
3. Touch the second icon from the right (second
icon from the top in the case of landscape
orientation) (Recording mode).
4. Touch “Auto” or “Premium Auto Pro” to select
the auto recording mode you want.
To Shoot a Snapshot
Selecting an Auto Recording Mode
Setting
REC Screen
Icon Display
Description
Auto This is the standard Auto recording mode.
Premium
Auto Pro
With Premium Auto Pro recording, the camera
automatically determines whether you are shooting a
subject or scenery, and other conditions. Premium
Auto Pro recording delivers higher image quality than
standard Auto recording.
• Some of the settings configured automatically by
Premium Auto Pro cannot be changed by you.
• It also requires more power (and runs down the
battery quicker) than Auto.
Recording mode icon

33 Quick Start Basics
1. Point the camera at the subject.
If you are using Premium Auto Pro, text will appear on the
monitor screen describing the type of shot the camera has
detected.
• Spread your fingers apart on the screen to change the
zoom factor (page 46).
2. Half-press the shutter button to focus the
image.
When focus is complete, the camera will beep, the
operation lamp will light green, and the focus frame
will turn green.
To shoot a snapshot
When you half-press the shutter button, the camera
automatically adjusts exposure and focuses on the
subject it is currently pointed at. Mastering how
much pressure is required for a half-press and a
full-press of the shutter button is an important
technique for good-looking images.
Type of shot
+ (Telephoto) – (Wide Angle)
Focus frame
Operation lamp
Shutter button
Half-press
Press lightly until
the button stops.
Beep, beep (Image is in focus.)

34 Quick Start Basics
3. Continuing to keep the camera still,
press the shutter button the rest of
the way down.
This records the snapshot.
NOTE
• You also can shoot a snapshot by touching a point on the monitor screen (page
63).
• You can specify the image size for snapshots. See page 66 for more information.
.If the image does not focus...
If the focus frame stays red and the operation lamp is flashing green, it means that
the image is not in focus (because the subject is too close, etc.). Re-point the camera
at the subject and try to focus again.
.Shooting with Auto
“Focus lock” (page 71) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
Recording a Movie
Touch “ ” (Movie) to start movie recording. Touch
“ ” (Movie Stop) to stop recording.
See page 50 for details.
Full-press
Snap (Image is recorded.)
“ ” (Movie)/
“ ” (Movie Stop)

35 Quick Start Basics
.Shooting with Premium Auto Pro
• Some menu items are not available while Premium Auto Pro is in use (page 62).
Only the menu items whose settings can be configured will be displayed on the
menus while Premium Auto Pro is in use.
• In addition to shutter speed and ISO sensitivity, the camera automatically executes
the following operation as required when shooting with Premium Auto Pro.
– Auto Focus is normally performed until you half-press the shutter button.
– The camera automatically determines the focus point on the screen and focuses
there.
– When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
• When shooting with Premium Auto Pro, the message “Processing Premium Auto.”
may appear on the monitor screen. If you feel the camera is taking too long to
process data, try shooting with standard Auto instead.
• In some cases, Premium Auto Pro may not be able to interpret the shooting
environment correctly. If this happens, shoot with standard Auto.
• If “Š” is displayed, the camera will shoot a series of CS images and merge them
into a final image. Take care to avoid any camera and subject movement until
shooting of all of the CS images is complete.
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 73.
1. Touch “ ” (PLAY) to enter the PLAY mode.
This will display one of the snapshots currently stored in
memory.
• If “Type 2” is selected for the “Review” setting (page
71), touch the Review image on the monitor screen.
• You can display and delete information about the
displayed snapshot as required (page 115).
• To zoom in on a displayed image, tap the monitor
screen twice in succession (page 76).
If you are recording a snapshot that is very important to
you, it is recommended that you zoom the image and
check its details after recording it.
Viewing Snapshots
“ ” (PLAY)

36 Quick Start Basics
2. Drag left or right across the screen image to scroll through the
snapshots.
• To scroll forward or back multiple images, first drag in the direction opposite
the direction you want to scroll, and then flick in the desired scroll direction.
NOTE
• Pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
• A question mark (?) will be displayed for images that cannot be displayed for some
reason.
If memory becomes full, you can delete snapshots and movies you no longer need in
order to free up storage and record more images.
IMPORTANT!
• Remember that a file (snapshot and movie) delete operation cannot be undone.
.To delete a single file
1. In the PLAY mode, drag left or right to display the file you want to
delete.
2. Touch “ ” (Show Icons).
3. Touch “ ”.
4. Touch “Delete 1 File”.
This will delete the selected image.
Deleting Snapshots and Movies

37 Quick Start Basics
.To delete specific files
1. Enter the PLAY mode.
2. Touch “ ” (Show Icons).
3. Touch “ ”.
4. Touch “Delete Files”.
This displays a file selection screen.
5. Touch a file you want to delete.
This will select the check box of the selected file’s image.
• To clear (deselect) a check box, touch the applicable file.
6. After you are finished selecting files, touch “OK” or “ ”.
7. Touch “Delete”.
This deletes the files you selected.
• To cancel the delete operation, touch “Cancel”.
NOTE
• You can also delete images using the image menu (page 76).
.To delete all files
1. Enter the PLAY mode.
2. Touch “ ” (Show Icons).
3. Touch “ ”.
4. Touch “Delete All Files”.
5. Touch “Delete”.
This will cause the message “There are no files.” to appear.

38 Quick Start Basics
Operation
• If unwanted light is shining onto the lens, shade the lens with your hand when
shooting an image.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded in accordance with the currently selected recording mode
(page 40).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Other Precautions
• A noise reduction process is performed when ISO sensitivity is set to a high value.
This can cause the camera to take relatively longer to be ready to shoot again after
you press the shutter button. Do not perform any operation while the image
recording operation is in progress.
• Due to the characteristics of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
.Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
• If you cannot focus properly while shooting with Auto recording mode, try using
focus lock (page 71).
Snapshot Shooting Precautions

39 Recording Images
Recording Images
Touching the monitor screen in the REC mode will display a screen for configuring
REC mode settings.
.To configure REC mode settings
2. Touch “ ” (Show Icons).
3. Touch the item whose setting you want to change.
1. Press [p] (Power) to turn on the camera and
enter the REC mode.
• If the camera is in the PLAY mode, touch “ ” (REC)
to enter the REC mode.
Menu (page 62)*
Recording mode (page 40)
Wireless mode (page 87)
Selfie Art (page 45)
PLAY mode (page 31)
Movie (page 50)
LED light (page 48)
*Depending on the recording mode, some of the items on the menu that
appears may not be usable.
[p] (Power)
6 7
145 3 2

40 Recording Images
The camera has a variety of different recording modes.
1. In the REC mode, touch the “ ” (Show
Icons).
2. Touch the recording mode icon.
3. Touch the icon of the recording mode you want to
use.
This enters the selected recording mode.
Selecting a Recording Mode
Auto Standard Auto recording mode. This is the mode normally
used for shooting (page 32).
Premium Auto
Pro
With Premium Auto Pro recording, the camera
automatically determines whether you are shooting a
subject or scenery, and other conditions. Premium Auto
Pro recording delivers higher image quality than standard
Auto recording mode (page 32).
Make-up Makes it easier to shoot beautiful portraits. Skin tone and
texture can be adjusted while shooting (page 41).
Instant Movie Movie recording can be paused and resumed as required
to create a short movie (page 53).
BEST SHOT
With BEST SHOT, simply select the sample scene that
resembles the type of shot you want, and the camera
automatically configures ideal settings for the subject and
shooting conditions (page 56).
Art Shot
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting (page
42).
Posing Shot Posing Shot lets you shoot five successive snapshots, as
the camera provides voice guidance (page 44).
Recording mode icon

41 Recording Images
Make-up enables adjustment of human skin tone hues and texture, and softening of
facial shadows caused by harsh sunlight for better looking portraits.
1. In the REC mode, touch the “ ” (Show Icons).
2. Touch the recording mode icon.
3. Touch “ ” (Make-up).
This will enter the Make-up mode.
4. Touch “ ” (Make-up) that appears on the monitor screen.
5. Touch the item whose setting you want to
change, and then adjust it.
6. Touch “OK”.
7. Press the shutter button to shoot.
NOTE
• Make-up can also be used with other recording modes
besides Make-up Mode. The Make-up icon “ ” will appear
on the monitor screen when the current recording mode
supports use of the Make-up function (page 49).
Recording Beautiful Portraits (Make-up)
Smooth Skin Adjusts skin smoothness.
Skin Tone Adjusts the complexion setting.
Face
Brightness Adjusts face brightness.
Sculpt Adjusts detail enhancement.
Dark Circles
Remover Lessens under-eye circles.
Slim Face Makes a face slim.
“ ” (Make-up)

42 Recording Images
A variety of artistic effects help to make even common, ordinary subjects become
more novel and exciting.
1. In the REC mode, touch the “ ” (Show Icons).
2. Touch the recording mode icon.
3. Touch “C” (Art Shot).
4. Touch the Art Shot scene you want to use.
• Touch “ ”, “ ” to display another scene.
Shooting with Artistic Effects (Art Shot)
Scene Description
HDR Art Uses HDR (High Dynamic Range, page 60) to turn normal
images into works of art.
Crystal Ball Creates a mysterious effect by placing the image in a bubble
floating in midair.
Sparkling Shot Softens the overall image and adds points of light for a
sparkle effect.
Toy Camera Dark edges and altered hues make images look like they
were shot by a toy camera.
Soft Focus Overall blurring for a soft and romantic effect.
Light Tone Weakened contrast for a feeling of airy refinement.
Pop Enhanced saturation makes colors stand out in with rich
clarity.
Sepia Sepia tones create a decidedly retro look.
Monochrome All of the strong contrast and graininess of a black and white
print.
Miniature Partial blurring makes scenes look like they are from of a
miniature world.
Fisheye A fisheye lens effect can be used to create a variety of
humorous images.

