Casio G-Shock G-9300 Manual

Casio Ur G-Shock G-9300

Læs gratis den danske manual til Casio G-Shock G-9300 (11 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Casio G-Shock G-9300, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
Operation Guide 3261 3281
MO1405-EB
E-2
Warning !
• The measurement functions built into this watch are not intended for taking
measurements that require professional or industrial precision. Values
produced by this watch should be considered as reasonable representations
only.
• The Moon phase indicator that appears on the display of this watch is not
intended for navigation purposes. Always use proper instruments and
resources to obtain data for navigation purposes.
• When engaging in mountain climbing or other activities in which losing your
way can create a dangerous or life-threatening situation, always use a second
compass to confirm direction readings.
• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of
this product or its malfunction.
E-3
About This Manual
• Depending on the model of your watch, display text appears either as dark figures
on a light background (Module 3261), or light figures on a dark background
(Module 3281). All of the illustrations in this manual show Module 3261.
• Button operations are indicated using the letters shown in the illustration.
• Note that the product illustrations in this manual are intended for reference only,
and so the actual product may appear somewhat different than depicted by an
illustration.
Module 3261 Module 3281
E-4
Things to check before using the watch
1. Check the battery power level.
Is “H” or “M” displayed for the battery power indicator
(page E-14)?
Go to step 2.
Power is low. Charge the watch by placing it in a
location where it is exposed to light. For details,
see “Charging the Watch” (page E-12).
NO YES
YES
Does any one of the following conditions exist?
• Battery power indicator shows “
L
” and “
LOW
” is
displayed in the upper right corner of the screen.
• “
CHG
” is displayed in the upper right corner of the screen.
• The face is blank.
The watch is charged
sufficiently.
For details about
charging, see
“Charging the Watch”
(page E-12).
NEXT
Battery power
indicator
E-5
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To configure Home City settings” (page E-26) to configure
your Home City and daylight saving time settings.
Important!
World Time Mode data depend on correct Home City, time, and date settings in the
Timekeeping Mode. Make sure you configure these settings correctly.
3. Set the current time.
See “Configuring Current Time and Date Settings” (page E-29).
The watch is now ready for use.
E-6
Contents
E-3 About This Manual
E-4 Things to check before using the watch
E-12 Charging the Watch
E-19 To recover from the sleep state
E-20 To turn Power Saving on and off
E-21 Mode Reference Guide
E-25 Timekeeping
E-26 Configuring Home City Settings
E-26 To configure Home City settings
E-28 To change the Daylight Saving Time (summer time) setting
E-7
E-29 Configuring Current Time and Date Settings
E-29 To change the current time and date settings
E-33 Digital Compass
E-34 To take a digital compass reading
E-40 To perform magnetic declination correction
E-42 To perform bidirectional calibration
E-43 To perform northerly calibration
E-46 To store a direction angle reading in Bearing Memory
E-48 To set a map and find your current location
E-50 To find the bearing to an objective
E-52 To determine the direction angle to an objective on a map and head in
that direction
E-8
E-57 Thermometer
E-57 To enter and exit the Digital Compass/Thermometer Mode
E-59 To calibrate the temperature sensor
E-61 Specifying Temperature Unit
E-61 To specify temperature unit
E-63 Temperature Reading Precautions
E-64 Using the Moon Data
E-64 To enter the Moon Data Mode
E-67 To reverse the displayed Moon phase
E-71 Checking the Current Time in a Different Time Zone
E-71 To enter the World Time Mode
E-72 To view the time in another time zone
E-72 To specify standard time or daylight saving time (DST) for a city
E-9
E-74 Using the Stopwatch
E-74 To enter the Stopwatch Mode
E-74 To perform an elapsed time operation
E-75 To pause at a split time
E-75 To measure two finishes
E-77 Using the Countdown Timer
E-77 To enter the Countdown Timer Mode
E-78 To specify the countdown start time
E-79 To perform a countdown timer operation
E-79 To stop the alarm
Operation Guide 3261 3281
E-10
E-80 Using the Alarm
E-80 To enter the Alarm Mode
E-81 To set an alarm time
E-82 To test the alarm
E-82 To turn an alarm and the Hourly Time Signal on and off
E-83 To stop the alarm
E-84 Illumination
E-84 To turn on illumination manually
E-85 To change the illumination duration
E-88 To turn the auto light switch on and off
E-91 Graphic Area
E-92 Button Operation Tone
E-93 To turn the button operation tone on and off
E-11
E-94 Troubleshooting
E-99 Specifications
E-12
Charging the Watch
The face of the watch is a solar cell that generates power from light. The generated
power charges a built-in rechargeable battery, which powers watch operations. The
watch charges whenever it is exposed to light.
Charging Guide
Whenever you are not
wearing the watch, leave it in
a location where it is exposed
to light.
• Best charging performance
is achieved by exposing the
watch to the strongest light
available.
When wearing the watch,
make sure that its face is not
blocked from light by the
sleeve of your clothing.
• The watch may enter a
sleep state (page E-18) if its
face is blocked by your
sleeve even only partially.
E-13
Warning!
Leaving the watch in bright light for charging can cause it to become quite hot.
Take care when handling the watch to avoid burn injury. The watch can become
particularly hot when exposed to the following conditions for long periods.
• On the dashboard of a car parked in direct sunlight
• Too close to an incandescent lamp
• Under direct sunlight
Important!
• Allowing the watch to become very hot can cause its liquid crystal display to black
out. The appearance of the LCD should become normal again when the watch
returns to a lower temperature.
• Turn on the watch’s Power Saving function (page E-18) and keep it in an area
normally exposed to bright light when storing it for long periods. This helps to
ensure that power does not run down.
