Casio GD-100-1ADR Manual

Casio Ur GD-100-1ADR

Læs gratis den danske manual til Casio GD-100-1ADR (4 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Casio GD-100-1ADR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Operation Guide 3263

MA1007-EA

About This Manual

Depending on the model of your watch, display text appears •

either as dark ﬁgures on a light background or light ﬁgures

on a dark background. All sample displays in this manual are

shown using dark ﬁgures on a light background.

Button operations are indicated using the letters shown •

in the illustration.

Each section of this manual provides you with the •

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Indicators

Graphic area A

Graphic area B

PM indicator

Auto light switch on indicator

DST indicator

Flash Alert on indicator

Hourly time signal on indicator

Alarm on indicator Mute indicator

General Guide

Press •C to change from mode to mode.

•In any mode (except when a setting screen is on the display), press to illuminate B

the display.

Timekeeping Mode World Time Mode Alarm Mode Stopwatch Mode

Press .C

Countdown Timer

Mode

Timekeeping

The Timekeeping Mode’s Multi Time feature gives you

quick and easy access to the current time and date in

four different cities, numbered from T-1 (Time 1) through

T-4 (Time 4). T-1 is your Home City Time, and T-2,

T-3, and T-4 are Local Times. Local Times are kept in

synchronization with your Home City Time (T-1).

PM indicator

Day of week

Hour : Minutes Seconds

Month – Day

Switching Between Time Screens

Each press of cycles the time screens in the sequence shown below. D

Displayed for one second

DD D

While the Home City Time (T-1) screen is displayed, pressing •A will switch the day

of the week / month-day indication to the currently selected Home City code and the

T-1 indicator for about one second.

You can change the current time setting for your Home City Time (T-1) only. •

For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting. •

Scrolling through the Time Screens

In the Timekeeping Mode, holding down •D for about three seconds will cycle the

time screens in sequence, from T-1 through T-4.

Pressing any button will display the Home City Time (T-1) screen. •

Changing the Current Home City Time and Date Settings

Use 1. to display the current Home City Time (T-1) D

screen.

Hold down 2. until the seconds start to ﬂash, which A

indicates the setting screen.

Press 3. to move the ﬂashing in the sequence shown C

below to select other settings.

(OUR&ORMAT&LASH!LERT

3ECONDS #ITY#ODE (OUR

9EAR

-INUTES

)LLUMINATION$URATION3ETTING

$34

$AY -ONTH

When the setting you want to change is ﬂashing, use 4. and to change it as D B

described below.

Screen To do this: Do this:

Reset the seconds to .

Press .D

Toggle between Daylight Saving Time ( )

and Standard Time ( ).

Change the city code. Use (east) and (west).D B

Change the hour or minutes. Use (+) and (–).D B

Toggle between 12-hour ( ) and 24-hour

( ) timekeeping. Press .D

Change the year. Use (+) and (–).D B

Change the month or day.

Toggle the setting between 1.5 seconds ( )

and 3 seconds ( ).

Press .D

Toggle between Flash Alert on ( ) and

off ( ).

See “Daylight Saving Time (DST)” for details about DST setting. •

For information about Flash Alert, see “Flash Alert”. •

Press 5. to exit the setting screen.A

The day of the week is displayed automatically in accordance with the date (year, •

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

Operation Guide 3263

To toggle the Timekeeping Mode time between DST and Standard Time

Use 1. to display the current Home City Time (T-1) D

screen.

Hold down 2. until the seconds start to ﬂash, which A

indicates the setting screen.

Press 3. to display the DST setting screen.C

Press 4. to toggle between Daylight Saving Time D

( displayed) and Standard Time ( displayed).

Press 5. to exit the setting screen.A

The •DST indicator appears on the Timekeeping screen to

indicate that Daylight Saving Time is turned on.

DST indicator

12/24-Hour Format

With the 12-hour format, the •P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without •

any indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is •

applied in all other modes.

Changing the City Setting of a Local Time

You can select any one of the city codes in the table at the back of this manual as a

Local Time city.

Display the Local Time whose city setting you want to change, and then hold down 1.

A for about one second until the current city code starts fo ﬂash.

Use 2. (east) and (west) to select the city code you want.D B

Press 3. to display the DST setting screen.C

Press 4. to toggle between Daylight Saving Time (D displayed) and Standard

Time ( displayed).

After the settings are the way you want, press 5. .A

Swapping the Home City Time with a Local Time

You can use the procedure below to swap the current Home City Time (T-1) with one

of the Local Times (T-2, T-3, T-4).

In the Timekeeping Mode, use 1. to display the Local Time that you want to swap D

with the Home City Time.

Press 2. and at the same time.A B

World Time

World Time shows the current time in 48 cities (31 time

zones) around the world.

All of the operations in this section are performed in the •

World Time Mode, which you enter by pressing .C

To view the time for another city code

In the World Time Mode, press to scroll eastwardly D

through city codes.

For full information about city codes, see the “City Code •

Table”.

