Casio G-Shock DW-5600GRLZM-3ER Manual

Casio Ur G-Shock DW-5600GRLZM-3ER

Læs gratis den danske manual til Casio G-Shock DW-5600GRLZM-3ER (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Casio G-Shock DW-5600GRLZM-3ER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operation Guide 3229/3421

MA1301-EA

E-1

About This Manual

•Depending on the model of your watch, display text

appears either as dark figures on a light background

or light figures on a dark background. All sample

displays in this manual are shown using dark figures

on a light background.

•Button operations are indicated using the letters

shown in the illustration.

E-3

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date ......................................................................................... E-6

To switch the backlight function on and off ......................................................... E-9

To set the alarm time ............................................................................................ E-11

To stop the alarm .................................................................................................. E-13

To switch an alarm and Hourly Time Signal on and off .................................... E-13

To set the countdown time .................................................................................. E-14

To use the countdown timer ................................................................................ E-15

To switch auto repeat timing on and off ............................................................. E-16

To measure elapsed time ..................................................................................... E-17

To record split times............................................................................................. E-18

To time first and second place finishes .............................................................. E-18

E-4

General Guide

•Press to change from mode to mode.C

Timekeeping Mode Alarm Mode

Press .C

E-5

•After you perform an operation in any mode, pressing C returns to the Timekeeping

Mode.

•Press in any mode to illuminate the display. Illumination turns off about twoD

seconds after you release .D

Countdown Timer Mode Stopwatch Mode

E-6

Timekeeping

To set the time and date

1. Press while in the Timekeeping Mode. TheA

seconds digits flash on the display because they

are

selected

2. Press to change the selection in the followingC

sequence.

Seconds

Day

Hour Minutes

YearMonth

Day of week

Month

Day

Hour

PM indicator

Minutes

Seconds

E-7

3. While the seconds digits are selected (flashing), press to reset the seconds toB

“00”. If you press B while the seconds count is in the range of 30 to 59, the seconds

are reset to “00” and 1 is added to the minutes. If the seconds count is in the range

of 00 to 29, the minutes count is unchanged.

4. While any other digits (besides seconds) are selected (flashing), press to increaseB

the number. Holding down changes the number at high speed.B

•To switch between the 12-hour and 24-hour formats, press DDDDD while some

digits are flashing.

5. After you set the time and date, press to return to the Timekeeping Mode.A

•The day of the week is automatically set in accordance with the date.

•The date can be set within the range of January 1, 2000 to December 31, 2099.

•If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

E-8

About the backlight

When you switch the backlight function on, the backlight of the watch flashes

whenever alarm (page E-10), countdown timer or hourly time signal is sounding.

•Pressing at any time illuminates the display, regardless of the backlight’s on/offD

setting.

•The backlight of this watch employs an electro-luminescent (EL) light, which loses

its illuminating power after very long term use.

•Frequent use of the backlight shortens the battery life.

•The watch will emit an audible sound whenever the display is illuminated. This is

caused by a transistor that vibrates when the EL panel lights up. It does not indicate

malfunction of the watch.

•The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

•The backlight automatically stops illuminating whenever an alarm sounds.

E-9

To switch the backlight function on and off

In the Timekeeping Mode, hold down for about two seconds to switch the backlightB

function on and off. When you switch the backlight function on, an indicator appears

on the display as shown.

Backlight function

on indicator

•The backlight function on indicator remains on the display in all modes until you

switch the backlight function off.

•The above operation controls operation of the backlight function only. It does not

affect operation of audible tones and signals.

E-2

Contents

General Guide ......................................................................................................... E-4

Timekeeping ............................................................................................................ E-6

Alarm ...................................................................................................................... E-10

Countdown Timer ................................................................................................. E-14

Stopwatch .............................................................................................................. E-17

Specifications ....................................................................................................... E-19

Operation Guide 3229/3421

E-10

Mode indicator

Alarm on indicator

DayMonth

Minutes

Hour

Hourly time signal

on indicator

Alarm

You can set an alarm with hour, minutes, month, and

day. When the alarm is on, the alarm sounds for

20 seconds at the preset time. When the Hourly Time

Signal is on, the watch beeps every hour on the hour.

Alarm Types

The types of alarm you get depends on the information

you set.

•To set a daily alarm

Set the hour and minutes for the alarm time. Set “ ”–

for the month and “ ” for the day (see step 3 under– –

“To set the alarm time”). This type of setting causes

the alarm to sound every day at the time you set.

•To set a date alarm

Set the month, day, hour and minutes for the alarm

time. This type of setting causes the alarm to sound

at the specific time, on the specific date you set.

E-11

•To set a 1-month alarm

Set the month, hour and minutes for the alarm time. Set “ ” for the day (see step– –

3 under “To set the alarm time”). This type of setting causes the alarm to sound

every day at the time you set, only during the month you set.

