Chief NAPDH11L Manual

Chief Ikke kategoriseret NAPDH11L

Læs gratis den danske manual til Chief NAPDH11L (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Chief NAPDH11L, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

I N S T R U C C I O N E S D E I N S T A L A C I Ó N

NAPDH11L

NAPDH11

Surge Arresters

Descargadores de sobretensión

NAPDH11/NAPDH11L

I N S TA L L AT I O N I N S T R U C T I O N S

NAPDH11/NAPDH11L Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION

alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING

FAILURE TO READ AND

FOLLOW THE FOLLOWING INSTRUCTIONS CAN RESULT

IN SERIOUS PERSONAL INJURY, DAMAGE TO EQUIPMENT

OR VOIDING OF FACTORY WARRANTY. It is the installer’s

responsibility to make sure all components are properly

assembled and installed using the instructions provided.

READ ALL INSTRUCTIONS BEFORE USING THIS

PRODUCT!!!!

DANGER: TO REDUCE THE RISK OF

ELECTRIC SHOCK:

1. Use only in dry locations indoors.

2. Do not plug into another relocatable power tap.

3. This device features an internal protection that will

disconnect the surge protective component at the end of its

useful life but will maintain power to the load - now

unprotected. If this situation is undesirable for the

application, follow the manufacturer’s instructions for

replacing the device.

4. Do not install this device if there is not at least 10 meters

(30 ft) or more of wire between the electrical outlet and the

electrical service panel.

5. The input plug of this power tap is intended to serve as the

disconnect device, it shall be easily accessible and

withdrawn.

6. This surge arrester does not contain internal Circuit Breaker

protection; INSTALLER MUST ensure that the input of this

surge arrester is connected individually to an electrical

service panel that is protected with a UL Listed 20A

(Minimum) Circuit Breaker for overload protection of the

surge arrester.

7. All doors and accessories must be grounded.

CAUTION Avoid potential personal injuries

and property damage!

1. Elevated Operating Ambient - If installed in a closed or

multi-unit rack assembly, the operating ambient

temperature of the rack environment may be greater than

room ambient. Therefore, consideration should be given to

installing the equipment in an environment compatible with

the maximum ambient temperature (0-40°C/32-104°F)

specified by the manufacturer.

2. Reduced Air Flow - Installation of the equipment in a rack

should be such that the amount of air flow required for safe

operation of the equipment is not compromised.

3. Circuit Overloading - Consideration should be given to the

connection of the equipment to the supply circuit and the

effect that overloading of the circuits might have on

overcurrent protection and supply wiring. Appropriate

consideration of equipment nameplate ratings should be

used when addressing this concern.

4. Reliable Earthing - Reliable earthing of rack-mounted

equipment should be maintained. Particular attention

should be given to supply connections other than direct

connections to the branch circuit (e.g. use of power strips).

NOTE:

This system has no user serviceable parts.

--SAVE THESE INSTRUCTIONS--

Produkt Specifikationer

Mærke:	Chief
Kategori:	Ikke kategoriseret
Model:	NAPDH11L

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief NAPDH11L stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Chief Manualer

6 Juli 2025

6 Juli 2025

6 Juli 2025

3 April 2025

3 April 2025

2 April 2025

Chief PSMO2168SC Manual

28 Januar 2025

Chief Kontour KRA300B Manual

15 Januar 2025

Chief Kontour KRA243S Manual

15 Januar 2025

Chief CMA480W Manual

1 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Cres Cor H137WSUA5D Manual

20 August 2025

Moulinex Pulseo LM17GD Manual

20 August 2025

Tefal EasyGrill BG1303 Manual

20 August 2025

Tenda U2 Manual

20 August 2025

Tefal Ultraglide Plus FV5841 Manual

20 August 2025

Tefal I-Coach Touch QB950D Manual

20 August 2025

BEKO BDIN38551P Manual

20 August 2025

BEKO FSE52135DCRSN Manual

20 August 2025

Karma PRJ 5000 Manual

20 August 2025

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025