• Storing the watch for long periods in an area where there is no light or wearing it in
such a way that it is blocked from exposure to light can cause power to run down.
Expose the watch to bright light whenever possible.
E-14
Power Levels
You can get an idea of the watch’s power level by observing the battery power
indicator on the display.
Level
Battery Power
Indicator
Function Status
1
(H)
All functions enabled.
2
(M)
All functions enabled.
3
(L)
l
l
l
l
l
l
l
l
l
l
l
Illumination, beeper, and sensor
operation disabled.
4
(C)
l
l
l
l
l
l
l
l
l
l
l
l
Except for the
CHG
(charge)
indicator, all functions and display
indicators disabled.
5 All functions disabled.
Battery power
indicator
Battery power
indicator
E-15
• The flashing
LOW
indicator at Level 3 (
L
) tells you that battery power is very low,
and that exposure to bright light for charging is required as soon as possible.
• At Level 4 or Level 5, all functions are disabled and settings return to their initial
factory defaults. Once the battery reaches Level 2 (
M
) after falling to Level 4 or
Level 5, reconfigure the current time, date, and other settings.
• If charging starts from Level 5,
CHG
will start flashing on the display when Level 4
is reached. Note, however, that watch functions are not restored at this time. Leave
the watch exposed to sufficiently strong light until the battery level reaches Level 2
or Level 1 before using it.
• Leaving the watch exposed to direct sunlight or some other very strong light source
can cause the battery power indicator to show a reading temporarily that is higher
than the actual battery level. The correct battery level should be indicated after a
few minutes.
• All data stored in memory is deleted, and the current time and all other settings
return to their initial factory defaults whenever battery power drops to Level 4 or
Level 5, and when you have the battery replaced.
E-16
Power Recovery Mode
• Performing multiple sensor, illumination, or beeper operations during a short period
may cause all of the battery power indicators (
H
,
M
, and
L
) to start flashing on the
display. This indicates that the watch is in the power recovery mode. Illumination,
alarm, countdown timer alarm, hourly time signal, and sensor operations will be
disabled until battery power recovers.
• Battery power will recover in about 15 minutes. At this time, the battery power
indicators (
H
,
M
,
L
) will stop flashing. This indicates that the functions listed above
are enabled again.
• If all of the battery power indicators (
H
,
M
,
L
) are flashing and the
CHG
(charge)
indicator also is flashing, it means the battery level is very low. Expose the watch to
bright light as soon as possible.
• Even if battery power is at Level 1 (
H
) or Level 2 (
M
), the Digital Compass/
Thermometer Mode sensor may be disabled if there is not enough voltage available
to power it sufficiently. This is indicated when all of the battery power indicators (
H
,
M
,
L
) are flashing.
• Frequent flashing of all of the battery power indicators (
H
,
M
,
L
) probably means
that remaining battery power is low. Leave the watch in bright light to allow it to
charge.
E-17
Charging Times
Exposure Level
(Brightness)
Daily
Operation
*1
Level Change *2
Level 5 Level 4 Level 3 Level 2 Level 1
Outdoor sunlight
(50,000 lux)
5 min. 2 hours 16 hours 5 hours
Sunlight through a window
(10,000 lux)
24 min. 6 hours 79 hours 21 hours
Daylight through a window
on a cloudy day (5,000 lux)
48 min. 12 hours
159 hours
43 hours
Indoor fluorescent lighting
(500 lux)
8 hours 168 hours – – – – – –
*1 Approximate amount of exposure time required each day to generate enough
power for normal daily operation.
*2 Approximate amount of exposure time (in hours) required to take power from one
level to the next.
E-18
• The above exposure times all are for reference only. Actual exposure times depend
on lighting conditions.
• For details about the operating time and daily operating conditions, see the “Power
Supply” section of the Specifications (page E-101).
Power Saving
When turned on, Power Saving enters a sleep state automatically whenever the watch
is left for a certain period in an area where it is dark. The table below shows how
watch functions are affected by Power Saving.
• There actually are two sleep state levels: “display sleep” and “function sleep”.
Elapsed Time in Dark Display Operation
60 to 70 minutes
(display sleep)
Blank, with
PS
flashing
Display is off, but all functions are
enabled.
6 or 7 days
(function sleep)
Blank, with
PS
not flashing
All functions are disabled, but
timekeeping is maintained.
E-19
• The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch is
already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep
state.
• The watch will not enter a sleep state while it is in the Stopwatch Mode or
Countdown Timer Mode.
To recover from the sleep state
Move the watch to a well-lit area, press any button, or angle the watch towards your
face for reading (page E-86).

Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: G-Shock G-9300

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio G-Shock G-9300 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur Casio Manualer

Casio

Casio AE2000W-1AV Manual

5 September 2025
Casio

Casio AEQ-110 Manual

4 September 2025
Casio

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025
Casio

Casio Baby-G BSA-B100 Manual

27 Juli 2025
Casio

Casio G-Shock GM-110 Manual

27 Juli 2025
Casio

Casio G-Shock GM-S5600 Manual

27 Juli 2025
Casio

Casio Edifice EF-527D-1A Manual

27 Juli 2025
Casio

Casio Edifice EFR-571 Manual

27 Juli 2025
Casio

Casio G-Shock GST-S110 Manual

27 Juli 2025
Casio

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko

Grand Seiko 9F85 Manual

12 September 2025
Grand Seiko

Grand Seiko 9R01 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R65 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R02 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R15 Manual

11 September 2025
Citizen

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025
Citizen

Citizen L Mae EM1060-52N Manual

3 September 2025
Citizen

Citizen Corso Diamond EW2712-55E Manual

3 September 2025
Citizen

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025
Breitling

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025