Casio G-Shock DW-D5500BB-1ER Manual

Casio Ur G-Shock DW-D5500BB-1ER

Læs gratis den danske manual til Casio G-Shock DW-D5500BB-1ER (5 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Casio G-Shock DW-D5500BB-1ER, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/5
Operation Guide 3433
E-9
x When DST is turned on, the UTC offset setting range is –11.0 to +15.0, in
0.5-hour units.
x For information about Flash Alert, see “Flash Alert” (page E-34).
4. Press to exit the setting screen.A
x The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
E-8
3. When the setting you want to change is fl ashing, use and to change it as D B
described below.
Screen To do this: Do this:
Reset the seconds to Press .D
Toggle between Daylight Saving Time
( ) and Standard Time ( )
Press .D
Specify the UTC offset Use (+) and (–).D B
Change the hour or minutes Use (+) and (–).D B
Change the year
Change the month or day
x See “Daylight Saving Time (DST)” on page E-9 for details about DST setting.
x For details about the UTC offset, see the “City Code Table” at the back of this
manual.
x The UTC offset setting range is –12.0 to +14.0, in 0.5-hour units.
E-7
To set the time and date
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. Press to move the fl ashing in the sequence shown C
below to select other settings.
Seconds DST UTC Offset
YearDayFlash Alert
C C
C C
C
Hour
Minutes
C
C
C
Month
C
UTC Offset
E-6
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select the UTC offset before you set the time and date.
Month – Day
PM indicator
Hour : Minutes Seconds
Day of week
E-5
C C
C
Stopwatch Mode Countdown Timer
Mode
Alarm Mode
E-4
General Guide
x Press to change from mode to mode.C
x In any mode (except when a setting screen is on the display), press to illuminate B
the display.
C
Timekeeping Mode World Time Mode
C
E-3
To test the alarm .................................................................................................... E-27
To turn an alarm on and off .................................................................................. E-28
To turn the Hourly Time Signal on and off .......................................................... E-29
To illuminate the display ....................................................................................... E-31
To specify the illumination duration .................................................................... E-31
To turn the auto light switch on and off .............................................................. E-33
To turn Flash Alert on and off .............................................................................. E-35
To turn the button operation tone on and off ..................................................... E-36
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-7
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-10
To toggle between 12-hour and 24-hour timekeeping ....................................... E-11
To view the time for another city code ................................................................ E-12
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-13
To measure times with the stopwatch ................................................................. E-15
To use Auto-Start .................................................................................................. E-16
To confi gure the countdown timer ......................................................................E-20
To use the countdown timer ................................................................................. E-22
To set an alarm time .............................................................................................. E-25
E-1
Contents
General Guide ..........................................................................................................E-4
Timekeeping ............................................................................................................. E-6
World Time .............................................................................................................E-12
Stopwatch .............................................................................................................. E-14
Countdown Timer ..................................................................................................E-17
Alarms ....................................................................................................................E-23
Illumination ............................................................................................................E-30
Reference ............................................................................................................... E-34
Specifi cations ........................................................................................................E-42
E
About This Manual
x Depending on the model of your watch, display text
appears either as dark fi gures on a light background or
light fi gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MA1401-EA © 2014 CASIO COMPUTER CO., LTD.
Operation Guide 3433
E-19
Countdown End Beeper
The countdown end beeper lets you know when the countdown reaches zero.
x When the progress beeper is turned off, the countdown end beeper sounds for
about 10 seconds, or until you press any button to stop it.
x When the progress beeper is turned on, the countdown end beeper sounds for
about one second.
Progress Beeper
When the progress beeper is turned on, the watch uses beeps to signal countdown
progress as described below.
x Starting from fi ve minutes before the end of the countdown, the watch emits four
short beeps at the top of each countdown minute.
x 30 seconds before the end of the countdown, the watch emits four short beeps.
x The watch emits a short beep for each of the last 10 seconds of the countdown.
x If the countdown start time is six minutes or greater, the watch emits a short beep
for each second of the fi nal 10 seconds before the fi ve-minute point is reached. Four
short beeps are emitted to signal when the fi ve-minute point is reached.
E-18
Auto-repeat
When auto-repeat is turned on, the countdown restarts automatically from the
countdown start time when it reaches zero.
When auto-repeat is turned off, the countdown stops when it reaches zero and the
display shows the original countdown start time.
x Pressing while an auto-repeat countdown is in progress pauses the current D
countdown. You can resume the auto-repeat countdown by pressing , or you can D
press to reset to the countdown time starting value. A
Countdown Timer Beeper Operations
The watch beeps at various times during a countdown so you can keep informed
about the countdown status without looking at the display. The following describes the
types of beeper operations the watch performs during a countdown.
E-17
Countdown Timer
The countdown timer can be set within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero. The countdown timer also has an auto-
repeat feature and a progress beeper that signals the
progress of the countdown.
x All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-5).
Confi guring the Countdown Timer
The following are the settings you should confi gure before
actually using the countdown timer.
Countdown start time; Auto-repeat on/off; Progress beeper
on/off
x See “To confi gure the countdown timer” (page E-20) for
information about setting up the timer.
Hours
Minutes
Seconds
E-16
About Auto-Start
With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation
starts automatically when the countdown reaches zero.
During the fi nal three seconds of the countdown, a beeper sounds with each second.
To use Auto-Start
1. While the stopwatch screen is showing all zeros in the
Stopwatch Mode, press .A
x This displays a 5-second countdown screen.
x To return to the all zeros screen, press again.A
2. Press to start the countdown.D
x When the countdown reaches zero, a tone sounds and a
stopwatch timing operation starts automatically.
x Pressing while the Auto-Start countdown is in D
progress starts the stopwatch immediately.
E-15
To measure times with the stopwatch
Elapsed time
DDDDA
Start Stop Resume Stop Clear
Split time
DAADA
Start Split
( displayed)SPL
Split release Stop Clear
Two Finishes
DADAA
Start Split
First runner
fi nishes.
Display time of
fi rst runner.
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
Clear
E-14
Stopwatch
The stopwatch lets you measure elapsed time, split times,
and two fi nishes. It also includes Auto-Start.
x The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
x The stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
x The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
x Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to elapsed
time measurement.
x All of the operations in this section are performed in
the Stopwatch Mode, which you enter by pressing C
(page E-5).
1/100 second
Hours
Minutes
Seconds
E-13
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use to display the city code D
whose Standard Time/Daylight Saving Time setting you
want to change.
2. Hold down for about one second to toggle Daylight A
Saving Time ( displayed) and Standard Time ( DST DST
not displayed).
x The indicator is on the display whenever you display DST
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
DST indicator
E-12
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-4).
To view the time for another city code
In the World Time Mode, press to scroll eastwardly D
through city codes.
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time for a city is wrong, check your
Timekeeping Mode time and the UTC offset settings and
make necessary changes.
City code
Current time and date in
selected city
E-11
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press to toggle between 12-hour timekeeping and D
24-hour timekeeping.
x With the 12-hour format, the (PM) indicator appears to the left of the hour digits for P
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
E-10
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down until the A
seconds start to fl ash, which indicates the setting
screen.
2. Press to display the DST setting screen.C
3. Press to toggle between Daylight Saving Time D
( displayed) and Standard Time ( displayed).
4. Press to exit the setting screen.A
x The indicator appears on the display to indicate that DST
Daylight Saving Time is turned on.
DST indicator

Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: G-Shock DW-D5500BB-1ER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio G-Shock DW-D5500BB-1ER stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur Casio Manualer

Casio

Casio G-Shock GST-S110 Manual

27 Juli 2025
Casio

Casio Baby-G BGD-570 Manual

27 Juli 2025
Casio

Casio Edifice EFS-S510 Manual

27 Juli 2025
Casio

Casio Vintage A100WE-1AVT Manual

27 Juli 2025
Casio

Casio G-Shock GM-S5640 Manual

27 Juli 2025
Casio

Casio Baby-G MSG-S200 Manual

27 Juli 2025
Casio

Casio G-Shock GA-B001 Manual

27 Juli 2025
Casio

Casio Vintage A100 Manual

27 Juli 2025
Casio

Casio G-Shock GWG-2000 Manual

27 Juli 2025
Casio

Casio Vintage CA-500WEG Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Citizen

Citizen Star Wars Darth Vader Tsuno AN3669-52E Manual

27 Juli 2025
Citizen

Citizen Eco-Drive Brycen AW1598-70X Manual

27 Juli 2025
Citizen

Citizen Star Wars Jedi Master BM7498-00W Manual

27 Juli 2025
Citizen

Citizen Ladies' Dress EM0850-80D Manual

27 Juli 2025
Citizen

Citizen Disney Princess Ariel GA1073-63W Manual

27 Juli 2025
Citizen

Citizen Star Wars R2-D2 Tsuno AN3666-51A Manual

27 Juli 2025
Citizen

Citizen Silhouette Chronograph FB1443-08A Manual

27 Juli 2025
Citizen

Citizen Promaster Diver Super Titanium BN0200-56E Manual

27 Juli 2025
Citizen

Citizen Disney Special Edition Mulan GA1057-01W Manual

27 Juli 2025
Citizen

Citizen Eco-Drive Brycen BL556358E Manual

26 Juli 2025