43 Recording Images
5. Touch the “ART” icon.
The intensity of the selected effect can be adjusted as described below. Note,
however, that the “Miniature” effect cannot be adjusted.
6. Touch the level you want to select.
7. Touch “OK”.
8. Press the shutter button to shoot.
NOTE
• With the HDR Art scene, the settings below are configured automatically.
– LED: Off
• The image range of certain scenes is narrower than normal.
• The desired effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this REC mode may not
be able to produce the desired result.
• Movie recording is disabled while shooting with Art Shot.
• Sample images shown on Art Shot scene screens were not shot with this camera.
• An image shot with an Art Shot scene cannot be converted to a normal image
without the Art Shot effect.
Scene Adjustment
HDR Art Effect level
Crystal Ball Effect type
Sparkling Shot Effect type
Toy Camera Hue
Soft Focus Effect level
Light Tone Hue
Pop Effect level
Sepia Effect level
Monochrome Effect level
Fisheye Effect level

44 Recording Images
Posing Shot lets you shoot five successive snapshots, as the camera provides voice
guidance for each. This lets you strike a pose for each individual shot.
1. In the REC mode, touch the “ ” (Show Icons).
2. Touch the recording mode icon.
3. Touch “ ” (Posing Shot).
4. Press the shutter button to start recording.
Shoot in accordance with the voice guidance from the camera.
NOTE
• To adjust the volume of the voice guidance, use the “Posing Vol” setting under
“Sounds” (page 116).
• To interrupt an ongoing Posing Shot operation, press the shutter button or touch
the monitor screen.
• Note that preview images are not displayed when shooting with this function.
.Changing the Voice Guidance Type
You can use the procedure below to select one of five types for the voice guidance
that sounds while you are shooting.
1. Touch “ ” (Pattern).
2. Touch the number of the voice guidance you want to use.
This will cause the corresponding voice to sound.
3. After selecting the voice guidance type you want to use, touch “OK”.
Shooting with Posing Shot (Posing Shot)

45 Recording Images
With make-up functions (pages 41, 49), you can make
adjustments to skin color and skin smoothness for stunning
portrait images. The following image types are also available:
Elegant, Foggy, Fairy, Nostalgic, Vivid, Square.
1. On your camera, enter the REC mode and then touch
“ ” (Show Icons).
2. Touch the “ ” icon.
This displays a menu of Selfie Art scenes.
3. Select the scene you want to use and touch “OK”.
.Square Image Sizes
You can shoot a square snapshot with an aspect ratio of 1:1 by
selecting “Square” for Selfie Art.
Image sizes selected with the “Image Size” setting (page 66) are
changed as shown below.
12M * 8M (2976x2976 pixels)
3M * 2M (1536x1536 pixels)
Shooting a Selfie with Distinctive Effects (Selfie Art)

46 Recording Images
Your camera is equipped with various types of zoom: HD Zoom, SR Zoom, and digital
zoom. The maximum zoom factor depends on the image size setting.
1. Perform the required screen operation to change the zoom factor as
desired.
Zoom in: Spread
Zoom out: Squeeze
2. Press the shutter button to shoot the image.
NOTE
• Telephoto images are prone to blurring caused by camera movement when you
press the shutter button. Because of this, stabilizing the camera by placing it on a
level surface, etc. is recommended.
• Zoom operations are disabled during high speed movie recording. Perform the
zoom operation before you touch “ ” (Movie) to start recording.
• “Ù” is displayed on the monitor screen while digital zoom is being used.
Shooting with Zoom
HD Zoom
Allows greater zoom capabilities by cutting out a portion of the
original image and enlarging it, without deterioration of image
quality.
SR Zoom Applies super resolution technology to suppress image
deterioration.
Digital zoom A digital process is used to enlarge the center of the image, so
there is deterioration of image quality.
Telephoto : Enlarges the subject and narrows the range.
Wide Angle : Reduces the size of the subject and broadens the range.
Telephoto Wide Angle

47 Recording Images
.Zoom Factor
• The image deterioration point depends on the image size (page 66). The smaller
the image size, the higher the zoom factor you can use before reaching the image
deterioration point.
While the camera is configured so the monitor screen and lens
are facing in the same direction, you can use a special self-
portrait timer (Selfie Timer) to shoot a self-portrait while
composing the image on the screen.
• When using the selfie timer to shoot a self-portrait, select
one of the following recording modes.
– Auto
– Premium Auto Pro
– Make-up
– Selfie Art
1. Rotate the monitor screen panel so the screen is
facing in the same direction as the lens (page 14).
2. Select one of the above as the recording mode.
3. Drag “ ” (Selfie Timer) downwards to specify
the selfie timer countdown duration.
The camera will shoot an image when the countdown
reaches zero.
• You can set a selfie timer countdown duration within
the range of two to ten seconds. The further you drag,
the longer the duration.
• To cancel an ongoing countdown, touch anywhere on
the screen except where the selfie timer icon is
displayed or press the shutter button.
Image Size Undeteriorated
Zoom Limit
Maximum
Zoom Factor
12M 1.5X 4.0X
3M 2.9X 7.8X
Shooting a Self-portrait (Selfie timer)
Monitor screen
Lens
“ ” (Selfie Timer)

48 Recording Images
Use the LED light when shooting where lighting is dim. The effectiveness of the LED
light is reduced the further you are from the subject.
1. Enter the REC mode.
2. Touch “ ” (LED).
Each touch of the “ ” (LED) icon cycles between the settings below.
IMPORTANT!
• Do not turn on the LED light near a person’s eyes and do not allow anyone to look
directly into the light.
• You should compose the image so the main subject is in the center of the image
when using the LED light.
• Since the camera is equipped with a wide-angle lens, the center tends to be
brighter while the periphery tends to be darker.
• LED light is disabled while shooting with the following feature.
– Following BEST SHOT scenes
Triple Shot, HDR, HS Night Scene
– Following Art Shot scene
HDR Art
Using the LED Light (LED)
Setting
REC Screen
Icon Display
Description
Auto The LED light turns on automatically when
surroundings are dark.
On LED always lights when shooting.
Off LED never turns on or fires.

49 Recording Images
When “ ” (Make-up) appears on the monitor screen while you
are shooting, you can adjust the skin tone and texture of your
subject.
• Make-up can be used with the recording modes listed below.
– Premium Auto Pro
– Make-up
– Posing Shot
– Following BEST SHOT scenes
Motion Shutter, HS Night Scene Portrait, Triple Shot
– Selfie Art
– Instant Movie
1. Touch “ ” (Make-up) that appears on the monitor screen.
This displays the “Smooth Skin” setting screen.
2. Touch the item whose setting you want to
change, and then adjust it.
3. Touch “OK”.
4. Press the shutter button to shoot.
Adjusting Skin Tone and Texture
Smooth Skin Adjusts skin smoothness.
Skin Tone Adjusts the complexion setting.
Face
Brightness Adjusts face brightness.
Sculpt Adjusts detail enhancement.
Dark Circles
Remover Lessens under-eye circles.
Slim Face Makes a face slim.
“ ” (Make-up)

50 Recording Movie
Recording Movie
The following procedure explains how to record a movie.
• You can record a movie while one of the following recording modes is selected.
– Auto
– Premium Auto Pro
– Make-up
– Following BEST SHOT scenes
HS Night Scene, HS Night Scene Portrait, Food, Nails
– Instant Movie (page 53)
1. In the REC mode, touch “ ” (Show Icons).
2. Touch “MENU”.
3. Drag upwards and downwards until you find “Movie Quality”, and then
touch to select it.
4. Touch the item whose setting you want to change.
5. To close the menu screen, touch “MENU” or press the shutter button.
To record a movie
Movie
Quality
REC Screen
Icon Display
Frame
Rate
Image Size
(Pixels) Description
Full HD 30fps 1920x1080
Select this setting to record full
high-definition (Full HD)
movies. The aspect ratio of
movies recorded with this
setting is 16:9.
HD 30fps 1280x720
Select this setting to record
high-definition (HD) movies.
The aspect ratio of movies
recorded with this setting is
16:9.
HS240 240fps 512x384
Select this setting to record
high speed movies at a speed
of 240 fps.
• Audio is not recorded.

51 Recording Movie
6. Touch “ ” (Movie).
This will start recording.
• Monaural audio is also recorded during movie
recording while “Full HD” or “HD” is selected for
the movie quality setting.
• Touching “o” while recording is in progress
will cause the remaining recording time and “R”
to appear. Touch “o” again to switch back to
the elapsed recording time.
• Except for High Speed Movie, zoom operations
are supported during movie recording (page
46). Zoom is disabled during high speed movie
recording. If you want to use zoom, perform the
zoom operation before you touch “ ” (Movie)
to start recording.
• When “Macro” is selected as the movie focus mode (page 70), you can half-
press the shutter button before starting recording to focus.
7. Touch “ ” (Movie Stop) to stop recording.
• Each movie can be up to 4GB or 29 minutes long. Movie recording stops
automatically after 29 minutes of recording. Movie recording also will stop
automatically if memory becomes full before you stop movie recording.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
Full HD and HD movie recording. Note, however, that this does not prevent image
blur due to subject movement.
High Speed Movie Recording Precautions
• When shooting a high speed movie, shoot in a well-lit environment.
• When recording a high speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
“ ” (Movie)/
“ ” (Movie Stop)
Recording time/
Remaining recording time

52 Recording Movie
IMPORTANT!
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction. The
camera may automatically adjust its monitor screen brightness in order to reduce
heat generation.
• The camera also records audio along with Full HD and HD
movies. Note the following points when shooting a movie.
– Take care that the microphone is not blocked by your
fingers, etc.
– Good audio recording results are not possible when the
camera is too far away from what you are trying to
record.
• Shooting movies for long periods in areas where
temperature is relatively high can cause digital noise (dots of light) to appear in the
movie image. A rise in the camera’s internal temperature also may force movie
recording to stop automatically. If this happens, stop recording and allow the
camera to cool down, which should cause normal operation to resume.
• Use of the camera’s built-in memory or certain types of memory cards can slow
down processing speeds. In particular, high-quality movies may not be able to be
stored correctly. A slow memory card can take too much time to record data and
result in breaks in the image and/or audio during playback. When this happens the
movie icon will turn yellow on the monitor screen.
NOTE
• SR Zoom (page 46) is disabled during movie recording.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, stabilizing the camera
by placing it on a level surface, etc. is recommended.
Microphone

53 Recording Movie
Movie recording can be paused and resumed as required to create a short movie
quickly and easily.
1. Enter the REC mode.
2. Touch “ ” (Show Icons) and then touch “MENU”.
3. Drag the screen upwards and downwards until you find “Instant
Movie”, and then touch to select it.
4. Touch the screen and configure the “Movie Quality” and “Length”
settings.
5. To close the menu screen, touch “MENU”.
NOTE
• You may not be able to record up to the specified movie length if remaining
memory capacity is too low.
Shooting a Movie of Short Clips (Instant Movie)
Configuring Recording Settings
Movie Quality Select one of the following quality settings:
Full HD (1920x1080), HD (1280x720), STD (640x480).
Length Select one of the following shooting time settings:
60 sec, 15 sec, 10 sec, 6 sec.

