CDA ECN92 Manual

CDA Emhætte ECN92

Læs gratis den danske manual til CDA ECN92 (20 sider) i kategorien Emhætte. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7 anmeldelser. Har du et spørgsmål om CDA ECN92, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : F : E : 01949 862 012 01949 862 003 customer.care@cda.eu www.cda.euW :

ECP/ECN Extractors

Manual for Installation, Use and Maintenance

Important

The CDA Group Ltd cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note

that CDA reserve the right to invalidate the guarantee supplied with

this product following incorrect installation or misuse of the appliance

or use in a commercial environment.

This appliance is not designed to be used by people (including

children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had

supervision or instructions on how to use the appliance by someone

who is responsible for their safety.

Under no circumstances should any external covers be removed for

servicing or maintenance except by suitably qualiﬁed personnel.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity:

This appliance has been manufactured to the strictest standards and

complies with all applicable legislation, including Gas safety, Electrical

safety (LVD) and Electromagnetic interference compatibility (EMC).

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special

local authority waste collection centre or to a dealer providing

appliance recycling services.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health. It also

enables the constituent materials to be recovered, saving both energy

and resources. As a reminder of the need to dispose of household

appliances separately, the product is marked with a crossed-out

wheeled dustbin.

Please note:

• Under no circumstances should the extractor be connected to any

gas ventilation system, ﬂue system or hot air ducting system.

• Do not vent the extractor into an attic or loft space.

• Only house the extractor in rooms with adequate ventilation.

Remember that the extractor is powerful and whatever air is

extracted needs to be replaced.

• Do not tile the extractor in. It should be removable for service or

maintenance.

• Do not use silicone sealant to secure the hood to the wall.

• You must be able to isolate the extractor from the mains electrical

supply after installation.

• This extractor has been designed to be used in a room with a

volume of less than 36m.

• Steam cleaners must not be used when cleaning this appliance.

• The performance of your extractor will vary depending on a number

of factors. These include: type of extraction, length of ducting, room

volume, ventilation available and cleanliness of the ﬁlters.

Using your Extractor

For best performance, you should switch on the extractor 15 minutes

before starting to cook and leave it to run for approximately 15 minutes

after the end of cooking.

Control Panel

A - Power o button

B - Speed level buttons

C - Light button

To switch the extractor light on or o

• Press button “C”.

To switch on the extractor or to change the speed at any time when

the extractor is running

• Press the relevant “B” button for the ﬁrst, second or third speed level

as required.

To switch the extractor o

• Press the “A” button.

Fig. 1 A B C

Care and Maintenance

IMPORTANT : DO NOT PERFORM

MAINTENANCE OR CLEANING OF

THE EXTRACTOR WITHOUT FIRST

SWITCHING OFF THE ELECTRICITY

SUPPLY.

Cleaning

You should use a nonabrasive cleaner.

Any abrasive cleaner (including Cif) will

scratch the surface and could erase the

control panel markings.

You can clean your extractor eectively

by simply using a dilute solution of

water and mild detergent and drying to

a shine with a clean cloth, for example

the CDA E-Cloth.

Cleaning the grease ﬁlter

The grease ﬁlter should be kept clean

to minimise the risk of ﬁre.

At least once a month you should

remove and clean the grease ﬁlter with

hot soapy water. You can also wash the

grease ﬁlter in a dishwasher, ensuring

that you place it in an upright position to

Fig. 2

Produkt Specifikationer

Mærke:	CDA
Kategori:	Emhætte
Model:	ECN92
Bredde:	900 mm
Dybde:	500 mm
Højde:	- mm
Produktfarve:	Rustfrit stål
Kontroltype:	Knapper
Antal hastigheder:	3
Indbygget skærm:	Ingen
Årligt energiforbrug:	- kWh
Tilsluttet belastning:	140 W
Lampetype:	Halogen
Støjniveau:	60 dB
Energieffektivitetsklasse:	D
Pæreeffekt:	20 W
Antal lyskilder:	2 pære(r )
Maksimal ekstraktionseffekt:	391 m³/t
Fedtfilter type:	Aluminium
Ekstraktionstype:	Aftræk/Recirkulerende
Højde (min.):	640 mm
Højde (maks.):	1020 mm