•To set a monthly alarm

Set the day, hour and minutes for the alarm time. Set “ ” for the month (see step 3–

under “To set the alarm time”). This type of setting causes the alarm to sound every

month at the time you set, on the day you set.

To set the alarm time

1. Press while in the Alarm Mode until the hour digits start to flash on the display.A

The hour digits flash because they are

selected

•At this time, the alarm is automatically switched on.

2. Press to change the selection in the following sequence.C

Hour

Day

Minutes

Month

E-12

3. Press to increase the selected digits. Holding down changes the number atB B

high speed.

•The format (12-hour and 24-hour) of the alarm time matches the format you select

for normal timekeeping.

•When setting the alarm time using the 12-hour format, take care to set the time

correctly as morning or afternoon.

4. After you set the alarm time, press to return to the Alarm Mode.A

•If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Alarm Mode automatically.

E-13

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To switch an alarm and Hourly Time Signal on and off

Press while in the Alarm Mode to change the status of an alarm (see “AlarmB

Types” on page E-10) and Hourly Time Signal in the following sequence.

Both off Both onAlarm only Hourly Time Signal only

Hourly time signal on indicator

Alarm on indicator

E-14

Mode indicator

Minutes

SecondsHours

Current time

Countdown Timer

The countdown timer can be set within a range of 1

second to 24 hours. When the countdown reaches

zero, an alarm sounds for 10 seconds or until you press

any button.

To set the countdown time

1. Press while in the Countdown Timer Mode. TheA

hours digit flashes on the display because it is

selected

2. Press to change the selection in the followingC

sequence.

SecondsMinutesHours

E-15

3. Press to increase the selected number. Holding down changes the numberB B

at high speed.

•To set the starting value of the countdown time to 24 hours, set .0:00' 00

4. After you set the countdown time, press A to return to the Countdown Timer Mode.

•If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Countdown Timer Mode automatically.

To use the countdown timer

1. Press while in the Countdown Timer Mode to start the countdown timer.B

2. Press again to stop the countdown timer.B

•You can continue countdown timer operation by pressing .B

3. Stop the timer and then press until the countdown time is reset to its startingA

value.

•When the end of the countdown is reached and auto repeat timing is off, the alarm

sounds for 10 seconds or until you stop the alarm by pressing any button. Countdown

timing stops, and the countdown time is automatically reset to its starting value

after the alarm stops.

E-16

Auto repeat on indicator

1. Press while in the Countdown Timer Mode. TheA

hours digit flashes on the display because it is

selected

2. Press to switch auto repeat on and off.D

3. Press to return to the Countdown Timer Mode.A

•When the end of the countdown is reached while

auto repeat is on, the alarm sounds, but the

starting countdown time is reset and countdown

timing starts again automatically whenever the

countdown reaches zero. You can stop timing by

pressing , and manually reset to the startingB

countdown time by pressing .A

To switch auto repeat timing on and off

E-17

Current time

Mode indicator

Minutes

Seconds

1/100 second

The Stopwatch Mode lets you measure elapsed time,

spl it tim es, an d t wo fin ish es. The r ang e o f the

stopwatch is 23 hours, 59 minutes, 59 seconds.

To measure elapsed time

1. Press to start the stopwatch.B

2. Press to stop the stopwatch.B

•You can resume the measurement operation by

pressing again.B

3. Press to clear the stopwatch to all zeros.A

•For the first 60 minutes, the display shows minutes,

seconds, and 1/100 second. After 60 minutes, the

display format changes to show hours, minutes, and

seconds.

Stopwatch

E-18

To record split times

1. Press to start the stopwatch.B

2. Press A to display the timing up to that point. Stopwatch timing continues internally.

3. Press to clear the split time and to continue time measurement on the display.A

•You can repeat steps 2 and 3 as many times as you want.

4. Press to stop the time measurement.B

5. Press to clear the stopwatch to all zeros.A

To time first and second place finishes

1. Press to start the stopwatch.B

2. Press when the first finisher crosses the line, and record the time.A

3. Press when the second finisher crosses the line.B

4. Press to display the finishing time of the second finisher.A

5. Press again to clear the stopwatch to all zeros.A

E-19

Specifications

Accuracy at normal temperature: 15 seconds a month±

Timekeeping: Hour, minutes, seconds, pm (PM), month, day, the day of the week

Time system: Switchable between 12-hour and 24-hour formats

Calendar system: Auto-calendar pre-programmed from the year 2000 to 2099

Alarm: Multi-function alarm, hourly time signal

Countdown Timer

Measuring unit: 1 second

Input range: from 1 second to 24 hours

Other: Auto-repeat function

Stopwatch

Measuring units: 1/100 second (for the first 60 minutes)

1 second (after 60 minutes)

Measuring capacity: 23 hours, 59 minutes, 59 seconds

Measuring modes: Elapsed time, split time and two finishes

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	G-Shock DW-5600GRLZM-3ER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio G-Shock DW-5600GRLZM-3ER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025