54 Recording Movie
1. In the REC mode, touch “ ” (Show Icons).
2. Touch the Recording mode icon.
3. Touch “ ” (Instant Movie).
4. Touch-and-hold “ ” (Recording).
Movie recording is performed as long as “ ” (Recording) is held, or until the
shooting time you selected under “Configuring Recording Settings” elapses.
• Releasing “ ” (Recording) pauses movie recording. Touching and holding
“ ” (Recording) again resumes movie recording.
Shooting the Movie
Before recording Recording Recording paused

56 Using BEST SHOT
Using BEST SHOT
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
.To shoot an image with BEST SHOT
1. In the REC mode, touch “ ” (Show Icons).
2. Touch the recording mode icon.
3. Touch “b” (BEST SHOT).
This will display a menu of BEST SHOT scenes.
4. Touch the scene you want to select.
5. Press the shutter button (if you are shooting a snapshot) or touch
“ ” (Movie) (if you are shooting a movie).
• With some BEST SHOT scenes, the message “Busy... Please wait...” will
appear on the monitor screen after you press the shutter button. The camera is
in the process of recording an image until the message appears. Keep the
camera still. The image processing operation takes some time to complete
after the message appears. You will not be able to record another image while
the message is displayed.
.BEST SHOT Precautions
• BEST SHOT scene images were not shot using this camera.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• Movie recording can be performed while one of the BEST SHOT scenes below is
selected. Note that if “HS240” is selected for the movie quality setting, movies will
be recorded using the auto recording “Auto” setting.
HS Night Scene, HS Night Scene Portrait, Food, Nails

57 Using BEST SHOT
With Motion Shutter the camera automatically triggers a self-timer countdown
whenever it detects subject movement within an icon you specify on the monitor
screen. This means you can control operation of the self-timer from a distance by
waving your hand, so you can include yourself in the image being shot.
1. Select “ ” (Motion Shutter) scene (page 56).
2. Drag the start self-timer icon “ ” and preview icon “ ” to the
location in the image where you want movement to be detected.
• Keep the two icons separate from each other. Whenever you move an icon to a
location where it overlaps the other icon, the other icon will move out of the way
automatically.
3. When everything is ready, press the shutter button
all the way down.
• About three seconds after you press the shutter button,
the camera will go into standby. This will cause the self-
timer icon “ ” to appear.
4. Facing the camera, move your hand or perform
some other movement in the area of the start self-
timer icon you positioned in step 3.
When the camera detects subject movement within the icon, it will automatically
start a self-timer countdown. The camera will shoot an image when the
countdown reaches zero, and then go back into Motion Shutter standby to wait
for the next trigger movement.
NOTE
• The trigger time of the Motion Shutter self-timer is fixed at two seconds.
• The preview icon “ ” will appear on the monitor screen when a snapshot is shot.
When the camera detects movement within the preview icon, it will display the
image that was shot for three seconds.
• Motion Shutter exits standby automatically after it shoots six images.
• To cancel Motion Shutter standby at any time, press the shutter button or touch the
monitor screen.
• The Motion Shutter may not operate properly when there is little difference
between the subject and the background of the icon, or when the subject is located
far away from the camera.
Using Motion Shutter to Trigger a Self-timer Operation
(Motion Shutter)

58 Using BEST SHOT
With High Speed Night Scene, the camera automatically detects shooting conditions.
When you press the shutter button, the camera will record a burst of images and
merge them in a way that minimizes image blur due to low light conditions.
1. Select “HS Night Scene” scene (page 56).
2. When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• Movement of the camera while it is placed on a surface may cause erroneous
judgment that it is hand held.
• If surroundings are extremely dark when shooting with “HS Night Scene”, the
camera may not be able to shoot at proper brightness due to insufficient exposure.
• When shooting with this BEST SHOT scene, the ISO sensitivity setting is fixed at
“Auto”.
Shooting with High Speed Night Scene (HS Night Scene)

59 Using BEST SHOT
1. Select “HS Night Scene Portrait” scene (page 56).
2. When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the LED light setting automatically becomes “Auto”.
• When holding the camera by hand while shooting with this BEST SHOT scene,
make sure that the subjects remain as still as possible as the camera shoots the
series of images.
• Movement of the camera while it is placed on a surface may cause erroneous
judgment that it is hand held.
• If surroundings are extremely dark when shooting with this BEST SHOT scene, the
camera may not be able to shoot at proper brightness due to insufficient exposure.
• When shooting with this BEST SHOT scene, the ISO sensitivity setting is fixed at
“Auto”.
1. Select “Food” scene (page 56).
2. When you are ready to shoot, press the shutter button.
1. Select “Nails” scene (page 56).
2. When you are ready to shoot, press the shutter button.
Shooting with High Speed Night Scene and Portraits
(HS Night Scene Portrait)
Shooting Beautiful Food Images (Food)
Shooting Beautiful Nail Art Images (Nails)

60 Using BEST SHOT
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. Select “HDR” scene (page 56).
2. Press the shutter button to shoot.
NOTE
• This function works best when the camera is made stationary by placing it on a
level surface, etc.
• With this BEST SHOT scene, the LED light setting automatically becomes off.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
Digitally Correcting for Overexposure and Underexposure
(HDR)

61 Using BEST SHOT
Triple Shot shoots a burst of three images and stores them in memory. This feature is
great for making sure you don’t miss those special moments when kids are around.
1. Select “Triple Shot” scene (page 56).
2. Point the camera at the subject and then half-press the shutter button.
The camera will start pre-recording images at this time.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the images currently in the pre-record buffer will be deleted.
3. Press the shutter button all the way down to record.
This will record three images: one at the point the shutter button is fully pressed,
one before the point the shutter button is fully pressed, and one after the point the
shutter button is fully pressed.
• Pressing the shutter button all the way without first half-pressing it will result in
only two images being recorded.
NOTE
• The following functions cannot be used with this function.
Touch Shutter, Self-timer, LED Light
• “Type 1” cannot be selected for the “Review” setting while shooting with this
function. If “Type 1” is selected in another mode, selecting the “Triple Shot” scene
will cause the “Review” setting to change to “Type 2”.
Shooting with Triple Shot

62 Advanced Recording Settings
Advanced Recording Settings
The following are menu operations you can use to configure various camera settings.
. Example Menu Screen Operation
1. In the REC mode, touch “ ” (Show Icons).
2. Touch “MENU”.
This will display the menu screen.
• Menu contents are different in the REC mode and PLAY
mode.
3. Drag upwards and downwards until you find the
item whose setting you want to change.
4. Touch the item.
5. Configure the setting of the item in accordance with the screen
contents.
• To cancel and exit the menu, touch “MENU” or press the shutter button.
NOTE
• Depending on the recording mode, some of the items on the menu that appears
may not be usable. While Premium Auto Pro is in use, only the menu items whose
settings can be configured will be displayed on the menus.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Using the REC Menu
Procedure
Enter the REC Mode * MENU * Touch Shutter

63 Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * Touch Shutter
You can use the procedure below to shoot a snapshot.
1. Touch “On”.
2. Point the camera at the subject.
3. When you want to shoot, touch the monitor screen.
The camera automatically comes into focus and then shoots.
• You can still use the shutter button to shoot even when “On” is selected for
Touch Shutter.
NOTE
• When “Auto” is selected as the recording mode, the camera will automatically focus
on the point you touch.
• When “Premium Auto Pro” is selected as the recording mode, the camera will
automatically determine the optimum focus point(s) and focus automatically.
Procedure
Enter the REC Mode * MENU * Instant Movie
You can configure movie quality and recording time settings when shooting with
Instant Movie. See page 53 for details.
Using Touch Shutter (Touch Shutter)
Editing a Movie as You Shoot It (Instant Movie)

64 Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * L/R Flip Shot
Shooting a snapshot while “On” is selected for this function, an image of what is
displayed on the monitor screen is saved in memory. This function can be used only
when the monitor screen and lens are facing in the same direction.
NOTE
• L/R flipping is not performed during movie recording.
• Images already stored in camera memory cannot be L/R flipped.
Procedure
Enter the REC Mode * MENU * Lightness Priority
Use this setting to specify how the camera should handle shooting in dark locations.
• Lightness priority is disabled while shooting with the following feature.
– Movie recording
– Instant Movie
– Following BEST SHOT scenes
Triple Shot, HDR, HS Night Scene
– Following Art Shot scene
HDR Art
Horizontally Flipping the Recording Image (L/R Flip Shot)
Shooting in a Dark Location (Lightness Priority)
On Enables shooting with overall brightness. Guard against
camera movement.
Off Reduces blur due to camera movement.

65 Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
• You can interrupt an ongoing Self-timer countdown by pressing the shutter button
or touch the monitor screen.
NOTE
• The Self-timer cannot be used under the following conditions.
– Posing Shot (page 44)
– Triple Shot (page 61)
– Motion Shutter (page 57)
– When the monitor screen and lens are facing in the same direction
Using the Self-timer (Self-timer)
Setting
REC Screen
Icon Display
Description
10 sec 10-second Self-timer
2 sec
2-second Self-timer
• When shooting under conditions that slow down the
shutter speed, you can use this setting to prevent
image blur due to camera movement.
Off None Self-timer is disabled.

66 Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * Image Size
This setting can be used to configure snapshot image size.
• The initial factory default image size setting is 12M (12 million pixels).
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
• This function cannot be used while “Square” is selected for the Selfie Art setting
(page 45).
. Pixels and image size
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size)
through a print service, attaching an image to
e-mail, when viewing the image on a
computer, etc.
The size of an image indicates how many
pixels it contains, and is expressed as horizontal pixels xvertical pixels.
• Note that larger images have more pixels, so they take up more memory space.
• For information about image size and number of images that can be stored, see
page 153.
• For information about movie image size, see page 154.
• For information about resizing existing snapshots, see page 82.
Changing the Image Size (Image Size)
Image Size
(Pixels)
REC Screen
Icon Display
Suggested Print
Size and
Application
Description
12M
(4000 x3000) Poster Print
Good detail for better clarity even
for images cropped from the
original on a computer, etc.
3M
(2048 x1536) 3.5"×5" Print
Best when preserving memory
capacity is relatively more
important than image quality.
Pixel

67 Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * Movie Quality
This setting can be used to configure movie image quality settings and to select either
normal movie recording or High Speed Movie recording. For information about movie
image quality settings, see page 50.
Procedure
Enter the REC Mode * MENU * Brightness
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1. Touch a level you want to set.
• To cancel exposure compensation, change the EV value to 0.0.
2. Touch “OK”.
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Movie Image Quality Settings (Movie Quality)
Correcting Image Brightness (Brightness)
Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.