If the current time for a city is wrong, check your •

Timekeeping Mode time and time zone settings and

make the necessary changes.

City code

Current time and date in

the zone of the selected

city code

To toggle a city code time between Standard Time and Daylight Saving Time

In the World Time Mode, use 1. (east) to display the city D

code (time zone) whose Standard Time/Daylight Saving

Time setting you want to change.

Hold down 2. for about one second to toggle Daylight A

Saving Time ( displayed) and Standard Time ( DST DST

not displayed).

The •DST indicator is on the display whenever you display

a city code for which Daylight Saving Time is turned on.

Note that the DST/Standard Time setting affects only •

the currently displayed city code. Other city codes are

not affected.

Note that you cannot switch between Standard Time •

and Daylight Saving Time while UTC is selected as the

city code.

To change your Home Time city to the current World Time city

In the World Time Mode, use 1. to display the city you want to make your new D

Home Time city.

Press 2. and at the same time.A B

This makes the World Time city you selected in step 1 your new Home Time city. •

Alarms

Your watch has a total of ﬁve alarms, each of which you

can conﬁgure as a daily alarm or one-time alarm.

Daily Alarm: Sounds at the preset time each day. •

One-time Alarm: Sounds once at the preset time and then •

is disabled automatically.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

All of the operations in this section are performed in the •

Alarm Mode, which you enter by pressing .C

Alarms operate in coordination with the current Home •

City Time.

DST indicator

Alarm on indicator

Alarm number

Alarm time

(Hour : Minutes)

To set an alarm time

In the Alarm Mode, use 1. to scroll through the alarm D

screens until the alarm number you want to set is

displayed.

After you select an alarm, hold down 2. until the hour setting of the alarm time A

starts to ﬂash, which indicates the setting screen.

This operation turns on the One-time Alarm automatically. •

Press 3. to move the ﬂashing in the sequence shown below to select other C

settings.

Hour Minutes

One-time Alarm/Daily Alarm Selection

While a setting is ﬂashing, use 4. and to change it as described below.D B

Screen To do this: Do this:

Change the hour and

minutes. Use (+) and (–).D B

With the 12-hour format, set the time correctly •

as a.m. or p.m. ( indicator).P

/Toggle between One-

time Alarm and Daily

Alarm.

Press .D

One-time Alarm on:

Daily Alarm on:

Press 5. to exit the setting screen.A

Alarm Operation

The alarm tone sounds at the preset time for 20 seconds, regardless of the mode the

watch is in.

Alarm and Hourly Time Signal operations are performed in accordance with the •

Home City Time (T-1).

To stop the alarm tone after it starts to sound, press any button. •

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

To turn an alarm on and off

In the Alarm Mode, use 1. to select an alarm.D

Press 2. to cycle through the alarm settings as shown below.A

Alarm Off One-Time Alarm

Daily Alarm On

In all modes, the alarm on indicator is shown for the alarm that is currently turned •

on.

The alarm on indicator ﬂashes while the alarm is sounding. •

To turn the Hourly Time Signal on and off

In the Alarm Mode, use 1. to select the Hourly Time D

Signal.

Press 2. to toggle it on and off.A

The Hourly Time Signal on indicator is shown on the •

display in all modes while this function is turned on.

Hourly time signal on

indicator

Countdown Timer

The countdown timer can be set within a range of one

second to 24 hours. An alarm sounds when the countdown

reaches zero.

All of the operations in this section are performed in the •

Countdown Timer Mode, which you enter by pressing .C

Minutes

Hours

Seconds

1/10 second

To conﬁgure the countdown timer

While the countdown start time is on the display in the 1.

Countdown Timer Mode, hold down until the current A

countdown start time starts to ﬂash, which indicates the

setting screen.

If the countdown start time is not displayed, use the •

procedure under “To use the countdown timer” to

display it.

Press 2. to move the ﬂashing in the sequence shown C

below to select other settings.

Hours Minutes Seconds

When the setting you want to change is ﬂashing, use 3. (+) and (–) to change D B

the ﬂashing item.

To specify a countdown start time of 24 hours, set •.

Press 4. to exit the setting screen.A

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	GD-100-1ADR
Pakkevægt:	72 g
Pakkedybde:	51.2 mm
Pakkebredde:	55 mm
Pakkehøjde:	17.4 mm
Armbånd, materiale:	Resin
Vandfast:	Ja
Kalender:	Ja
Stopur:	Ja
Timer:	24t
Urtype:	Armbåndsur
Batterilevetid:	7 År
Batteritype:	CR2025
Slagfast:	Ja
Alarmfunktion:	Ja
Produktdesign:	Sport
Mekanismetype:	Elektronisk
Se opkaldstype:	LED-skive
Vandbestandig dybde:	200 m
Husets farve:	Sort
Båndets hovedfarve:	Sort
Etui form:	Rund
Hovedfarve på urskive:	Grå
Køn:	Hanstik
Nøjagtighed:	15 sek/md
Se markørstil:	Arabisk nummervisning
Verdenstid funktkon:	Ja