68 Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * White Balance
The white balance setting lets you make adjustments to match the light source being
used so subject coloring is more natural. You can make adjustments to avoid the blue
cast that can occur when shooting on a cloudy day, the green cast that can occur
while shooting under white fluorescent lighting, etc.
1. Touch the type of white balance you want to select.
You can see the affect of the white balance setting you select on the monitor
screen.
• When “ ‡Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.).
Adjusting White Balance (White Balance)
Setting Description
Auto WB Configures the camera to adjust white balance
automatically
Daylight For shooting outdoors on a clear day
Overcast For shooting outdoors on an overcast rainy day, in the
shade, etc.
Shade For shooting on a clear day in the shade of trees or
buildings
Day White Fl. For shooting under white or day white fluorescent
lighting
Daylight Fluor For shooting under daylight fluorescent lighting
Tungsten For shooting under light bulb lighting
Manual WB
For configuring the camera manually to suit a particular
light source.
Touch “· Manual WB”.
In the location where you plan to
shoot, point the camera at a
blank white piece of paper so it
fills the entire monitor screen.
Touch an area of the screen
where no icon is located.
The white balance setting is retained even if you turn
off the camera.
‡
¤
'
“
†
–
«
·
Blank white paper

69 Advanced Recording Settings
2. Touch “OK”.
Procedure
Enter the REC Mode * MENU * ISO
ISO sensitivity is a measure of sensitivity to light.
• Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take relatively
longer for the camera to finish recording an image after it is shot. You will not be
able to perform any operation while image recording is in progress.
Specifying ISO Sensitivity (ISO)
Setting Description
Auto Adjusts sensitivity automatically according to conditions
ISO 80 Lower
sensitivity
Higher
sensitivity
Slow shutter speed
Fast shutter speed (Set
for shooting in dimly lit
areas.)
Less noise
Some coarseness
(increased digital noise)
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200

70 Advanced Recording Settings
Procedure
Enter the REC Mode * MENU * Focus
Changing to a different focus mode can help to achieve better focus.
*1 The focus range is the distance from the lens surface.
*2 Focus remains fixed at the position where it was when recording started. To focus
an image, half-press the shutter button to focus before fully pressing the shutter
button to start recording.
Selecting a Focus Mode (Focus)
Settings
REC Screen
Icon Display
Type of Shot Focus Mode Approximate Focus Range
*
1
Snapshot SnapshotMovies Movies
AF
(Auto
Focus)
None
General
recording Automatic
Fixed
focal point
8 cm to
9
(infinity)
(3.1"
to
9
)
52 cm to
9
(infinity)
(20.5"
to
9
)
Macro
Close ups 8 cm to 50 cm
(3.1" to 19.7")
8 cm to 50 cm
(3.1" to 19.7")
*
2
PF (Pan
Focus)
Shooting
with a
relatively
wide focus
range
Fixed
focal point
1 m to
9
(infinity)
(3.3'
to
9
)
52 cm to
9
(infinity)
(20.5"
to
9
)
Infinity
Scenery and
other distant
subjects
Fixed Infinity (Wide Angle)

71 Advanced Recording Settings
. Using Focus Lock
“Focus lock” is a technique you can use when you want
to compose an image in which the subject you want to
focus on is not within the focus frame in the center of
the screen.
1. Align the monitor screen’s focus frame with
the subject you want to focus on and then
half-press the shutter button.
2. Keeping the shutter button half-pressed
(which maintains the focus setting), move
the camera to compose the image.
3. When you are ready to shoot the image,
press the shutter button the rest of the way
down.
NOTE
• Focus lock also locks exposure (AE).
• The focus frame does not appear on the display when the Touch Shutter is
enabled (On).
Procedure
Enter the REC Mode * MENU * Review
While Review is turned on, the camera will display an image immediately after it is
recorded.
• When “Type 1” is selected, the aperture, shutter speed, and ISO sensitivity, will be
red if the Auto Exposure is not correct.
Turning on Image Review (Review)
Type 1 Displays a full-screen view of the image for about one second.
Type 2
Displays a Review image in the upper left corner (in the case of a
portrait orientation image) or the lower left corner (in the case of a
landscape orientation image) of the monitor screen. Touching the
Review image will enter the PLAY mode and display a full-screen view
of the image.
Off Turns off review image display
Focus frame
Subject to be focused on

72 Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 35 for the procedure for viewing snapshots.
Use the procedure below to display the current make-up level (pages 41, 49).
1. Touch “ ” (PLAY) to enter the PLAY mode.
2. On the monitor screen, flick leftwards or rightwards
to scroll through images until the one whose make-
up level you want to check is displayed.
3. Flick upwards on the displayed image.
This displays its make-up level.
• The make-up level value is not displayed for a snapshot
or movie that is shot without using the Make-up function.
Viewing Snapshots
Displaying the Make-up Level

73 Viewing Snapshots and Movies
1. Touch “ ” (PLAY) to enter the PLAY mode.
2. Drag left or right across the screen image to
scroll through the movies until the one you
want is displayed.
• Touching “ ”, “ ” toggles between repeat
playback and one-time movie playback.
3. Touch “ ” (Movie) to start playback.
Viewing a Movie
Movie icon:
Movie recording time
Image quality
Playback in progress Playback paused
Touch “|”.
Touch “6”.
Progress bar

74 Viewing Snapshots and Movies
Movie Playback Controls
• Playback may not be possible for movies not recorded with this camera.
Pause/Play Touch “|” (pause) or “6” (play).
Fast forward/
Fast reverse
During playback, touch “ { }” (fast reverse) or “ ” (fast
forward).
• Each touch of either button increases the speed of the
fast forward or fast reverse operation.
• To return to normal playback speed, touch “ 6”.
Stop playback During playback, touch “.”.
Volume adjustment
During playback, touch “ n” and then drag the volume bar
to the desired level.
• Volume can be adjusted only while movie playback is in
progress.
1 frame forward/
back
While playback is paused, touch “ z y” or “ ”.
• Touching and holding this icon advances frames
continuously.
Information display
on/off Touch the screen.
Movie editing Pause movie play at the location where you want to cut,
and then touch “ ~” (page 75).

75 Viewing Snapshots and Movies
The Movie Editing feature lets you cut out a specific part of a movie.
1. Enter the PLAY mode and then start playback of the movie you want to
edit.
2. When playback reaches the location where you want to cut, touch “|”
to pause.
3. Touch “~”.
4. Touch the option that specifies what you want to cut.
5. Touch “Cut”.
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
Editing a Movie on the Camera (Movie Editing)
Previous Cut Cuts everything from the beginning of the movie up to
the current location.
Next Cut Cuts everything from the current location to the end of
the movie.
¡
¢

76 Viewing Snapshots and Movies
The image menu shows multiple images on a single screen.
1. In the PLAY mode, touch “]” or squeeze your
fingers on the screen.
This displays the image menu.
• Drag upwards or downwards to scroll to the next page of
images.
• To view the normal (single image) display mode, touch
the image your want to view.
• In the case of a movie, the first image in the movie is
displayed.
• A question mark (?) will be displayed for images that cannot be displayed for
some reason.
• You can also perform the operations below using the image menu. Touch the
icon of the function you want to use, touch an image, and then touch “OK”.
– Send an image to a smartphone
– Delete an image
– Protect an image
Snapshots can be zoomed on the monitor screen up to 8X.
• The actual available zoom factors depend on the size of the original image.
1. In the PLAY mode, drag left or right to display the image you want to
view.
2. To enlarge the image, spread your thumb and forefinger (page 18) on
the display or touch twice in the area you want to enlarge.
• Dragging an enlarged screen image will change the part of the image that is
displayed.
• Squeezing your thumb and forefinger (page 18) on the displayed image will
reduce it in size.
• To return an enlarged image to its actual size, tap it twice.
Viewing the Image Menu
Zooming an On-screen Image

77 Viewing Snapshots and Movies
With this function, you can select five snapshots, in the sequence you want them to
appear, and combine them into a 6-second, 10-second or 15-second movie that
includes effects and music.
1. In the PLAY mode, touch “ ” (Show Icons).
2. Touch “ ” (Promotion Movie).
3. Drag upwards or downwards to display the snapshot you want to use
in your Promotion Movie.
4. Touch the snapshot you want to use.
5. Repeat steps 3 and 4 to select a total of five snapshots, in the
sequence you want them to appear.
• Touch a selected snapshot will de-select it.
6. Touch “OK”.
7. Touch “Length”, “Transition”, and “Music”, and configure settings for
each item as required.
8. Touch “Create”.
This creates a Promotion Movie in accordance with the settings you configured.
Creating a Promotion Movie (Promotion Movie)
Length Select 15 seconds, 10-second or 6 seconds.
Transition
Enable or disable the transition effect. Selecting “On” (enabled)
applies a transition effect when changing from one image to the
next.
Music Select the background music you want to use. Selecting “Off”
creates a movie without music.

78 Viewing Snapshots and Movies
NOTE
• Movies cannot be converted to a promotion movie.
• You may experience conversion problems if you try to include snapshots recorded
with a camera other than this one.
• Promotion movies are HD movie quality, with an aspect ratio of 16:9. This means
that the upper and lower parts of a snapshot will be trimmed off when it is
converted to a promotion movie.
• Selecting a portrait orientation snapshot with the “Transition” setting enabled (On)
will trim the top and bottom of the image, with the bottom portion somewhat larger
than the top. When “Transition” is disabled (Off), black bands will appear on the
sides of the image.
• This function cannot be used for fewer than five images.

79 Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
The following are menu operations you can use to configure various camera settings.
. Example Menu Screen Operation
1. In the PLAY mode, touch “ ” (Show Icons).
2. Touch “MENU”.
This will display the menu screen.
• Menu contents are different in the REC mode and PLAY
mode.
3. Touch the item whose setting you want to change.
4. Configure the setting of the item in accordance with
the screen contents.
• To cancel and exit the menu, touch “MENU” or press the shutter button.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Using the PLAY Menu
Procedure
Enter the PLAY Mode * MENU * Protect

80 Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * MENU * Slideshow
You can use the slideshow mode to automatically scroll through all of the images in
camera memory.
NOTE
• All operations are disabled while the slideshow is transitioning from one image to
another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
• To return to normal (single image) display, touch the screen.
Playing a Slideshow on the Camera (Slideshow)

81 Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * MENU * Protect
You can protect images to prevent them from being deleted.
• A protected image will be indicated by “›”.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 121).
NOTE
• You can also protect images using the image menu (page 76).
Protecting a File Against Deletion (Protect)
All Files On Protects all files.
All Files Off Unprotects all files.
Select
Protects and unprotects specific files.
Drag upwards or downwards to display the image you want
to protect.
Touch an image to be protected, and
“›” will appears on the image.
You can repeat steps and as
many times as necessary to select
multiple images.
Touch “OK” or “ ”.
To unprotect an image, touch it in step
of the above procedure to remove
“›”.

82 Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * MENU * Rotation
1. Drag left or right to display the image you want to rotate.
2. Touch “ ”.
This will rotate the image 90 degrees to the left.
3. When the image is in the orientation you want, touch “ ”.
NOTE
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
Procedure
Enter the PLAY Mode * MENU * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can select resize an image to one of two
image sizes: 3M, VGA.
1. Drag left or right to display the image you want to resize.
2. Touch a size.
This resizes the image to the selected size and saves the result as a new
photograph.
NOTE
• The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
• This function cannot be used with a square image (page 45).
Rotating an Image (Rotation)
Resizing a Snapshot (Resize)

83 Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * Display snapshot * MENU * Trimming
You can crop a snapshot to trim parts you do not need, and save the result in a
separate file. The original snapshot is also retained.
1. Drag left or right to display the image you want to trim.
2. Select the aspect ratio of the saved image.
For a 4:3 aspect ratio image, you can select either of two trimmed image aspect
ratio: 4:3 or 1:1 (square).
• The aspect ratio selection screen will not appear if the aspect ratio of the
original image is 1:1 (square). Trimming such an image always results in a
square image. In this case, skip step 2 of this procedure and go directly to step
3.
3. Drag the image until the part you want to keep is displayed.
• To enlarge the image, touch the screen with your thumb and forefinger and
then spread them apart. To reduce the size of the image, touch the screen with
your thumb and forefinger and then squeeze them together.
4. Touch “OK”.
This will crop the image, leaving only the displayed part.
NOTE
• The recording date of the cropped image will be the same as the recording date of
the original snapshot.
Cropping a Snapshot (Trimming)

84 Connecting the Camera with a Smartphone
(Wireless Connection)
Connecting the Camera with a Smartphone
(Wireless Connection)
Your camera has both Bluetooth ® wireless technology and wireless LAN capabilities
built in. After establishing a wireless connection with a smartphone, you can perform
the operations described in the table below. Requires installation of the EXILIM
Connect app on your smartphone.
• Your camera can connect using
Bluetooth wireless technology with a
smartphone that supports Bluetooth low
energy technology.
Controlling Your Camera with a Smartphone
With this function: You can do this:
Auto Send
Images can be automatically sent as they are
shot to a smartphone that has been Bluetooth
wireless technology paired with the camera
(page
96)
.
One Time Share
Share selected snapshots for viewing on
smartphones that are not paired with the
camera (page 94).
The Scene app needs to be installed on the
smartphone in order to use One Time Share.
Add location info to snapshots
Configure settings to have a smartphone add
shooting location information (latitude,
longitude) to snapshots when they are sent
from the camera (page 102).

85 Connecting the Camera with a Smartphone
(Wireless Connection)
IMPORTANT!
• Inside an aircraft or anywhere else where use of wireless communication is
restricted or prohibited, put the camera into the airplane mode.
• Some smartphone models may not be able to play back movie files from your
camera.
• Depending on your smartphone model, its operating system version, and/or its
remaining storage capacity can cause failure of a movie or snapshot save
operation. Receiving a camera file, perform the required operation on your
smartphone to check if the file was stored properly.
• Location information is not added to snapshot data stored in camera memory.
• A movie received on an Android terminal:
– Depending on your movie player, you may not be able to playback movies and/
or audio.
• Images recorded on another manufacturer’s camera cannot be sent using this
function.
Shoot with phone
Remotely control and shoot with the camera
using a smartphone (page 92).
Send to phone
Send snapshots and movies recorded with your
camera to your smartphone.
After sending an
image to a smartphone, you can then upload it
from the smartphone to a social networking
service (page 98).
View on phone
View snapshots stored in camera memory on a
smartphone, and copy snapshots and movies
to a smartphone for viewing. You can also view
snapshots and movies in camera memory on a
computer, and copy them to a computer (page
99).
With this function: You can do this:

86 Connecting the Camera with a Smartphone
(Wireless Connection)
NOTE
• Note that using wireless functions requires more battery power usage than normal.
Make sure that the camera battery is sufficiently charged before starting a wireless
LAN operation.
• The operating range depends on the local communication environment and on the
type of smartphone you are connected to.
. About EXILIM Connect
For detailed information about EXILIM Connect, refer to the EXILIM Connect User’s
Guide (which you can download at the website below).
http://www.exilim.com/manual/
• Note that to view the EXILIM Connect User’s Guide, you will have to install Adobe
Reader. Consult CASIO authorized service center if you are unable to open to
display the PDF format User’s Guide.
• Note that EXILIM Connect User’s Guides may not be available in all languages. If
you cannot find a EXILIM Connect User’s Guide in your native language, please
use a version in another language.

87 Connecting the Camera with a Smartphone
(Wireless Connection)
Your camera has a variety of different wireless modes. Select
the wireless mode that suits your specific requirements.
1. Touch “ ” (Show Icons).
2. Touch the “ ” (Wireless) icon.
This displays a wireless mode screen.
3. Touch the wireless mode you want.
Using a Wireless Mode
Send to phone
Select to view images you shoot with the camera on a smartphone (pages 98,
99).
Pairing
Select this mode to establish a Bluetooth wireless technology connection
between the camera and a smartphone (page 90).
Shoot with phone
Select this mode for remote control of image recording from a smartphone
(page 92).
Wireless settings
Select this mode to configure wireless settings (page 100).
“ ” (Wireless)

88 Connecting the Camera with a Smartphone
(Wireless Connection)
. Wireless Connection Icons
After you configure camera and smartphone connection settings, the icons below will
appear on the camera screen to indicate the current communication status.
Semi-
transparent
Pairing is complete, but there is no Bluetooth wireless
technology connection.
Opaque Pairing is complete, and there is a Bluetooth wireless
technology connection.
Semi-
transparent Wireless LAN is enabled, but there is no connection.
Opaque Wireless LAN connected.
Opaque Wireless LAN connected, and image data is being sent.
Opaque Camera is in the Airplane Mode.
Opaque “Location info” is enabled.

89 Connecting the Camera with a Smartphone
(Wireless Connection)
Installing the EXILIM Connect Smartphone app on your smartphone makes it
possible to remotely control the camera from your smartphone and to send images
recorded with the camera to your smartphone. To install the EXILIM Connect app on
your smartphone, go to the EXILIM app site at the URL below.
http://www.casio.com.cn/dc/app/
. App operation guarantees
No guarantees are made concerning the ability to operate the EXILIM Connect app
on any particular smartphone or tablet.
IMPORTANT!
• For information about operating system versions supported by the app, see the
information provided at the EXILIM app site at the URL provided above.
• App functions and the required operating environment are subject to change
without notice.
. Android terminal
Install EXILIM Connect from the EXILIM app site at the URL provided above.
. iPhone (iOS)
Install EXILIM Connect from the EXILIM app site at the URL provided above.
Getting Ready to Establish a Connection between a
Smartphone and Your Camera
Installing the EXILIM Connect App on Your Smartphone

90 Connecting the Camera with a Smartphone
(Wireless Connection)
The first time you establish a wireless connection between the camera and a
smartphone, you need to use the procedure below to configure wireless connection
settings. This operation is required for the first connection only.
. Smartphone that supports Bluetooth low energy technology
Connecting the camera to a smartphone using Bluetooth wireless technology
(pairing) makes it simple to configure wireless connection settings.
IMPORTANT!
• Performing this operation automatically configures your smartphone’s wireless
LAN connection settings (page 91).
• Your camera can be paired with a single smartphone at one time.
• Some smartphone models may not be compatible with this camera.
• If you want to re-pair the camera with the smartphone it is already paired with, first
unpair them and then pair again. Re-pairing the camera and smartphone will result
in all pending unsent images to remain unsent.
Camera Operation
1. Touch the “ ” (Wireless) icon.
This will display the wireless mode screen.
2. Touch “Pairing”.
3. Touch “Start”.
Smartphone Operation
4. Start up the “EXILIM Connect” app.
5. Tap “Pairing”.
6. Perform the required connection operation as instructed by the app
and your smartphone.
This establishes a Bluetooth wireless technology connection between the camera
and smartphone.
• For information about how to configure wireless connection settings, refer to
the EXILIM Connect manual (page 86).
Camera Operation
7. Touch “Next”.
8. Use the Auto Send setting to enable or disable Auto Send.
Establishing a Wireless Connection for the First Time

91 Connecting the Camera with a Smartphone
(Wireless Connection)
9. To enable Auto Send, select either “All” or “Confirm first”.
NOTE
• After the camera is paired, Bluetooth wireless technology operation will consume
battery power even when the camera it turned off. Because of this, it is
recommended that you charge the camera’s battery before you plan to use it.
• Removing the camera’s battery will terminate the Bluetooth wireless technology
connection. However, the connection will be re-established when you load a
battery into the camera and turn on the power again.
. Smartphone that does not support Bluetooth low energy
technology
Configure smartphone wireless LAN connection settings (input the camera SSID and
password).
1. Touch the “ ” (Wireless) icon.
2. Touch “Shoot with phone”.
3. Touch “Start”.
This will enable connection with a smartphone and the
camera will display a screen for input of an SSID and
password.
4. For the smartphone Wi-Fi setting, input the
camera SSID and Password.
When the message “Start up the phone app.” appears on
the camera’s monitor screen, it means that the
smartphone has established a wireless connection with the camera.
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
. What to do if you are unable to establish a wireless LAN connection
between the camera and a smartphone.
This problem may be caused when the smartphone is already wirelessly connected to
one of the networks or devices below. Go to your smartphone’s Wi-Fi settings and
select this camera’s SSID.
– Household wireless LAN
– Public wireless LAN
– Portable wireless LAN device
SSID
Password

92 Connecting the Camera with a Smartphone
(Wireless Connection)
This function lets you remotely shoot a snapshot or movie with the camera using a
smartphone. You also can perform remote zoom, self-timer, and other operations as
well.
NOTE
• When using a smartphone to shoot with the camera, you can add location
information obtained by the smartphone to the image data. For information about
how to do this, refer to the EXILIM Connect User’s Guide (page 86).
. Bluetooth Wireless Technology Connection
1. Perform one of the operations below.
– Turn off the camera.
– Display the wireless mode screen.
Touch “ ” (Show Icons).
Touch the “ ” (Wireless) icon.
2. On the smartphone, start up the “EXILIM Connect” app.
3. On the smartphone, tap “Remote Capture”.
4. Compose the image on the smartphone’s screen as you shoot.
For information about how to use “Shoot with phone”, refer to the EXILIM Connect
manual (page 86).
• For snapshots, Premium Auto Pro is automatically selected as the recording mode
while shooting with Remote Capture.
Using a Smartphone as a Camera Remote Controller
(Shoot with phone)

93 Connecting the Camera with a Smartphone
(Wireless Connection)
. Cannot Connect with Bluetooth Wireless Technology
1. Touch the “ ” (Wireless) icon.
2. Touch “Shoot with phone”.
3. Touch “Start”.
• If there is a wireless LAN connection between the smartphone and camera,
advance to step 5 of this procedure.
4. For the smartphone’s Wi-Fi settings, select the SSID displayed on the
camera and establish a wireless LAN connection between the camera
and smartphone.
5. On the smartphone, start up the “EXILIM Connect” app.
6. Compose the image on the smartphone’s screen as you shoot.
For information about how to use “Shoot with phone”, refer to the EXILIM Connect
manual (page 86).
• For snapshots, Premium Auto Pro is automatically selected as the recording mode
while shooting with Remote Capture.

94 Connecting the Camera with a Smartphone
(Wireless Connection)
Share selected snapshots for viewing on smartphones that are not paired with the
camera. With One Time Share, you can send selected snapshots to a smartphone
that is Bluetooth paired, which then uploads them to a “Scene Server.” To upload
snapshots to the Scene sever, you need to have the Scene app installed on the
smartphone that is paired with the camera.
• Your smartphone must have Internet access to use this function. If your camera is
paired with an iPhone (iOS), you also need to use the iPhone to access the EXILIM
Connect settings screen and link with the Scene app before using this function. For
information about how to configure settings, refer to the EXILIM Connect User’s
Guide (page 86).
1. Touch the “ ” (Wireless) icon.
2. Touch “Send to phone”.
3. Touch “One Time Share”.
4. Touch a snapshot you want to share.
Selecting an image causes a check mark to appear in its check box.
5. After selecting all of the snapshots you want to
share, touch “OK”.
This will cause the images you selected to be sent to the
smartphone, which will then upload them to the Scene
Server.
• A QR code will appear on the camera monitor screen
when image send to the smartphone starts.
• If a send operation is taking a long time, the QR code
screen will change to a send in progress message. To
stop the send operation while this message is
displayed, touch “Complete”.
• An error message will appear on the camera’s monitor screen if a send
operation is not successful for some reason.
• A confirmation message will appear on the monitor screen if you try to turn off
the camera while the QR code screen is displayed. Do not turn off power until
the send operation is complete.
6. Using the smartphone with which the snapshots are to be shared, read
the QR code from the camera’s monitor screen.
• Your smartphone must have a QR code reader function in order to read the QR
code.
Sharing Snapshots with an Unpaired Smartphone
(One Time Share)

95 Connecting the Camera with a Smartphone
(Wireless Connection)
7. Use smartphone to access the URL produced by reading the QR code.
This will display the snapshots that were uploaded when the QR code was
created.
NOTE
• You can select up to 100 files, totaling no more than 500MB, for a single share
operation.
• When a large number of images are selected, it will take some time to send them to
the smartphone and/or upload them to the Scene server.
• To discontinue sharing of a set of images, use the Scene app to configure the
settings required to stop sharing.
• One Time Share cannot be used if there is insufficient free space on the memory
card.

96 Connecting the Camera with a Smartphone
(Wireless Connection)
Camera settings can be configured to send images automatically over a wireless
connection to a smartphone after they are recorded.
1. Touch the “ ” (Wireless) icon.
2. Touch “Send to phone”.
3. Touch “Auto Send”.
4. Touch the Auto Send function setting you want to use.
• Images that are sent will be marked by a “ ” (image sent) icon (page 10).
IMPORTANT!
• To use any Auto Send setting other than “Off”, you will need to pair the camera with
a smartphone (page 90).
Sending Images from the Camera to a Smartphone as They
are Recorded (Auto Send)
Setting Description
All Automatically sends images to the smartphone after they
are shot.
Confirm first
Sends image files selected by you to the smartphone.
• While this setting is selected, “ ” will be displayed on
the monitor screen along with the image you recorded.
Touching “ ” will cause the displayed image to be sent
to the smartphone.
Off Auto Send disabled.

97 Connecting the Camera with a Smartphone
(Wireless Connection)
NOTE
• Auto Send can be used only with a smartphone that supports Bluetooth low energy
technology. Both a Bluetooth and wireless LAN connection are required between
the camera and smartphone to auto send camera images.
• The icons below are displayed on the camera screen while the camera and
smartphone are connected.
– Wireless LAN connection: X
– Bluetooth wireless technology connection: V
• You can specify the size of the image sent to the smartphone using “Resize before
send” (page 101).
• You can use the smartphone apps below to view snapshots after sending them.
– iPhone: Camera Roll
– Android terminal: Gallery, Photo, or another photo browser app
• Auto Send is disabled while the camera’s Airplane Mode setting is “On” (page 100).
Auto Send become re-enabled when the camera’s Airplane Mode setting is
changed to “Off”.
• Even you change the Auto Sent setting to “Off” while “All” or “Confirm first” image
send operation is in progress, all of the images will be sent to the smartphone.
• When “All” is selected for Auto Send, a message will appear whenever you try to
delete a file or turn off the camera.
• If you try to turn off the camera while there are unsent images in memory, a
message will appear to alert you. If you want the images to be sent, leave the
camera on until the send operation is complete. Pressing [p] (Power) again will
turn off the camera.
• Note that if the connection between the camera and smartphone is lost while there
are unsent images in memory, the camera will turn off after about one minute. In
this case, the camera will try to send the images again after it is turned back on.

98 Connecting the Camera with a Smartphone
(Wireless Connection)
You can select one more snapshot and/or movie file in camera memory and send it to
a smartphone. You can select up to 100 files, totaling no more than 500MB for a
single send. After sending an image to a smartphone, you can then upload it to a
social networking service.
1. Touch the “ ” (Wireless) icon.
2. Touch “Send to phone”.
3. Touch “Send Selected Image”.
4. Touch the image you want to send to the smartphone.
Selecting the image of a file causes its check box to become selected.
• To exit the Send Selected Image operation, touch “Cancel”.
5. After selecting the images of all of the files you want to send to the
smartphone, touch “OK” or “ ”.
For information about how to use “Send Selected Image”, refer to the EXILIM
Connect manual (page 86).
Sending a Snapshot or Movie File from Camera Memory to a
Smartphone (Send Selected Image)

99 Connecting the Camera with a Smartphone
(Wireless Connection)
You can connect the camera to a smartphone over wireless LAN to view and
download snapshots and movies in camera memory on up to eight connected
smartphones. You can also view snapshots and movies in camera memory on a
computer, and copy them to a computer. A smartphone does not need to have the
EXILIM Connect app installed in order to access camera images using this function.
1. Touch the “ ” (Wireless) icon.
2. Touch “Send to phone”.
3. Touch “View on phone”.
This establishes a connection between the smartphone and camera, and displays
a URL.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 91).
• After about 60 seconds, the camera’s monitor screen will go blank. Touching
the monitor screen will cause its image to reappear.
4. On the smartphone, start up its browser app.
• Accessing the URL displayed by the camera will display
an image stored in camera memory.
• To exit the wireless LAN function, touch “Exit” on the
camera’s monitor screen.
IMPORTANT!
• Some smartphone models may not be able to play back movie files.
NOTE
• You can also view image in camera memory on a computer’s browser by
establishing a wireless LAN connection with the computer.
• For information about how to start up EXILIM Connect and view images, refer to
the EXILIM Connect manual (page 86). Note that the operation you need to
perform depends on whether or not there is a Bluetooth wireless technology
connection with the smartphone.
Viewing Snapshots and Movies in Camera Memory on a
Smartphone (View on phone)
URL

100 Connecting the Camera with a Smartphone
(Wireless Connection)
This section explains wireless mode operations and setting items.
1. Touch the “ ” (Wireless) icon.
This will display the wireless mode screen.
• Pressing the shutter button will return to the screen that was displayed before
the wireless mode screen.
2. Touch “Wireless settings”.
This will display the wireless setting screen.
3. Touch the item you want to configure.
4. Change the setting of the selected item.
• Changing a setting returns causes the wireless mode screen to reappear.
Procedure
“ ” (Wireless) * Wireless settings * Airplane Mode
Wireless connection with the camera is disabled while “On” is selected for the
airplane mode setting. Enter the airplane mode to disable generation of radio waves
from the camera while in a medical facility, on an aircraft, etc.
Configuring Wireless Connection Settings
Entering the Camera’s Airplane Mode (Airplane Mode)

101 Connecting the Camera with a Smartphone
(Wireless Connection)
Procedure
“ ” (Wireless) * Wireless settings * Auto Send
See page 96 for details.
Procedure
“ ” (Wireless) * Wireless settings * Auto Send File Settings
Specifies the files to be sent to a smartphone by Auto Send.
IMPORTANT!
• The maximum size movie file that can be sent by Auto Send is 100 MB.
Procedure
“ ” (Wireless) * Wireless settings Resize before send*
This feature can be use to resize snapshots before they are sent to a smartphone
using “Shoot with phone” or “Send to phone”.
Sending Images from the Camera to a Smartphone as They are
Recorded (Auto Send)
Specifying Images to be Sent by Auto Send
(Auto Send File Settings)
t ³ Snapshots and movies are sent.
t Snapshots and Instant Movies are sent.
t Only Only snapshots are sent.
Resizing Snapshots before Sending Them to a Smartphone
(Resize before send)
3M
Images are converted to 3M size before being sent.
• If an original image is 3M size or smaller, it is sent without
resizing.
Off Images are sent in the size they were originally recorded.

102 Connecting the Camera with a Smartphone
(Wireless Connection)
Procedure
“ ” (Wireless) * Wireless settings * Location info
You can enable the setting below to have the smartphone acquire and record location
information (latitude and longitude) when you shoot a snapshot with the camera.
Then when you send the snapshot to the smartphone, the location information will be
added to it. Note that location information is not added to movies.
IMPORTANT!
• Location information can be recorded only while there is a Bluetooth wireless
technology connection between the camera and smartphone.
• To select “On” for the camera’s “Location info” setting, pair the camera with a
smartphone (page 90).
• While “On” is selected for “Location info”, the smartphone acquires and records
location information each time you shoot a snapshot with the camera.
• Location information is not added to snapshot data stored in camera memory. It is
added when the snapshot is sent to the smartphone.
• To use this function, your smartphone’s location services must be enabled, and it
must be where location information can be received. Location information will not
be available to add to images if the smartphone is unable to receive location
information.
• You can check whether or not location information was added successfully on the
smartphone’s image receive screen.
• Up to 10,000 location records can be maintained by the smartphone. If there are
already 10,000 records, shooting a new snapshot will cause the oldest location
record to be deleted to make room for the new one.
• Enabling location-based services causes the location information, and other
personally identifiable information to be included in the snapshot data. Take care
when sharing or publishing such images on web services, etc.
• This camera is not designed to be used for navigation, surveying, or other activities
that require precision instruments.
Add Location Info to Snapshots (Location info)
Setting Description
On
Smartphone acquires and records location information when a
snapshot is shot, and adds it to the image data when the snapshot
is sent to the camera.
Off Location information is not acquired or added.

103 Connecting the Camera with a Smartphone
(Wireless Connection)
Procedure
“ ” (Wireless) * Wireless settings * WLAN password
Use procedure to change the password you used when establishing a wireless LAN
connection between the camera and a smartphone.
IMPORTANT!
• Before changing the wireless LAN password, unpair the camera from its paired
smartphone (page 104).
1. Touch the password digit you want to change.
2. Touch “ ” or “ ” to change the currently selected digit.
3. When the password is the way you want, touch “OK”.
NOTE
• Changing the wireless LAN password will terminate the connection with the
smartphone. To reconnect with the smartphone, configure wireless connection
settings (page 90). If your smartphone does not support Bluetooth low energy
technology, perform the operations below to change your smartphone’s Wi-Fi
settings.
– iPhone:
Tap the right arrow of the field where the SSID of the camera is displayed in the
Wi-Fi settings to delete network settings. After deleting, select the camera SSID
again and input the new password.
– Android terminal:
Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and
select Forget. Select the camera SSID again and input the new password.
Changing the Camera Password for Wireless LAN Connection
(WLAN password)

104 Connecting the Camera with a Smartphone
(Wireless Connection)
Procedure
“ ” (Wireless) * Wireless settings * Unpairing
Unpairs the camera from a smartphone.
To use the camera with a different smartphone, first unpair it from the current
smartphone.
NOTE
• When unpairing, be sure also to perform the unpairing operation on the
smartphone as well. For details, refer to the EXILIM Connect User’s Guide (page
86).
• Unpairing the camera from a smartphone will result in all pending unsent images to
remain unsent.
Unpairing the Camera from a Smartphone (Unpairing)

105 Printing
Printing
There are a variety of different ways to print images stored on a computer. This
section shows one standard printing example.
. Printing on a Windows Computer
1. Use the procedure under “Viewing and Storing Images on a Computer”
(page 107) to store the image you want to print, and then display the
image on your computer screen.
2. Click “Print” and then “Print”.
3. Configure the desired print settings and then click “Print”.
. Printing on a Macintosh
1. Use the procedure under “Connecting the Camera to Your Computer
and Saving Files” (page 110) to store the image you want to print, and
then display the image on your Macintosh screen.
2. Click “File” and then “Print”.
3. Configure print settings and then click “Print”.
This will print the selected image.
Professional Print Service
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer
You can use a printer equipped with a memory card slot
to print images directly from a memory card. For details,
see the user documentation that comes with your
printer.
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
Printing with a Computer

106 Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a
computer.
The procedures you need to perform are different for Windows and the Macintosh.
• The above recommended computer system environments do not guarantee proper
operation.
• The type of computer being used, certain settings, and other installed software
may interfere with proper operation.
Things you can do using a computer...
Save images to a
computer and
view them there
• Save images and view them manually
(USB connection) (pages 107, 110).
Play back and
edit movies
• You can play back movies (pages 109,
112).
• To edit movies, use commercially
available software as required.
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 106.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
110.
Using the Camera with a Windows Computer
When you want
to do this:
Operating
System
Version
Required Software:
Save images to a
computer and
view them there
manually
Windows 10,
Windows 8.1,
Windows 7,
Windows Vista
Installation not required.
Play movies
Windows 10,
Windows 8.1,
Windows 7
Windows Media Player 12
Windows Vista
Software that can play movie files with the file
name extension MOV.
You may need to download the software on
the Web.

107 Using the Camera with a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1. Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your computer.
• For details about connecting to
the camera and precautions
when connecting, see page 24.
2. Press [p] (Power) to turn on the camera.
When you turn on the camera, check to make sure that the color of its operation
lamp changes from red to green or amber (page 25). Note that in this case the
monitor screen will remain blank.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
3. Windows 10 users: Click “Start” and then “Explorer”. Next, in the
sidebar, click “PC”.
Windows 8.1 users: Click “Desktop” and then “Explorer”.
Windows 7, Windows Vista users: Click “Start” and then “Computer”.
Viewing and Storing Images on a Computer
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
USB
Micro USB cable
(included with camera)
[USB] port

108 Using the Camera with a Computer
4. Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
5. Right-click the “DCIM” folder.
6. On the shortcut menu that appears, click “Copy”.
7. Windows 10, Windows 8.1 users: Click “Documents”.
Windows 7, Windows Vista users: Click “Start” and then “Documents”.
• If you already have a “DCIM” folder in “Documents”, the next step will overwrite
it. If you want to keep the existing “DCIM” folder, you need to change its name
or move it to a different location before performing the next step.
8. Windows 10, Windows 8.1 users: On the “Documents” menus, click
“Home” and then “Paste”.
Windows 7, Windows Vista users: On the “Documents” menu, click
“Organize” or “Edit”, and then “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” folder. You now have a copy of the files that are in camera memory
on your computer.
• After copying images, it is recommended that you right-click the DCIM folder
and change its name to something else.
9. After you finish copying images, disconnect the camera from the
computer.
On the camera, press [p] (Power) to turn off the camera. After checking to make
sure that the operation lamp is unlit or lit red, disconnect the USB cable.

109 Using the Camera with a Computer
. To view images you copied to your computer
1. Double-click the copied “DCIM” folder to open it.
2. Double-click the folder that contains the images you want to view.
3. Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 114.
. Movie Playback Precautions
• To play back a movie, first save it to your computer and then double-click the movie
file. Proper movie playback may not be possible for data accessed over a network,
from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Quit any other applications you have running, and stop resident applications.

110 Using the Camera with a Computer
• The above recommended computer system environments do not guarantee proper
operation.
• Proper operation depends on the level of performance of the computer you are
using.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
• The camera does not support operation with Mac OS X 10.0 to 10.4. Operation is
supported with Mac OS 10.5 or higher (using the OS standard USB driver) only.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
Using the Camera with a Macintosh
When you want to do
this:
Operating System
Version
Required Software:
Save images to your
Macintosh and view
them there manually
OS X Installation not required.
Save images to your
Macintosh
automatically/Manage
images
OS X
Photos or iPhoto, which comes
bundled with some Macintosh
products.
Play movies OS X 10.5 or
higher
QuickTime Player
(installed on computer)
Connecting the Camera to Your Computer and Saving Files
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.

111 Using the Camera with a Computer
. To connect the camera to your computer and save files
1. Turn off the camera and then
use the micro USB cable that
comes with the camera to
connect it to your Macintosh.
• For details about connecting to
the camera and precautions
when connecting, see page 24.
2. Press [p] (Power) to turn on the camera.
• When you turn on the camera, check to make sure that the color of its
operation lamp changes from red to green or amber (page 25). In this mode,
your Macintosh recognizes the memory card loaded in the camera (or the
camera’s built-in memory if it does not have a memory card loaded) as a drive.
The appearance of the drive icon depends on the Mac OS version you are
using.
• The first time you connect the camera to your Macintosh with the USB cable,
an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.
3. Double-click the camera’s drive icon.
The camera’s operation lamp will light green at this time. In this mode, your
Macintosh recognizes the memory card loaded in the camera (or the camera’s
built-in memory if it does not have a memory card loaded) as a drive. The
appearance of the drive icon depends on the Mac OS version you are using.
4. Drag the “DCIM” folder to the folder to which you want to copy it.
5. After the copy operation is complete, drag the drive icon to Trash.
6. Disconnect the camera from the computer.
On the camera, press [p] (Power) to turn off the camera. After checking to make
sure that the operation lamp is unlit or lit red, disconnect the USB cable.
USB
Micro USB cable
(included with camera)
[USB] port

112 Using the Camera with a Computer
. To view copied images
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder to open it.
3. Double-click the folder that contains the images you want to view.
4. Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 114.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
. Movie Playback Precautions
• To play back a movie, first save it to your computer and then double-click the movie
file. Proper movie playback may not be possible for data accessed over a network,
from a memory card, etc.
• Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Shut down other applications that are running.

113 Using the Camera with a Computer
The camera creates a file each time you shoot a snapshot, record a movie, or
perform any other operation that stores data. Files are grouped by storing them in
folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder
Structure” (page 114).
• You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see page 10.
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
Files and Folders
Name and Maximum Number Allowed Example
File
Each folder can contain up to 9999 files named
CIMG0001 through CIMG9999. The extension
on the file name depends on the file type.
26th file name:
Folders
Folders are named from 100CASIO to
999CASIO.
There can be up to 900 folders in memory.
First folder name:
CIMG 0026. JPG
Extension
Serial number (4 digits)
100CAS I O
Serial number (3 digits)

114 Using the Camera with a Computer
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
. Memory Folder Structure
Memory
DCIM Folder
Recording Folder
Image File
Movie File
Recording Folder
Recording Folder
Created after execution of Auto Send or other function with EXILIM Connect.
• In addition to the above, there is also an “EXILIM” folder for storage of shooting
information.
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 114 in order for the camera to be able to recognize them correctly.
Memory Card Data
DCIM
100CASIO
CIMG0001.JPG
CIMG0002.MOV
101CASIO
102CASIO
EX_CNCT

115 Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Procedure
MENU * Setup * Screen
You can use the following procedure to change the brightness of the monitor screen.
Procedure
MENU * Setup * Info
Selecting “On” displays setup status and other information.
NOTE
• When “Info” is enabled (On) in the PLAY mode, the exposure, shutter speed, and
ISO sensitivity setting values of the currently displayed image are displayed in red
when the current image’s Auto Exposure (AE) is not correct.
• In the case of images shot with the Makeup Function, you can display the current
make-up level (page 72), regardless of this setting.
For information about menu operations, see page 62.
Adjusting Monitor Screen Brightness (Screen)
Auto With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
+2 Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.
0 Normal monitor screen brightness for indoor use, etc.
–1 Screen brightness for viewing in a dark environment without disturbing
others around you.
Selecting Display Information (Info)

116 Other Settings (Set Up)
Procedure
MENU * Setup * Screen Lock
Normally, the arrangement of icons and the images displayed on the camera monitor
screen change automatically in accordance with the camera’s orientation. Selecting
“On” for the “Screen Lock” setting will lock the screen so its contents do not readjust
to match the camera orientation.
Procedure
MENU * Setup * Shutter Sounds
You can select from among three shutter sounds.
Procedure
MENU * Setup * Sounds
• Setting a volume level of 0 mutes output.
Locking the Screen (Screen Lock)
Specify the Shutter Sound
Configuring Camera Sound Settings (Sounds)
Startup
Toggles the operation tone between on and off.
Half Shutter
Shutter
Operation
Volume
Operation Vol Specifies the sound volume.
Playback Vol Specifies the volume of movie audio output.
Posing Vol
Specifies the volume of Posing Shot voice guidance.
Voice guidance is output in accordance with this
setting even if “Off” is selected for the “Shutter”
operation tone setting.

117 Other Settings (Set Up)
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
Example: July 10, 2017, 1:25 p.m.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using some printing application.
• Stamping is performed in accordance with the date and time settings (page 119)
and the display style settings (page 119).
Time Stamping Snapshots (Timestamp)
Date 2017/7/10
Date & Time 2017/7/10 1:25pm
Off No stamping of date and/or time

118 Other Settings (Set Up)
Procedure
MENU * Setup * World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1. Touch “Destination”.
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2. Touch “City”.
• To specify summer time for the destination city, select “DST” and then select
the “On” setting (Summer time is used in some geographical areas to advance
the current time setting by one hour during the summer months).
3. Drag upwards and downwards to display the area of the destination
city and then touch the area.
4. Drag upwards and downwards until you find the city you want, and
then touch to select it.
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 119).
Use this procedure to specify the time displayed by the camera for your home city
and destination.
1. Touch “Time”.
2. Touch “Home” or “Destination”.
This will configure the time setting of the location you touched in the previous
step.
Configuring World Time Settings (World Time)
Setting a Travel Destination
Selecting the Time Display

119 Other Settings (Set Up)
Procedure
MENU * Setup * Adjust
1. Touch the value you want to change (year, month,
day, hour, minute).
2. Touch “ ” or “ ” to change the currently
selected value.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 118) before
setting the time and date. If you set the time and date
while the wrong city is selected for your Home City, the
times and dates of all of the World Time cities (page
118) will be wrong.
• To switch between 12-hour and 24-hour format, touch
the 12/24 hour switch icon.
• Touching and holding “ ” or “ ” scrolls at high speed.
3. Touch “OK”.
Procedure
MENU * Setup * Date Style
You can select from among three different styles for the date.
Example: July 10, 2017
Setting the Camera’s Clock (Adjust)
Specifying the Date Style (Date Style)
YY/MM/DD 17/7/10
DD/MM/YY 10/7/17
MM/DD/YY 7/10/17
12/24 hour
switch icon

120 Other Settings (Set Up)
Procedure
MENU * Setup * Language
. Specify the display language you want.
1. On the menu screen, touch “Setup”.
2. Touch “Language”.
3. Drag upwards and downwards until you find the
language you want, and then touch to select it.
• Camera models sold in certain geographic areas may not
support display language selection.
Specifying the Display Language (Language)

121 Other Settings (Set Up)
Procedure
MENU * Setup * Startup
Selecting “On” for Startup causes a built-in startup screen to appear on the monitor
screen whenever the camera is turned on.
Procedure
MENU * Setup * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory or a memory card will delete all protected images
stored there.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Displaying a Startup Screen at Power On (Startup)
Formatting Built-in Memory or a Memory Card (Format)

122 Other Settings (Set Up)
Procedure
MENU * Setup * Reset
See page 146 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language, WLAN password
NOTE
• Resetting the camera does not unpair it from a smartphone (page 90).
• Resetting the camera causes the Airplane Mode setting (page 100) to become
“Off”.
Procedure
MENU * Setup * Version
Selecting this menu item displays the camera model name, the version of firmware
installed on the camera, the camera’s MAC address, and the camera’s serial number.
• Note that the MAC address is fixed number that functions as the camera’s network
device identifier.
• Check this screen after updating the camera’s firmware to confirm that updating
was actually performed.
Resetting the Camera to Factory Defaults (Reset)
Checking the Current Camera Firmware Version (Version)

123 Appendix
Appendix
*DANGER
This symbol indicates information that, if ignored or applied incorrectly, creates the
danger of death or serious personal injury.
*WARNING
This indication stipulates matters that have the risk of causing death or serious injury
if the product is operated incorrectly while ignoring this indication.
*CAUTION
This indication stipulates matters that have the risk of causing injury as well as
matters for which there is the likelihood of damage only if the occurrence of physical
product is operated incorrectly while ignoring this indication.
Symbol Examples
Safety Precautions
!This circle with a line through it (-) means that the indicated action must not
be performed. Indications within or nearby this symbol are specifically
prohibited. (The example at left indicates that disassembly is prohibited.)
$
The black dot (0) means that the indicated action must be performed.
Indications within this symbol are actions that are specifically instructed to be
performed. (The example at left indicates that the power plug must be
unplugged from the electrical socket.)
*DANGER
. Rechargeable Battery
• To charge the battery, use only the method specifically described in this
manual. Attempting to charge the battery by an unauthorized means
creates the risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing
so can damage the battery, and cause deterioration of its performance
and loss of service life.
• The battery is intended for use with a CASIO Digital Camera only. Use
with any other device creates the risk of the battery damage, or
deterioration of battery performance and service life.
+
%
+

125 Appendix
*
WARNING
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor,
or while it is overheating creates the risk of fire and electric shock.
Immediately perform the following steps whenever any of the above
symptoms are present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and
creates the risk of fire and personal injury.
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an
automobile or other vehicle, or while walking. Looking at the monitor
while in motion creates the risk of serious accident.
. LED Light
• Never use the LED light while it is pointed in the direction of a person
operating a motor vehicle. Doing so can interfere with the driver’s vision
and create the risk of accident.
. USB-AC Adapter
• Misuse of USB-AC adapter creates the risk of fire and electric shock. Be sure to
observe the following precautions.
– Use only the specified USB-AC adapter.
– Never use the USB-AC adapter with another device.
– Use a power outlet that matches the power supply specified for the
USB-AC adapter.
– Never plug the USB-AC adapter or power cord into a wall outlet that is shared
by other devices, or into a shared extension cord.
– Never locate the USB-AC adapter near a stove or other heating device.
• Misuse of the USB-AC adapter can cause them to become damaged, creating
the risk of fire and electric shock. Be sure to observe the following precautions.
– Never place heavy objects on the USB-AC adapter or subject it to
direct heat.
– Do not modify the USB-AC adapter, allow it to become damaged, or
forcibly bend it.
– Do not twist or pull on the power cord.
– When in use, locate the cord where it will not be tripped over.
$
-
-
-
-
-

126 Appendix
• Never touch the power plug while your hands are wet. Doing so creates
the risk of electric shock.
• Should the power cord or power plug become damage, contact your
retailer or nearest CASIO authorized service center.
• Do not use the USB-AC adapter in areas where liquids * might spill on
them. Liquids create the risk of fire and electric shock.
*Liquids: Water, sports drinks, seawater, animal or pet urine, etc.
• Do not place a flower vase or any other liquid container on top of the
USB-AC adapter. Water creates the risk of fire and electric shock.
• Do not touch the camera or USB-AC adapter during lightning storms.
If a power cord was included with your camera
• The power cord that comes with the camera is designed for use in the
country where the camera was purchased. If you use the camera in
another country, be sure to use a power cord that conforms to that
country’s ratings and power supply voltage. Use of an improper power cord
creates the risk of fire and electric shock.
• Before going out, be sure to unplug the USB-AC adapter from the power
outlet and put in a place away from objects used by animals and pets.
An animal or pet chewing on the power cord can cause it short, leading
to the risk of fire.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside
the camera creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present. Particular care is required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a bathroom.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Disassembly and Modification
• Never try to take it apart or modify it in any way. Doing so creates the
risk of electric shock, burn injury, and other personal injury. Be sure to
leave all internal inspection, maintenance, and repair up to your retailer
or nearest CASIO authorized service center.
*
WARNING
"
+
-
%
1
+
+
%
!

127 Appendix
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other
rough treatment creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the power outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Memory Cards
• Memory cards are small and present a risk of accidentally being
swallowed by infants and young children. Keep memory cards out of the
reach of infants and young children. If a memory card is ever swallowed
accidentally, contact a physician immediately.
. Precaution when Camera is On
• Do not touch the camera for long periods while it is on. The camera
becomes warm when on, and long term contact creates the risk of low-
temperature burns.
. Interference with other digital devices
• Should you notice radio interference or other problems on other devices
is being caused while using this camera, stop using the wireless
functions (Remote Capture, image transfer, wireless image viewing,
etc.) of this camera, or turn off the camera. Use of wireless functions creates the
risk of radio interference and abnormal operation of other devices.
• When in a medical facility or aircraft, comply with instructions of
personnel in charge. Electromagnetic waves and other signals emitted
by the camera’s wireless function create the risk of accident.
• Do not use the camera’s wireless function while in the vicinity of high
precision digital devices or digital devices that use weak signals. Doing
so can interfere with proper operation of such digital devices and create
the risk of accident.
• When using the camera’s wireless function, keep it away from any
person wearing a pacemaker. Magnetism emitted by the camera may
affect cardiac pacemakers and other medical devices. Should you ever
notice any abnormality, immediately move away from the product and contact a
physician.
• On a crowded train or any other crowded location where there is the
possibility of being in the vicinity of a person wearing a cardiac
pacemaker, stop using the wireless functions (Remote Capture, image
transfer, wireless image viewing, etc.) of this camera, or turn off the camera.
Radio waves emitted by the camera’s wireless function may affect pacemaker
operation.
*
WARNING
-
+
+
-
+
-
+
+

128 Appendix
*
CAUTION
. USB-AC Adapter
• Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make
sure you observe the following precautions.
– Never cover the USB-AC adapter or power cord with a quilt, blanket,
or other cover while it is in use, and do not use it near a heater. Doing
so can interfere with heat radiation and cause the area around them
to become hot.
– Do not use detergent when cleaning the power cord, the USB-AC adapter, or
the USB cable (especially the plugs and jacks).
– Insert the power plug into the wall outlet as far as it will go.
– Unplug the power plug from the wall outlet before leaving the camera
unattended for long periods, such as when leaving on a trip, etc.
– At least once a year, use a cloth or vacuum cleaner to clean any dust build up
on the prongs of the power plug and in the area around them.
– (Power cord included with your camera) When unplugging from the wall outlet,
never pull on the power cord. Grasp the power plug and pull.
. Rechargeable Battery
• If battery charging does not end normally within the specified charging
time, stop charging anyway and contact your local CASIO authorized
service center. Continued charging creates the risk of battery
overheating, fire, and explosion.
• Be sure to read the user documentation that comes with the camera
before using or charging the battery.
• Store batteries in a location that cannot be reached by infants and young
children. When using a battery where infants and young children are
present, be on guard to ensure that they do not have the chance to
remove the battery from the camera.
• Do not leave batteries near areas used by pets. A pet chewing on a
battery can lead to accidents caused by the battery leaking, overheating,
or exploding.
• Should fluid from a battery accidentally get onto clothing or your skin,
immediately rinse it off with clean tap water. Prolonged contact with
battery fluid can cause skin irritation.
. Connections
• Never plug any devices that are not specified for use with this camera
into connectors. Connecting a non-specified device creates the risk of
fire and electric shock.
. Unstable Locations
• Never place the camera on an unstable surface, on a high shelf, etc.
Doing so can cause the camera to fall, creating the risk of personal
injury.
-
+
+
+
+
-
+
-
-

129 Appendix
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so
creates the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight,
in a closed vehicle parked in the sun, or other areas subject to very high
temperatures
. Monitor Screen
• Do not apply strong pressure to the LCD panel surface or subject it to
strong impact. Doing so can cause the display panel glass to crack and
lead to personal injury.
• Should the monitor screen ever become cracked, never touch any of the
liquid inside the monitor screen. Doing so creates the risk of skin
inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse
your mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin,
immediately rinse with clean water for at least 15 minutes and contact
your physician.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by
transferring it to a computer or other storage device. Note that data can
be deleted in the case of camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure
as described in the documentation that comes with the camera.
Incorrectly replacing the battery can result in corruption or loss of data in
camera memory.
. LED Light
• Do not fire the LED light or use other light emitting functions while the
light is pointed in the direction of and too close to a person’s face. Doing
so creates the risk of momentary loss of eyesight.
*
CAUTION
-
-
1
+
+
+
+
-
Produkt Specifikationer
Mærke: | Casio |
Kategori: | Digital kamera |
Model: | Exilim EX-TR700 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Casio Exilim EX-TR700 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Digital kamera Casio Manualer
8 Juli 2024
7 Juli 2024
7 Juli 2024
6 Juli 2024
6 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
Digital kamera Manualer
- BML
- Kyocera
- Dnt
- Quintezz
- Gembird
- Motorola
- Red
- GoClever
- Geonaute
- Lamax
- Renkforce
- RadioShack
- A-Rival
- Medion
- General Electric
Nyeste Digital kamera Manualer
29 Marts 2025
29 Marts 2025
11 Marts 2025
11 Marts 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025